copper sheets

[spyghost]

any idea where i can buy copper sheets - 1.5mm thickness will do

[bmac]

Try Sta Cruz Manila, mga industrial hardware

May I ask, where will you use it?

Cheers

[spyghost]

any shop names you have or specific area in sta. cruz?

[bmac]

can't remember all my suki shops name pero alam ko puntahan, paxenxa nandito na ako sa Australia

go to t mapua, & t alonzo. mabait naman mga tao ituro ka kung saan meron

balitaan mo ako kung meron ka nabili

cheers

[spyghost]

can't remember all my suki shops name pero alam ko puntahan, paxenxa nandito na ako sa Australia

go to t mapua, & t alonzo. mabait naman mga tao ituro ka kung saan meron

balitaan mo ako kung meron ka nabili

cheers

i got a 100x100x1.5mm copper sheet in t alonzo for 150. coming from recto, it's the first shop located on the left side that sells metals, alum, brass, copper, etc... there are 2 other shops that sell similar mixed metals, but i was in a hurry so i went to the shop that opened first after their lunch break.

i used it for shimming the gpu/heatsink of my laptop. project was successful, i had the temp brought down by 10C. laptop is dell m1330

[rosy]

WOW ! This is such great information since I'll be needing some brass or copper sheets in the near future.
Thanks a lot for sharing this info bro spyghost.

[balarila]

Good info for me, too. I may need a plate as lightning ground for my boat.

[miked]

i used brass shim stock sometime for vehicular application. but on thousands of an inch thickness variations...nabili ko sa suki kong auto supply. brass is an alloy of copper and (forgot the other element) it might also serve some other purpose. hth

[bmac]

i got a 100x100x1.5mm copper sheet in t alonzo for 150. coming from recto, it's the first shop located on the left side that sells metals, alum, brass, copper, etc... there are 2 other shops that sell similar mixed metals, but i was in a hurry so i went to the shop that opened first after their lunch break.

i used it for shimming the gpu/heatsink of my laptop. project was successful, i had the temp brought down by 10C. laptop is dell m1330

Congrats mate!