Vespa Compressor

[Software]

Bros, looking for reliable store(s) that sells genuine vespa compressor.

Store Name
Phone #

Thanks

[violaine]

hehe until now what i still have is a 0.5hp Shinko air compressor just to drive my nailer...

i do not know why you look for a Vespa while it has a lot of counterfeits..and even the original Vespa isnt perfect in terms of belt alignments etc...

and so i wonder why until this time some people look for a Vespa...(well its not the Vespa scooter)

with the advent of newer taiwan made tools like air compressors..i have my eyes now on an upright 2.5HP Powercraft...cfm at around 8...otherwise, id be happy with a campbell-hausfeld.

btw, san mo ba gagamitin compressor mo?

:smshocked:

[violaine]

ei...i didnt get to answer your question but surely Timber has got a genuine Vespa..here is hoping he could point you to the store location and phone number.

:clap:

[rosy]

@ V, I too am eyeing the 2.5 HP upright POWER CRAFT compressor for my future use on air powered tools, I just don't know if this will be sufficient enough for the aired tools I plan to buy in the future. :p :)

Sabi ni kuya JAY, dapat daw at least 3 HP para daw powerful ang mga air tools, !!!!! :dog1: :clap:

[violaine]

we have two choices bro...the 2.5hp at 18K and the bigger 4.5HP that can be had at 27K..i am sure the 4.5HP can power all your pneumatic tools in the future! hehe

hoping for a prosperous new year to you!

V

[JayL]

I saw and checked that 27K Powercraft before. I almost purchased it but LYS had no stock. While waiting I saw a used 3HP Speedaire and took my chance. It needed a lot of work to restore it to pristine condition but looks much beefier than the Powercraft for roughly the same cost.

To answer OP's question.

I found Best Achievers in T. Alonzo to have the best prices for Vespa Compressors. I purchased a 1 HP and a 2 HP Vespa from them.

http://www.eyp.ph/search?q=best+achievers&loc=&vstype=basic&fzq=&x=45&y=20

[Software]

hehe until now what i still have is a 0.5hp Shinko air compressor just to drive my nailer...

i do not know why you look for a Vespa while it has a lot of counterfeits..and even the original Vespa isnt perfect in terms of belt alignments etc...

and so i wonder why until this time some people look for a Vespa...(well its not the Vespa scooter)

with the advent of newer taiwan made tools like air compressors..i have my eyes now on an upright 2.5HP Powercraft...cfm at around 8...otherwise, id be happy with a campbell-hausfeld.

btw, san mo ba gagamitin compressor mo?

:smshocked:

nailgun :)

[timber715]

nailgun :)
sus, kung nail gun lang gagamitan mo, you can get the cheapest you can find. it only needs 0.3 cfm...

[violaine]

sus, kung nail gun lang gagamitan mo, you can get the cheapest you can find. it only needs 0.3 cfm...

susginoo...akala namin MegaVespa kailangan mo..hehehe

:attack:

[JayL]

Up the ante brother .... get the biggest you can possibly get. Sooner or later you will find a lot of use for a "capable compressor" in your shop. :)

[Software]

at saka sa pangpintura pala ng mga gagawain furniture, meron ako nabili na sprayer.

http://i1141.photobucket.com/albums/n583/fox-bat/Woodworking/Sagola3300Pro2.jpg

Technical data (http://www.sagola.com/index.php?zon=ind&pro=02&num=1&lang=en)

pwede na kaya 1/2HP dito?

bebenta ko din pag tapos na mga project sa bahay.

Salamat

[JayL]

Ayan nag iba na specs ... ibang league na yan.

Let's see what other members have to say but for me malamang 1 HP Vespa Belt Driven Oiled compressor ( 88L ) minimum ng ganyan spray gun.

http://www.sagola.com/index.php?zon=ind&pro=02&num=1

[timber715]

ano technical data ng gun mo? i should have the required cfm consumption...

[Software]

at saka sa pangpintura pala ng mga gagawain furniture, meron ako nabili na sprayer.

http://i1141.photobucket.com/albums/n583/fox-bat/Woodworking/Sagola3300Pro2.jpg

Technical data (http://www.sagola.com/index.php?zon=ind&pro=02&num=1&lang=en)

pwede na kaya 1/2HP dito?

bebenta ko din pag tapos na mga project sa bahay.

Salamat


Technical data (http://www.sagola.com/index.php?zon=ind&pro=02&num=1&lang=en)

[rosy]

Bro software,

Reading the TECHNICAL DATA supplied, I guess you will need a 2HP COMP. basing it on the EPA and HVLP reading to achieve a high quality paint application on your intended projects.

Oh by the way, what will you sell then after use, the spray gun or the compressor, or both ?, just curious bro.

[timber715]

Bro software,

Reading the TECHNICAL DATA supplied, I guess you will need a 2HP COMP. basing it on the EPA and HVLP reading to achieve a high quality paint application on your intended projects.

Oh by the way, what will you sell then after use, the spray gun or the compressor, or both ?, just curious bro.
380 l/min ang rating ng hvlp, I really don't feel like converting to l/min to cfm but I feel na bitin ang 2hp. But, that is for ideal rating, meaning you don't have to get the suggested cfm unless you plan on spraying continuously, if you can pause in between panels or walls then a 2hp would suffice.

[Software]

380 l/min ang rating ng hvlp, I really don't feel like converting to l/min to cfm but I feel na bitin ang 2hp. But, that is for ideal rating, meaning you don't have to get the suggested cfm unless you plan on spraying continuously, if you can pause in between panels or walls then a 2hp would suffice.

Mahal ng 2HP :(


Bro software,

Reading the TECHNICAL DATA supplied, I guess you will need a 2HP COMP. basing it on the EPA and HVLP reading to achieve a high quality paint application on your intended projects.

Oh by the way, what will you sell then after use, the spray gun or the compressor, or both ?, just curious bro.

parehas, kasama yung iba pang tools.

[JayL]

I just checked my 1 HP Vespa belt driven compressor . It's only 215L / minute.

[rogin24]

at saka sa pangpintura pala ng mga gagawain furniture, meron ako nabili na sprayer.

http://i1141.photobucket.com/albums/n583/fox-bat/Woodworking/Sagola3300Pro2.jpg

Technical data (http://www.sagola.com/index.php?zon=ind&pro=02&num=1&lang=en)

pwede na kaya 1/2HP dito?

bebenta ko din pag tapos na mga project sa bahay.

Salamat

Good morning, ask ko lang magkano ang bili mo nitong spray gun