Woodworking 101: Some basic information


Share it with your friends Like

Thanks! Share it with your friends!

Close

Woodworking is a fine craft with a noble history that stretches back centuries, or even millennia. The fine woodworking craftsmen throughout history paved the way for a multitude of different and custom woodworking projects. Although woodworking requires creativity, it also requires knowledge. The tips below will help you gain insight into this amazing world.

Woodworking Tips:

Anytime that you begin a new project you must consider your safety first. Always use your tools properly while wearing adequate safety equipment. Avoid taking off the guards on power tools; they are meant to protect you. You do not want to start a woodworking project and end up in the hospital.

Create sanding blocks you can reuse. Cut six 3/4″ pieces of plywood for each sandpaper grit. Make sure they are about 2.5″ x 4.75.” You can secure the sandpaper better with an adhesive. Stick a block to the cork, making sure to cut the cork flush with a utility knife. Spray adhesive on your sandpaper, and then stick it to every cork block, facing down. Then cut the sandpaper that is flush with the cork and label the blocks.

TIP! Consider making your own sanding blocks that can be used again and again. You will need three-quarter-inch plywood cut into six blocks.

Carpenter Square

Stair gauges can be used for crosscut guides. To use, clamp the gauges to a carpenter square. Then mark the notches. If they’re on the same carpenter square’s tongue, that combination can create the perfect guide for a crosscut using a circular saw.

When creating a budget, don’t forget to itemize any new tools that you’re going to need to buy. It’s easy to just overlook things because you’re thinking of the cost of lumber and that’s all. But, if you need other things that you don’t own and didn’t think about, you can really mess up your budget and may not be able to finish your project.

TIP! It is important that you have a realistic idea of your budget and what you can make with it. It is easy to miscalculate costs when it comes to woodworking projects.

While you might like keeping a small ruler handy in your pocket, you probably find that it falls out every time you bend over. To stop this from happening buy a metal ruler and place it in the same pocket where you keep your telescoping magnets, used for picking up nails and wood screws. Keep the ruler and the magnet in the same pocket. The ruler will stay in place.

Ear protection is important. A wood shop can be extremely noisy. Extended exposure to such noise can cause hearing loss. You can get throwaway ear plugs or you can buy expensive headphones. Make certain that you use some form of protection when operating machinery.

Footwear is an important component of your safety equipment. Where you’re working there will be tools, nails, and wood pieces everywhere. Stepping on a nail can really hurt your feet! The shoes you wear must be sturdy so as to protect your feet from injury in your work environment.

TIP! When you are budgeting for new projects, don’t forget to set aside money for any tools you need. Some people miss this step and their budget is quickly blown.

Don’t always rely on your tape measures. You can work into a cut by using a story stick. Using scrap wood for your cuts is preferable because you can try out a fitting first. It’s best to go into your project well-prepared.

Always talk with other woodworkers. Your woodworking area is probably your private space and lacks Internet access. You may find yourself confused or at a loss on a given project. Ask your peers for answers to questions, ideas or support. No woodworking problem will ever present itself to you that someone else hasn’t battled before.

Incorporate your woodworking skills in yard projects. You can build a bird feeder to add an aesthetic beauty to your backyard. You can sit back and watch the birds and come up with your next woodworking project. If you are a woodworking professional, try displaying your work to clients by meeting them on your deck.

TIP! Inquire about tutorials on tools that you are renting. Quite often, they’ve got specialists available that can help you get comfortable with the tool faster than if you learned it on your own.

Woodworking does not get the recognition it deserves from consumers. Most people imagine sitting in chairs. A woodworker will look at wooden blocks and see the chair. When you have information like the information in this article, that will separate you from the pack in woodworking, and you can be a true professional.

Comments

Comments are disabled for this post.