[COLOR="Red"]World class laminate
http://www.worldclasslaminate.com/index.asp
see website for office number and address
warehouse at 88 Jenny's avenue, Pasig, Q.C.
warehouse tel no. 6281009
Impression:
fairly big company. Professional enough. They allow buying directly at the warehouse BUT be ready to wait 30 minutes before your order comes out
Not that proficient in technical aspects (or i may have talked to the wrong people)
Useful service: They provide heat activated glue on their pvc edge bands.
Re: MDF supplier
you can actually have the MDF pre-cut for 30pesos per cut iirc. saves your blades and keeps yuor air clean. mdf particles is something I hate most...
click my signature and it will take you there........
Re: MDF supplier
really? dang, i didnt ask... it couldved saved me alot of trouble . Then all i have to worry is assembly 🙂
Re: MDF supplier
cabinet makers locally do this, they have the mdf cut ti their specs, they just assemble and sell...
click my signature and it will take you there........
Re: MDF supplier
World class laminate
http://www.worldclasslaminate.com/index.asp
see website for office number and address
warehouse at 88 Jenny's avenue, Pasig, Q.C.
warehouse tel no. 6281009Impression:
fairly big company. Professional enough. They allow buying directly at the warehouse BUT be ready to wait 30 minutes before you order comes out
Not the proficient in technical aspects (or i may have talked to the wrong people)
Useful service: They provide heat activated glue on their pvc edge bands.
hey.. got a place near here. thanks for the input. will check them out one of these days.
ps: pasig, qc?
Safety first - always wear face/eye/ear/hand protection as a minimum.
Re: MDF supplier
hahaha oo nga no Pasig, QC
i come from libis, go to ortigas extension (heading towards antipolo) then turn right at C. Raymundo then turn left at south star drug??? and then i start asking around. I am forgertful and categorically dyslexic in directions so yeah. Actually iam not very sure about the south star drug either... i am only sure uptil c .raymundo.. i know i have to turn left at south start drug somewhere.
most folks on their receiving end of the phone are kinda not so friendly. Except Rose.. i think... i think thats her name.
they also have some hardware, but limited. There are Hi-Lo screws , the ones whose threads alternatie from wide to narraow (best for mdf apparently and good for plywoods too!). these hold up to by screw bit better than Hafele's and they are the same specifications. Hafele's hi lo screws are too maleable hence very easy to lose the philips groove
The lamination on the mdf however is Thinner than Multi-Rich, this is comparing the basic white matte laminated mdf
Re: MDF supplier
once you turn left at south star drug, that's legaspi st. now, you turn left or right in to Jennys? coz Jennys Ave. crosses legaspi st.
Safety first - always wear face/eye/ear/hand protection as a minimum.
Re: MDF supplier
yup yup thats right. Now i remember 🙂
Re: MDF supplier
Hi all, I'm a new member from Toledo City, Cebu. Nice links here, and some helpful stuff from members.
Do they really have all that colored melamine boards? Do they have a branch in Cebu where I live? Or can they send to Cebu? I am really looking for 15 mm plain white boards for kitchen cabinets.
Re: MDF supplier
I cannot see any provincial branch from their contact page. Probably you may give them a call and they may be able to give you dealers of their products near your place.
Re: MDF supplier
hahaha oo nga no Pasig, QC
i come from libis, go to ortigas extension (heading towards antipolo) then turn right at C. Raymundo then turn left at south star drug??? and then i start asking around. I am forgertful and categorically dyslexic in directions so yeah. Actually iam not very sure about the south star drug either... i am only sure uptil c .raymundo.. i know i have to turn left at south start drug somewhere.
most folks on their receiving end of the phone are kinda not so friendly. Except Rose.. i think... i think thats her name.
they also have some hardware, but limited. There are Hi-Lo screws , the ones whose threads alternatie from wide to narraow (best for mdf apparently and good for plywoods too!). these hold up to by screw bit better than Hafele's and they are the same specifications. Hafele's hi lo screws are too maleable hence very easy to lose the philips groove
The lamination on the mdf however is Thinner than Multi-Rich, this is comparing the basic white matte laminated mdf
I agree, sales representatives are not friendly
Re: MDF supplier
World Class Laminate sa Pasig ay production plant nila. Mostly pumupunta doon ay mga regular costumer diretso PO agad or pickup ng items.
They have their sales office in QC.
World Class Laminates
Room 606, Future Point Plaza 1
112 Panay Avenue, Quezon City
Kung mag-inquire ka regarding sa laminated boards. I suggest sa QC office ka muna magpunta meron sales representative na mag-assist sa iyo. Pwede ka humingi ng swatches at pricelist. Just look for Irma.
hi everyone. i am looking for 3mm mdf boards, preferrably single face laminated na may cutting service. pwede rin kahit hindi laminated as long as malinaw yung color ng mdf. other suppliers i buy from kasi medyo dark yung board. meron po bang nakaka-alam or can recommend cutting services for this type. manipis lang need ko 3mm. I find it hard to cut the boards myself so I am looking for a cutting service who can do it for me. we consume around 30-50 boards per month and looking forward to increase the volume.
hope to hear from you guys. thanks!
pag usapan natin,for cutting melamine board,
09206436594,tnx arnold
