Hihingi lang sana ng tulong sa mga experts natin dito. Meron pa kasi akong nakuhang bahay dito sa Montalban, bale bare type sya at Single Attached.
Naka attached po yung Lot at Floor area ng bahay na nakuha ko. Pede akong kumuha ng Contractor sa pagpapagawa. Yung requirements ng Developer kc eh 1.8 meters daw yung taas ng harap mga 10 Hollowblocks (kasama napo yung naka baon) yung sa likod.
Diko maintindihan kc na yung mga taga doon na gumagawa, binibigyan nila ako ng estimate na 70,000 pesos, at yung isa naman 90,000 pesos. Lahat na daw kasama - labor and materials.
Medyo parang napaka mahal naman yata, pero sabi ng Engineer dun, mahal daw ang presyo ng bakal at semento.
Eto nga ho pala yung picture:
Yung total Lot Area is 63sq.m. bale yung bakod at yung flooring is 2m boundary in each side of front, side and back walls - paki tingin nalang po yung pic (medyo maliiit pala). Parang pa "U" shape sya.
Sana po merong makatulong sakin, kc medyo bina budget ko talaga yung pera. Maraming salamat ho.
Re: Concrete Fencing with Steel Gate
bro medyo mahal talaga pag may contractor na kausap. 30% ang patong nila sa laht, some times labor and matterials pinapatungan ng 30% each. yung project ko nga na 5m x 5m na garahe yung pinaka flooring pa lang 11k na ang singil sa labor lang. wala pang matteryales yon.
maybe you can get a quotation from vazbuilt, ang ganda ng mga perimiter fence nila compared to hollow blocks na wall.
Re: Concrete Fencing with Steel Gate
kung ubra lang na kaming lahat dito sa PHM dumayo jan sa inyo..parang gawad kalinga ba! hehe
mahal na talaga materiales nowadays..
how much na semento ngayon? portland?9mm and 10mm deformed steel bars?
sana me section ang PHM ng price watch ng common construction materials..hehe
you cant be sure pa sa materyales kung contrata.unless naka specify.
hoping makatipid ka in the long run bro.
The devil will find work for idle hands to do.-Morrissey
Re: Concrete Fencing with Steel Gate
ano nga kaya magsanib pwersa lahat sa isang project tulad ng sabi ni sir violaine? hehe
[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!
Re: Concrete Fencing with Steel Gate
can you post your total perimter for the wall? if your area is 63sqm more or less 7sqm length of each side of the perimeter. so the total length of the wall is 7 x 4 = 28meters
lets assume 2 mason at 1 steel worker siguro pwede na for 2 weeks (this is based on experience lang so its not very quantitative). so assume average wage nila is 400 per day, 3 persons per day. So 1,200 pesos per day.
Tapos 14 days. so lalabas nun 16,800 labor only
yung total area ng wall is 1.8 meters x 28 meters (length of wall) = 50 square meters wall area.
each hollow block is 0.20m x 0.41m = 0.082 square meters per hollow block
50 divided by 0.082 = 610 hollow blocks
8 inch hollow blocks are ... crap di ko na alam price.. i think its uhhh 15??
so 610 x 15 = 9,150
so labor plus hollowblock = 25,950 pesos
Thats as much as i can estimate. May cement , buhangin, gravel at rebards pa kulang.
I agree also with Twisted, try mo vazbuilt. it has a guaranteed pressure rating of 3,500 psi ata. Plus PULIIIIIDOOONG PULIDOOOOO. at mabilis. if its near the prices of the contractors , then go for vazbuilt.
Re: Concrete Fencing with Steel Gate
I don't have much to add here but, regarding the steel gate- you might want to consider pillow block bearings as the hinges. I don't know exactly the bearing number of those (i'm guessing one or both are self aligning to compensate for slight misalignment) or bore diameter... I just notice that they carry large heavy gates well without sagging for years and they're smooth to open. No need for turnbuckled cables or caster on the bottom =).
