any idea where i can buy copper sheets - 1.5mm thickness will do
Re: copper sheets
Try Sta Cruz Manila, mga industrial hardware
May I ask, where will you use it?
Cheers
Re: copper sheets
any shop names you have or specific area in sta. cruz?
Re: copper sheets
can't remember all my suki shops name pero alam ko puntahan, paxenxa nandito na ako sa Australia
go to t mapua, & t alonzo. mabait naman mga tao ituro ka kung saan meron
balitaan mo ako kung meron ka nabili
cheers
Re: copper sheets
can't remember all my suki shops name pero alam ko puntahan, paxenxa nandito na ako sa Australia
go to t mapua, & t alonzo. mabait naman mga tao ituro ka kung saan meron
balitaan mo ako kung meron ka nabili
cheers
i got a 100x100x1.5mm copper sheet in t alonzo for 150. coming from recto, it's the first shop located on the left side that sells metals, alum, brass, copper, etc... there are 2 other shops that sell similar mixed metals, but i was in a hurry so i went to the shop that opened first after their lunch break.
i used it for shimming the gpu/heatsink of my laptop. project was successful, i had the temp brought down by 10C. laptop is dell m1330
Re: copper sheets
WOW ! This is such great information since I'll be needing some brass or copper sheets in the near future.
Thanks a lot for sharing this info bro spyghost.
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Re: copper sheets
Good info for me, too. I may need a plate as lightning ground for my boat.
Re: copper sheets
i used brass shim stock sometime for vehicular application. but on thousands of an inch thickness variations...nabili ko sa suki kong auto supply. brass is an alloy of copper and (forgot the other element) it might also serve some other purpose. hth
Re: copper sheets
i got a 100x100x1.5mm copper sheet in t alonzo for 150. coming from recto, it's the first shop located on the left side that sells metals, alum, brass, copper, etc... there are 2 other shops that sell similar mixed metals, but i was in a hurry so i went to the shop that opened first after their lunch break.
i used it for shimming the gpu/heatsink of my laptop. project was successful, i had the temp brought down by 10C. laptop is dell m1330
Congrats mate!