Forum

Share:
Notifications
Clear all

Looking for Acrylic Sheets

12 Posts
9 Users
0 Reactions
57 Views
(@manggyver)
Posts: 70
Trusted Member
Topic starter
 

Am beginning to love acrylic in most of my projects, whether at home or at place of work. Downside, a little bit pricey. Sample of price/size i got from the field as ff:

Thickness / Width / Length...... Clear or White / Colored
1/6 x 4 x 6.... Php 1,716/Php 2,028
1/8 x 4 x 8.... 3,000/3,300
3/16 x 4 x 8.... 4,400/4,900

2mm x 4 x 6.... 1,794/2,106

Anybody there who can direct me to a better supplier?? Thanks.

 
Posted : 24/11/2009 10:40 am
(@bluecollar)
Posts: 9
Active Member
 

Re: Looking for Acrylic Sheets

modern art
tel. no. 7247607
Look for Noela

 
Posted : 25/11/2009 11:15 pm
(@manggyver)
Posts: 70
Trusted Member
Topic starter
 

Re: Looking for Acrylic Sheets

modern art
tel. no. 7247607
Look for Noela

Thank you. I will check them out. I will also post there prices if they are better.

 
Posted : 26/11/2009 9:09 am
 guad
(@guad)
Posts: 646
Honorable Member
 

Re: Looking for Acrylic Sheets

Where did those prices come from?

How about Manila Acrylic Center, 241-0669. Can you post their prices if they are lower?

Is a special drill bit needed?

 
Posted : 26/11/2009 10:17 am
(@manggyver)
Posts: 70
Trusted Member
Topic starter
 

Re: Looking for Acrylic Sheets

Where did those prices come from?

How about Manila Acrylic Center, 241-0669. Can you post their prices if they are lower?

Is a special drill bit needed?

Prices quoted above came from AU Construction. I will make comparisons, will check them later. Am using a uni-bit or step-drill bit.

Check this site to convert regular bits for plastics or acrylics.
http://www.hawkfish.org/snailman/acrdrill.htm

 
Posted : 26/11/2009 1:31 pm
(@saintmaker)
Posts: 30
Eminent Member
 

Re: Looking for Acrylic Sheets

I want to engage to acrylic too. Have you been bending acrylic? How do you do it and tool do you use.

 
Posted : 23/08/2010 12:09 am
B2Bomber
(@b2bomber)
Posts: 149
Estimable Member
 

Re: Looking for Acrylic Sheets

OT:

I want to engage to acrylic too. Have you been bending acrylic? How do you do it and tool do you use.

heat gun and some sort of a clamping jig. you might want to search for more of this, particularly the proper heating tool, be it DIY or not, if you're looking at bending wider pieces. as this would ensure even heat where you want it to bend as compared to multiple passes of a heat gun.

HTH

BTT:
in my area I source out acrylic sheets from my local Aguila Autoglass shop. If i'm lucky they might have a cut sheet close to the dimensions I need already, saves the hassle of having to buy the whole sheet.

HTH

Safety first - always wear face/eye/ear/hand protection as a minimum.

 
Posted : 23/08/2010 2:19 pm
ossie
(@ossie)
Posts: 1210
Noble Member
 

Re: Looking for Acrylic Sheets

im using my magic lamp (denatured alcohol-remember our laboratory subjects) on bending small piece of acrylic.

with wider/long pieces of acrylic, im using my DIY acrylic bender (nichrome wire).

and for cheaper way of smoothing the acrylic edges, im using 3M rubbing compound. a small amount with small piece of cloth will do the trick 🙂

[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!

 
Posted : 07/10/2010 6:48 pm
 moji
(@moji)
Posts: 951
Prominent Member
 

Re: Looking for Acrylic Sheets

Do you have pics of your DIY acrylic bender?

 
Posted : 07/10/2010 7:27 pm
ossie
(@ossie)
Posts: 1210
Noble Member
 

Re: Looking for Acrylic Sheets

hehe i think we are OT na and i think gawa tayo ng bagong thread all about Acrylics hehe pero post ko na din sir Moji, just taken minutes ago.

rev.2, need to revised again, medyo nai-narrow ko masyado yung opening at ibabalik ko ulit yung heat resistant mdf (forgot the name of the board). im using micca on that picture. plus the plug 😀

[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!

 
Posted : 07/10/2010 8:04 pm
(@akosirhaven)
Posts: 1
New Member
 

good day,

where can i buy custom size acrylic sheet (2x2feet 5mm/ (2x2feet 10mm)

thanks in advance,

 
Posted : 14/07/2016 3:50 pm
rosy
 rosy
(@rosy)
Posts: 4307
Member
 

Bro, kindly introduce your self to the forum, we have a Member Introductions at the lower part of the PHM index page.
Please do tell us your interest or hobbies and where are you from. Nothing really personal, we'd like to know you more as as a new member of this community.

Thanks,

rosy

CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw

 
Posted : 14/07/2016 8:43 pm
Share: