Forum

Share:
Notifications
Clear all

Plywood in Mactan/Cebu?

9 Posts
6 Users
0 Reactions
129 Views
(@lemondeaf)
Posts: 4
New Member
Topic starter
 

Good Morning,
Is there a supplier of 9mm and 12mm (8'x4') sheets of plywood in Mactan or Cebu city?

Thanks All

 
Posted : 04/03/2011 9:08 am
timber715
(@timber715)
Posts: 5424
Member
 

Re: Plywood in Mactan/Cebu?

you might find it harder to find a 9mm plywood there since most hardware stores carry 12mm or 1/2'' and 18mm or 3/4" plywood. I am aware btw that 12mm and 1/2" are not the same but since the later is undersized, it fall perfect to 12mm.
I never bought plywood while I'm in Cebu but I do often get Mahogany there, a bit distant from Mactan though... unless you need a large amount, I suggest the local hardware stores should have them available, if you are close enough from them, you might even have them deliver for a small fee or even free...


click my signature and it will take you there........

 
Posted : 04/03/2011 12:22 pm
(@lemondeaf)
Posts: 4
New Member
Topic starter
 

Re: Plywood in Mactan/Cebu?

Thanks for the reply, I have tried 2 hardware stores who only stock 3mm, 4mm, 5mm and 18mm plywood.
1/2" and 3/8" would be ok for my purpose to build a sawboard. I only need 1 sheet of each.

 
Posted : 04/03/2011 12:52 pm
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Plywood in Mactan/Cebu?

[HTML]sawboard[/HTML]

sawboard? i have no idea.
what is it for?
thanks

The devil will find work for idle hands to do.-Morrissey

 
Posted : 04/03/2011 7:02 pm
(@joey81)
Posts: 1098
Member
 

Re: Plywood in Mactan/Cebu?

Looks like a circular saw fence guide:

http://tomsworkbench.com/2008/11/12/great-jigs-the-sawboard/

So that's what its called.

 
Posted : 04/03/2011 8:25 pm
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Plywood in Mactan/Cebu?

if thats the case then..he may have plenty of circular saws..hehe

wishing we have a 1/4" thick hardboard here...but not the lawanit (lauanit?...)

The devil will find work for idle hands to do.-Morrissey

 
Posted : 04/03/2011 9:37 pm
 guad
(@guad)
Posts: 646
Honorable Member
 

Re: Plywood in Mactan/Cebu?

May be overkill, but if you can't find 9 or 12 mm from usual stores, an option would be the higher quality TUFF brand of marine plywood by Emco Plywood. Supposedly there are two dealers in that area, Vic Enterprise, 232-1661 and MP Traders, 345-2991. Or contact Emco rep directly, 922-TUFF-PLY, [email protected].

Their 9 and 12 mm are both 7 ply. 12 mm is the one in the middle below.

 
Posted : 05/03/2011 12:00 am
timber715
(@timber715)
Posts: 5424
Member
 

Re: Plywood in Mactan/Cebu?

if the saw board you have in mind is a circular saw edge guide, 1/4" plywood bottom with a 3/4" guide should do the trick, would even be advantageous since it will only reduce you depth of cut by 1/4". the bottom board is mainly there as a blade reference anyway...
goodluck...


click my signature and it will take you there........

 
Posted : 05/03/2011 12:54 am
(@jo252011)
Posts: 10
Active Member
 

Re: Plywood in Mactan/Cebu?

try Evergreen 032-3462096 look for ann. am not sure if they do have 9mm but they have lot of marine plywood including furniture grade and boat making marine plywood.

 
Posted : 05/03/2011 9:09 pm
Share: