i've seen many RT designs, but nothing beats the master's RT .
simple, very versatile, and lots of bits storage.
this is no de-luxe, ultimate or all weather RT i am doing,
but the master's design, does it all for the RT.
having some of the basic RT accessories, the plate, t-tracks, and phenolic board,
it's time to replace my old RT.
to see the basic sketches , just visit this thread....
sensya na, hindi pa marunong ng sketch-up.-
w.pinoyhandyman.com/showthread.php?t=833
i-share ko lang kung paano ko ginaya yung master's RT.
it's a long weekend, at dumating ng hindi ina-asahan yung phenolic board,
kaya na-divert sa RT build yung binabalak na ibang projects.
to start with the build...
i came up with the materials.
2 pcs 3/4 plywood and a 2x6 lumber, for the table top edges.
then cut using a straight-edge guide, onto the sawhorse.
Re: my router table build.
cutting a dado, using a two part dado technique...
Re: my router table build.
then sanded,
for the application of the epoxy primer ( some are leftover epoxy primer, freshen the paint with the use of epoxy reducers )...
then sanded again...
tommorrow if time permits, will coat it with epoxy enamel ( also my left over paint )
Re: my router table build.
Master Jonathan
Wow!!!!! sigurado maganda kalalabasan yan phenolic board ang gamit hehehe :thumbup: tapos na ba?
Re: my router table build.
ayos yan Jonathan, sabi ko na nga ba may ginagawa din tong mamang to.
Same here, time out muna ako sa mga projects. Looking forward for your finished RT, di man kasing high tech ng RT ni Ryobiwankinobe at least its a major upgrade from your present RT. 😉
Re: my router table build.
ryo,
kaw dyan ang master no !!!
pre-finishing pa lang ako,
hindi ko pa nakakalikot yung phenolic board.
long wait pa ito bago ma-finish...
mabagal, kasi isinisingit ko lang pag di busy...
armand,
tama ka brad, wala akong panama sa galing ng mga masters dito, at kasama na rin.
i really need to build a good RT,
para magamit ko na yung plate ko,
pati na rin storage ng mga router bits and accessories.
just applied 1st coat ng epoxy enamel,
lagyan ko pa ng 2nd coat yung areas needed.
thanks to both of you...
Re: my router table build.
Kung meron mang "Most Industrious' award ang PHM, si Jonathan ang da best! Your projects never ceases to shower some inspiration amongst the members.
In the arts, the passion and satisfaction way surpasses the quality or complexity of work. Kudos to to you Jonathan!
Re: my router table build.
:sweat:no comment muna, antayin ko mabuo... wala pa akong makita na shape. though I'm sure it will come out very well, no comment muna:sweat:
click my signature and it will take you there........
Re: my router table build.
swak na swak mga wips post this november ah! sa kabila yung monster homemade jointer ni armand tapos dito...another rt by jon...
wala akong project....i am overseeing the repainting ng ancestral house namin dito sa province.
kaya post lang ng post mga tol!
be safe!
enjoy your rt build jon!
see you soon.
V
The devil will find work for idle hands to do.-Morrissey
Re: my router table build.
jarod,
what inspire's us the most, are the masters here at PHM,
what i learn from them, i apply...
thanks brad.
timber,
wala naman pinagka-iba tong RT design neto sa RT mo,
kaya i'm sure it will come out well...
V,
grabe nga ng mga abilidad ng mga masters dito, napapa-iling nalang ako sa projects nila, monster ika nga...
enjoy your stay there at your province...
thanks!!!
Re: my router table build.
Subscribed.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: my router table build.
nice project idol! aabangan namin yan.
bibiglain mo na naman kami ng WIP(work in pinish) mo hehehe
safety first...
[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!
Re: my router table build.
here's an update of my RT build.
just finished pre-coating it with epoxy enamel last weekend.
takes 2 days,
takes a day till the 1st coat dries, then re-coat.
Re: my router table build.
nice project idol! aabangan namin yan.
bibiglain mo na naman kami ng WIP(work in pinish) mo hehehe
safety first...
wag ka mag-alala idol ossie,
trying my very best to update the build at the time of the WIP ( works in progress ) as possible.
very busy lang talaga...
sorry for the slow progress of the RT build...
pasingit-singit lang kasi...
Re: my router table build.
and here's my recent WIPS...
had an ample time for the assembly of the cabinet...
made some corrections on some issues.
then checked until the top ( phenolic board ) will be flat with the carcass top edge ...
still not enough time...
next will be the back cover...
