Forum

Share:
Notifications
Clear all

Shellac...

57 Posts
12 Users
0 Reactions
438 Views
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: Shellac...

Does shellac keep? If you dissolve too much, can you keep it in a tupperware and keep indefinitely?

As you apply it, will the alcohol evaporate? If it does, can you add more?

I recall, as a kid, my father taught me how to "muniego" my wooden toolbox which involved applying a varnish-like liquid using a ball of old cotton TShirt (I thought it was varnish at that time). Is muniego (don't know proper spelling) what shellacing is called?

I don't know what muniego is Ding. the shellac has a shelf life a bit longer than 3 months once dissolved (it losses its effectiveness) and once it dries you can add alcohol. you can dilute the mixed shellac anytime.


click my signature and it will take you there........

 
Posted : 18/04/2011 12:49 am
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: Shellac...

time to update this thread, here are some projects finished with shellac.

mirror finish, super kintab, super kinis, wetlook, or whatever...

the best finish i've ever seen...

this one is two times better than that Jon...


click my signature and it will take you there........

 
Posted : 18/04/2011 12:51 am
(@bryant77)
Posts: 480
Reputable Member
 

Re: Shellac...

@timb

Pwede bang matt finish ang shellac?

 
Posted : 18/04/2011 8:14 am
jarod
(@jarod)
Posts: 1222
Noble Member
 

Re: Shellac...

If I may, yes you can apply shellac and have a matte look but still very smooth to the touch. You may use foam abrasives since it will abrade the topmost portion to achieve the matte loo.

For more of the latest tools, deals and tips - click HERE

 
Posted : 18/04/2011 11:15 am
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: Shellac...

thanks Jarod, yes Bryant. like Jarod said you can use a light abrasive to make it lood matte like, but there is an available chemical that you can add to it to make it matte or satin finish. unfortunately wala ako nun 😀


click my signature and it will take you there........

 
Posted : 18/04/2011 11:40 am
(@beedigo)
Posts: 190
Estimable Member
 

Re: Shellac...

@ Sir Timb
Pwede po ba to gamitin sa wood floors or stair steps? Kasi parang ang dali i-apply.

 
Posted : 18/04/2011 8:13 pm
 moji
(@moji)
Posts: 951
Prominent Member
 

Re: Shellac...

As far as i know shellac offers very little in terms of protection. For floors its polyurethane..

 
Posted : 18/04/2011 11:22 pm
jarod
(@jarod)
Posts: 1222
Noble Member
 

Re: Shellac...

If I may (again), PolyUrethane is what most contractors use as flooring finish (wood parquet) because it is way more durable than shellac for foot traffic abuse. Secondly, shellac is not that easy to apply but if you have Popeye with you it could be done 😀

For more of the latest tools, deals and tips - click HERE

 
Posted : 18/04/2011 11:24 pm
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: Shellac...

If I may (again), PolyUrethane is what most contractors use as flooring finish (wood parquet) because it is way more durable than shellac for foot traffic abuse. Secondly, shellac is not that easy to apply but if you have Popeye with you it could be done 😀

he would know :p:p:p


click my signature and it will take you there........

 
Posted : 18/04/2011 11:41 pm
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: Shellac...

you did well today grasshopper 😀 I know its difficult, but once you get through it, everything becomes clear.
don't lose hope...

see what I mean, even sherlock holmes would be pleased...


click my signature and it will take you there........

 
Posted : 19/04/2011 12:53 am
(@balarila)
Posts: 1368
Noble Member
 

Re: Shellac...

As far as i know shellac offers very little in terms of protection. For floors its polyurethane..

Yes, I have polyurethane on all my wood floors at home and they're excellent. 6 years now and still looking great. Only bad part is where the floor meets the door to the outdoor deck. Rain keeps seeping in so the wood has become water-worn. I'll probably pry that section one day and apply epoxy resin on the wood, then use polyurethane.

That's what many boatbuilders do to the hull: apply epoxy resin for waterproofing and strength, then polyurethane for UV protection.

 
Posted : 19/04/2011 7:37 am
jarod
(@jarod)
Posts: 1222
Noble Member
 

Re: Shellac...

That's what many boatbuilders do to the hull: apply epoxy resin for waterproofing and strength, then polyurethane for UV protection.

So I assume this would also be good for outdoor projects like patio chairs, tables and the like? Does it give the wood more flame resistance? Also, would the epoxy resin eliminate the need to termite protection?

Not really pushing the epoxy's limitation, just wondering...

For more of the latest tools, deals and tips - click HERE

 
Posted : 19/04/2011 3:25 pm
(@bigfoot2)
Posts: 362
Reputable Member
 

Re: Shellac...

Can I use VCO with shellac?

Dumb mistakes will always be dumb mistakes, unless . . . . you learn from it, and then it will be learning experience.

 
Posted : 16/05/2011 9:40 am
(@joey81)
Posts: 1098
Member
 

Re: Shellac...

Virgin Coconut Oil?

 
Posted : 16/05/2011 9:55 am
(@bigfoot2)
Posts: 362
Reputable Member
 

Re: Shellac...

yes, VCO-Virgin Coconut oil.

Can I use it during padding? Instruction calls for mineral oil. I was wondering if VCO can do.

Dumb mistakes will always be dumb mistakes, unless . . . . you learn from it, and then it will be learning experience.

 
Posted : 16/05/2011 10:16 am
Page 3 / 4
Share: