Re: Show your Brilliant idea!!!!!!

dismantle all parts

vice clamp the bolt

here it is

get the two part

Re: Show your Brilliant idea!!!!!!

i have t bolt

and then assemble

perfet to my multi t track

Re: Show your Brilliant idea!!!!!!

galeng ryobi...bright idea indeed..instant quick release clamp.

Re: Show your Brilliant idea!!!!!!

galeng ryobi...bright idea indeed..instant quick release clamp.

:thanks: sir armand ...hey you can get quick release handle and bolt @ bike shop no need to buy complete quick release clamp I bought P65.00 pesos per pc here in laguna

mas mura ito sa Quiapo

Re: Show your Brilliant idea!!!!!!

@ryobi,
ah ganun ha! wettaminit!

i need a weekend to tinker on another brilliant idea...hoping it works! hehe

wait lang....

Re: Show your Brilliant idea!!!!!!

@ryobi,
ah ganun ha! wettaminit!

i need a weekend to tinker on another brilliant idea...hoping it works! hehe

wait lang....

hahaha :cheerleader::go::go::barmy: i have a lot Brilliant Ideas sooooon kayo muna hahaha

Re: Show your Brilliant idea!!!!!!

swak nga brilliant idea mo..ok sa stops sa drill press pag gumagaw ng mortise..ayos! asan na ba yung mountain bike ko! ehehehehe

Re: Show your Brilliant idea!!!!!!

"shimano" ang gagamitin ko ryobi, para mas matibay...

grabe ka talaga, very brilliant yang idea mo...

wag ka na magpatumpik-tumpik ryo, ilabas mo na lahat yang brilliant ideas mo at nang magaya namin....

very good ka talaga...:1stplace:

Re: Show your Brilliant idea!!!!!!

Here is a not so bright idea, an alternative toggle clamp . I used this when i was building my laptop table and had to make taper cut on the legs. I needed something to hold the workpiece while doing the cuts, and the improvised toggle clamps worked great .

I took several shots of them again still attached to the taper jig.

.

.

Honestly I hesitated posting this, being cheap.

Re: Show your Brilliant idea!!!!!!

Here is a not so bright idea, an alternative toggle clamp . I used this when i was building my laptop table and had to make taper cut on the legs. I needed something to hold the workpiece while doing the cuts, and the improvised toggle clamps worked great .

I took several shots of them again still attached to the taper jig.

.

.

Honestly I hesitated posting this, being cheap.

Looks very good to me. Simple and effective.

Re: Show your Brilliant idea!!!!!!

Wow!!! Sir Armand that is a Brilliant Idea I`m agee with jay simple and effective and cheap also
Nice work sir Armand and thanks for sharing a great idea ....

:go::groupwave::go:
show some more Brilliant Idea!!! PHM!!!! hehehe

Re: Show your Brilliant idea!!!!!!

Thanks JayL and ryobi.

Necessity is STILL the mother of all inventions. 🙂

Re: Show your Brilliant idea!!!!!!

I was trying the Skil router and got fond of the light to be very helpful. Looking into some of my items, I remembered something that I could use to illuminate the work piece as well.

I remember that I have these magnetic LEDs...

I could attach it to the router through the magnetic head, double sided tape or an additional plate...

Close up shot...I refocused so that the other parts may be visible, it is not as blinding as in the picture.

Re: Show your Brilliant idea!!!!!!

I was trying the Skil router and got fond of the light to be very helpful. Looking into some of my items, I remembered something that I could use to illuminate the work piece as well.

I remember that I have these magnetic LEDs...

I could attach it to the router through the magnetic head, double sided tape or an additional plate...

Close up shot...I refocused so that the other parts may be visible, it is not as blinding as in the picture.

I'll take one brader.... :biggrin: