kahirap talaga maghanap ng ganito lalu na sa probinsya. kayo ba jan mga fellow PHM sa manila area may alam na nagbebenta/nagsusupply neto? plan ko talagang palitan ng steel yung mga copper tubing na nakakabit sa truck ng tatay ko dito sa probinsya
walang magawa pero kelangan magtiis muna sa copper tubing. tapos di pa pulido ang double flaring. initial flare ay pukpok sa martilyo. sunod sa pagpapakamatay yung mga ganitong gamit for autos.
salamat
Re: 3/16" Steel Brake line
try hydraulic shops in your area. just be sure they know what they're doing and they got the correct toys needed to do the job.
Re: 3/16" Steel Brake line
Copper tubing is okay if properly flared and installed..
In fact it's easy to bend,flared and shaped..unlike steel binubuka mo pa lang minsan ng crack na sa dulo..prone pa sa rust.
But if you are eager to replace your truck brake line with steel tubing ,dami dito nyan sa cabanatuan.along maharlika high way in front of kia motors mismo sa stop light.
Or any auto supply here they do sell that kind of tubing..kung nasa ilocos ka madadaan ka dito.
And you need flaring tools,tube cutter and tube bender para magawa mo ng maayos at madali ang pag papalit mo ng brake lines.:)
Re: 3/16" Steel Brake line
These are the tools ...
The Ridgid Double Flaring tool I already sold but the Eastwood Tubing Bender & Pliers set is still available. Check my ads if you are interested.
I reckon the job you want to pull requires good tooling as it involves some safety issues.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: 3/16" Steel Brake line
i think i need to invest first on the double flaring tool or the adapters since i already have a flaring tool and tubing cutter. pero baka pwede mo ibenta separately yung forming pliers mo sir jay.:p. kasi may tubing bender nako i bought for less than P1k (a brand less made in japan)around a year ago. the reason why yung pliers is mas versatile siya i think on relatively tight corners under the hood. i could still be wrong though since di pa ganon kabihasa ang experience ko on bending tubes. tsaka kasi may interest ako sa isa pang klase ng pliers mo posted at sulit. hehe. plus i'm on a tight budget.:(
sir bugel, try ko dumalaw minsan sa sinasabi mo tutal i go home on some weekends sa tarlac. yung copper kasi di sya ganun ka tibay against vibrations at mas madali magcrack compared to steel. against rust for sure panalo ang copper pero i would still prefer steel durability wise.
Re: 3/16" Steel Brake line
tool haven din pala ang LYS hardware. kelangan ng maskara gaya nung sa kabayo kundi ubos pera. hehe
eto nabili ko kay LYS kanina lang...salamat kay sir JayL regarding sa info kung saan makakakuha neto.
Ridgid double flaring tool at M10 10x12 flare nut wrench
Re: 3/16" Steel Brake line
tool haven din pala ang LYS hardware. kelangan ng maskara gaya nung sa kabayo kundi ubos pera. hehe
eto nabili ko kay LYS kanina lang...salamat kay sir JayL regarding sa info kung saan makakakuha neto.
Ridgid double flaring tool at M10 10x12 flare nut wrench
Re: 3/16" Steel Brake line
tool haven din pala ang LYS hardware. kelangan ng maskara gaya nung sa kabayo kundi ubos pera. hehe
nakabili na rin ako ng double flaring tool na ridgid (model 345) at isang pirasong M10 10x12 na flare nut wrench
post ko sana pic kaso naguumapaw sa forum yung size kahit niresize ko na sa 380x270. may mali ba ako sa ginagawa ko sa pic posting?
Re: 3/16" Steel Brake line
tool haven din pala ang LYS hardware. kelangan ng maskara gaya nung sa kabayo kundi ubos pera. hehe
nakabili na rin ako ng double flaring tool na ridgid (model 345) at isang pirasong M10 10x12 na flare nut wrench
post ko sana pic kaso naguumapaw sa forum yung size kahit niresize ko na sa 380x270. may mali ba ako sa ginagawa ko sa pic posting?
Sige bro Mike post mo and we'lll try to resize it.
Congrats on your tool choice. Ridgid is top notch brand. 🙂
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: 3/16" Steel Brake line
Correct me if I am wrong but I think the usual accepted size is 640 X 280. Anyway I will check that again !!!
--------------------------------------------------------------------------------------------------------------------------
OK, correction on the size :
[COLOR="Red"]its 640 X 480
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Re: 3/16" Steel Brake line
eto sir jay, pakiedit na lang lahat kung mali man at pasensya na rin sa abala. niresize ko na rin sa 640 x 480 mga pics nato. salamat.
nakahanap na rin ako ng steel tubing. dinala ko pa magnetic tool ko just to make sure kung steel nga. some practice with the flaring tool. kelangan ko lang ng mas magandang reaming tool. di masyado halata yung double flare. cellphone lang gamit ko sa piktyur piktyur.
