Forum

Use gasket maker Wi...
 
Share:
Notifications
Clear all

Use gasket maker With VELLOMOID gaket??

13 Posts
8 Users
0 Reactions
186 Views
 PatT
(@patt)
Posts: 13
Active Member
Topic starter
 

Hello ALL!
I`m changing the oil seal of the output shaft of the transfer case of my old jeep TOM. I`m using cardboard thin VELLUMOID gaskets (that i made at home) to close up and seal everything afterwards.

Is it a good idea to put 3bond or a similar gasket maker on the mating surfaces in addition to the vellumoid gaket to insure a better leak free seal? I`m avoiding having to re-do everything just cause there`s a leak!

THANK YOU 🙂
Patrick

 
Posted : 24/05/2009 8:20 pm
(@twisted)
Posts: 103
Estimable Member
 

Re: Use gasket maker With VELLOMOID gaket??

hi, sorry but what material is vellomoid? is it metal or asbestos?

 
Posted : 05/06/2009 7:54 am
(@shampooking)
Posts: 17
Active Member
 

Re: Use gasket maker With VELLOMOID gaket??

vellumoid is a brand name of gasket paper

 
Posted : 04/01/2011 5:19 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Use gasket maker With VELLOMOID gaket??

We used this with good success. What's ok about it is it does not dry up too quickly and gives ample time for application and then positioning of the parts before it starts to harden.

BTW I sometimes wire wheel brush parts surfaces for preparation before applying the stuff.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 04/01/2011 6:06 pm
jarod
(@jarod)
Posts: 1222
Noble Member
 

Re: Use gasket maker With VELLOMOID gaket??

Jay, Is the RTV Silicone Gasket Maker just the same as the "Silicone sealant" used for valve covers?

For more of the latest tools, deals and tips - click HERE

 
Posted : 04/01/2011 6:33 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Use gasket maker With VELLOMOID gaket??

Jay, Is the RTV Silicone Gasket Maker just the same as the "Silicone sealant" used for valve covers?

Which brand? Lots of Silicone RTV sealants. For High Temp use , for Windshield, as Gasket Makers etc.... best to read instructions on the back of the product carefully to make sure it's for the right application.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 04/01/2011 6:55 pm
jarod
(@jarod)
Posts: 1222
Noble Member
 

Re: Use gasket maker With VELLOMOID gaket??

I see, so the term "gasket maker" is a generic term used for many applications. Thanks Jay!

For more of the latest tools, deals and tips - click HERE

 
Posted : 04/01/2011 11:56 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: Use gasket maker With VELLOMOID gaket??

I see, so the term "gasket maker" is a generic term used for many applications. Thanks Jay!

but I do like the name, sounds like a cure for hemorrhoi...


click my signature and it will take you there........

 
Posted : 05/01/2011 12:07 am
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Use gasket maker With VELLOMOID gaket??

but I do like the name, sounds like a cure for hemorrhoi...

LOL hahahhahaha 🙂

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 27/01/2011 11:06 pm
clayfigur
(@clayfigur)
Posts: 126
Estimable Member
 

Re: Use gasket maker With VELLOMOID gaket??

@ jay, where do you source a thicker vellamoid. I need 3mm for my bike. I upgraded the piston, it kinda raised everything up. I needed to raise the block to proportion. Right now I'm using multiple vellamoids it kinda work but I'm afraid it would leak out the water in due time.

 
Posted : 10/02/2011 8:24 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Use gasket maker With VELLOMOID gaket??

@ jay, where do you source a thicker vellamoid. I need 3mm for my bike. I upgraded the piston, it kinda raised everything up. I needed to raise the block to proportion. Right now I'm using multiple vellamoids it kinda work but I'm afraid it would leak out the water in due time.

Gasket sheet materials I just buy from auto shops then make custom fitting gaskets. Here in Pasay there are a lot of lined up auto shops on both sides of Taft Ave nearing Pasay Rotunda in Edsa.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 10/02/2011 11:22 pm
clayfigur
(@clayfigur)
Posts: 126
Estimable Member
 

Re: Use gasket maker With VELLOMOID gaket??

Gasket sheet materials I just buy from auto shops then make custom fitting gaskets. Here in Pasay there are a lot of lined up auto shops on both sides of Taft Ave nearing Pasay Rotunda in Edsa.

Thanks, I've seen those.. I'd stop by.. I'm going to Polymer today.. need to buy fiberglass..

 
Posted : 11/02/2011 11:22 am
(@booghaw)
Posts: 5
Active Member
 

Re: Use gasket maker With VELLOMOID gaket??

Which brand? Lots of Silicone RTV sealants. For High Temp use , for Windshield, as Gasket Makers etc.... best to read instructions on the back of the product carefully to make sure it's for the right application.

what brand can you recommend for car engines? my mechanic usually tells me to buy the Pioneer brand black silicone gasket maker & that's what he uses on the engine top cover & on the oil pan.

 
Posted : 12/05/2011 1:30 pm
Share: