After changing the Tbelt, water pump, seals, before xmas (sorry di ako nakapagpicture, ako lang kasi mag isa gumawa) I decided to go further para me bonding kami ni mrs at ng kid namin the rest of the holidays..
Scope of work: cleaning of intake manifold, TB, checkng of wirings and remanufacture the rack and pinion and power steering . (Please do not expect instructional pointers like what sir miked did in his recent DIY presentation)
Re: Yearend Car Maintenance DIY Family Bonding
thereafter, the division of labor hehehehe
my kid: Open the harness so that I can inspect the integrity of the wires considering the age of this car (13 years).. CRV gen 1
Re: Yearend Car Maintenance DIY Family Bonding
My wife: clean PS pump and hoses, TB (using carb cleaner and brake cleaner plus compressed air)
Re: Yearend Car Maintenance DIY Family Bonding
My kid: after opening the harness, he was tasked in the cleaning of Intake Manifold.. (with the help of his cousin albeit pwersahan)
Re: Yearend Car Maintenance DIY Family Bonding
Meanwhile nasa ilalim ako ng car, nagbabaklas ng P/S gearbox.. sorry ala pixs ..
eto nalang, yung likod ng oto para di ako kita...hehehe
Re: Yearend Car Maintenance DIY Family Bonding
Finally, nabaklas ko na din ....
while doing the gearbox overhaul, and waiting for other parts to arrive (my daughter from manila), itinayo ko yung steering rack as a first way to check kung me leak ang end seal..
Inipit ko nalang muna sya sa grip wala pa kasi ako bearing separator (di ko pa napapasyalan yung brod natin taga pasy hehehe) which is recommended to be used in this situation..
Re: Yearend Car Maintenance DIY Family Bonding
as you can see in the picture, meron tumagas nung pagabi na kaya its an indication na need na rin i overhaul..
BTW, kung hindi siya nag leak, another method i used to determine kung me problem na yung end seal by engine washer using atf. bubugahan yung papasok ng side fittings at pagagalawin yung shaft.. ingat lang sa pressure, dapat mahina lang baka sa sobrang lakas bumaligtad yung although hindi pa nangyayari sa experience ko yung ganon kahit minsan napapalakas yung pressure gamit ko..
Re: Yearend Car Maintenance DIY Family Bonding
prior to the above post, I was able to continue the cleaning of TB since its plate needs to be removed..
after matanggal yung plate.. prep for reassembly using nitrile o-rings..
Re: Yearend Car Maintenance DIY Family Bonding
I forgot, before I assembled the TB, my wife did the cleaning of IACV and FITV (that one under the TB) using brake cleaners, joy and running water..
Re: Yearend Car Maintenance DIY Family Bonding
It took us two days in doing all the above tasks..
Unfortunately, nabuhusan ako ng atf sa paa but i did not bother about it not knowing na meron pala ako maliit sugat.. Kinagabihan, namaga paa ko and then two days na baldado....
As of today, yung power steering nalang di pa nakakabit, medyo naging busy sa paper work s. I'll try to update this thread kapag iaasemble ko na, less my kids nasa manila na kasi sila. hehehe
Re: Yearend Car Maintenance DIY Family Bonding
WOW ! So nice to see everyone were pinching in and having interest in the car maintenance project. I hope everyone will cherish this bonding moments, kasama lahat, from SWMBO up to the kids. You are a lucky man bro phezthie, congratulations !!!
:2thumbsup: :clap: :congratualtions: :groupwave:
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Re: Yearend Car Maintenance DIY Family Bonding
Many thanks bro rosy. :thanks:
yeah you're right tokayo, very supportive sakin ang CIC ko. Kung ano ang hobby ko, hobby din nya. sya lang katulong ko kahit mag ooverhaul kami ng oto. pag yung single piston pang bukid namin, siya na gumagawa hehehe..
Actually even during my electronics days, lahat talaga kami magkakasama gunmagawa pati mga kids namin, automatic ang division of labor... kaya lang I must admit na di naman pwede lagi sa tabi ko lang sila 🙁
anyways, regards and cheers bro.. 🙂
Re: Yearend Car Maintenance DIY Family Bonding
Bro ... good thread ... Teamwork.
You mean the ATF entered the wound and caused havoc. I have not experienced this yet but we do need to take this seriously. I for one work with ATF from time to time and had never paid attention on small arm cuts ( galos ) getting in contact with the fluid. Maybe just got lucky there was no contact.
Hope you're fine now.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Yearend Car Maintenance DIY Family Bonding
Im fine now sir JayL, thanks..
Actually that's what I been thinking too. i been doing this thing and frequently using ATF in the past but haven't experienced it before. Maybe, it was just a mere coincidence or probably it had simply aggravated my wound already going bad ...
i hope i can visit your place soonest...
regards bro
Re: Yearend Car Maintenance DIY Family Bonding
Nice family bonding... 🙂
Sent from my GT-N7100 using Tapatalk
