Forum

How to remove Elect...
 
Share:
Notifications
Clear all

How to remove Electric fan Motor Bearing retainer?

6 Posts
3 Users
0 Reactions
52 Views
 PatT
(@patt)
Posts: 13
Active Member
Topic starter
 

Hi Everyone!
Here i am again trying my hand at electric fan repair. This is an Imarflex brand fan. So, i`d like to replace the 2 bearings (more like metal bushings) supporting the front and rear end of the motor shaft (which i just replaced btw).

I wrongly got a tube and tapped the bearing from the outside of the motor housing hoping to push out the bearing retainer "fingers" with the bearing itself. The bearing just popped out leaving the retainer "fingers" in there.

So, my question is: How do i get the Bearing retainer "fingers" out, and how do i return it? It looks like a press fit, i dont really know.. Any help appreciated! THANK YOU!
patrick

 
Posted : 09/05/2010 3:34 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: How to remove Electric fan Motor Bearing retainer?

try posting pictures so we can help you better...


click my signature and it will take you there........

 
Posted : 09/05/2010 3:56 pm
 PatT
(@patt)
Posts: 13
Active Member
Topic starter
 

Re: How to remove Electric fan Motor Bearing retainer?

Thanks, so may i know how to post pictures on this forum?

 
Posted : 09/05/2010 7:50 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: How to remove Electric fan Motor Bearing retainer?

open a free account and upload your pictures in photobucket. from ther choose the image link and copy the link. paste it in the reply post in any site like this one...


click my signature and it will take you there........

 
Posted : 09/05/2010 11:30 pm
 PatT
(@patt)
Posts: 13
Active Member
Topic starter
 

Re: How to remove Electric fan Motor Bearing retainer?

Oh ok, thanks!

 
Posted : 11/05/2010 8:34 pm
jaymz
(@jaymz)
Posts: 8
Active Member
 

Re: How to remove Electric fan Motor Bearing retainer?

So, my question is: How do i get the Bearing retainer "fingers" out, and how do i return it? It looks like a press fit, i dont really know.. Any help appreciated! THANK YOU!
patrick

hi patrick!
that bearing retainer is spring material... and it is machine press-fitted to the motor housing. if ever you can get it out of its attachment, you may not seat it back properly. it may not hold the bushings properly again.
best to do is buy the whole assembly/set of the motor housings with bushings.

HTH

 
Posted : 05/04/2011 11:35 am
Share: