Forum

Share:
Notifications
Clear all

acrylic panel hanging on the wall

5 Posts
2 Users
0 Reactions
41 Views
(@rpga4433)
Posts: 163
Estimable Member
Topic starter
 

just like to ask ok na ba ito plan ko.

inaalala ko yung bolt on the wall kun kakayanin kaya.

im using drop in anchor then screw it.

ito yung drop in anchor

this is the plan

this panel weight in 60-70 kilo and will be hold by spider system. then hang on the wall using 10mm drop in anchor and bolted by 8mm screw. all stainless 304.

kaya ba gn 8 lang gamitin ko pang hang sa wall?

 
Posted : 30/04/2014 10:14 pm
(@rpga4433)
Posts: 163
Estimable Member
Topic starter
 

Re: acrylic panel hanging on the wall

ito yung spider system solid stainless ito.

 
Posted : 30/04/2014 10:16 pm
(@bryant77)
Posts: 480
Reputable Member
 

Re: acrylic panel hanging on the wall

Kaya yan ng spider fittings. Kailangan maganda yun kapit ng grip anchor sa wall. Common installation ng spider fittings are bolted on steel beams.Have you check kung same tread yun grip anchor and bolt ng spider fitting?

Based on my experience some hollow blocks "ampaw" yun loob. When you inserted the grip anchor and hammer the setting tool pumapasok paloob yun grip anchor. The best gamitin ang grip anchor sa poured concrete like slab, beams and columns.

Yun fischer brand marami silang fastening products. Pili ka lang what based on your requirement. Medyo mahal ng konti pero sulit. I'm using their products in hanging glass signage on drywall partitions.

http://www.fischer.de/en/Home/Product-Range.aspx

 
Posted : 01/05/2014 8:14 pm
(@bryant77)
Posts: 480
Reputable Member
 

Re: acrylic panel hanging on the wall

For advertising purposes ba yun acrylic panel?

For similar purposes we're using stainless steel advertising bolt to hang glass signage on wall. Then yun advertising bolt naka screw and tox lang sa wall. But I'm using fischer brand na tox.

If you have 70 kg panel divided by 8 bolt or screw. Each bolt will carry around 8.75 kg only if equally distributed yun load.

 
Posted : 01/05/2014 8:28 pm
(@rpga4433)
Posts: 163
Estimable Member
Topic starter
 

Re: acrylic panel hanging on the wall

finally found this type of expansion bolt. almost perfect i was looking for satainless one. hope any one know where to get a stainless version. i got it surprisingly from to-suy really need a eye to look for it.. hirap umasa sa mga sales lady nila.

i think this is called M8 or FB m8 Expansion bolt

yes bry you are right.. dont use drop in expansion bolt on wall. Thankfully you are there.. (^_^)

 
Posted : 01/05/2014 8:33 pm
Share: