Forum

Share:
Notifications
Clear all

church's door project...need your help in building.

164 Posts
18 Users
0 Reactions
1,095 Views
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: church's door project...need your help in building.

rosy,
thanks very much !!!
grabe, nagulumihanan ako sa dami ng links na binigay mo...
at may canopy pa...thanks talaga !!!

and yes maganda nga yung arch top that master timber says.
very simple and elegant...
about the judas door, oo nga baka mahirap din gawin...

hindi naman siguro magtatagal eh gagawin din ang canopy,
kaya no worry naman dun sa door being exposed to the elements.

timber & jarod,
thanks din sa mga shares of ideas...
maganda nga yung arch top.
but the question is kaya ko kayang gawin yun ( DIY ) ?
takot pa naman ako sa wood bending.

i have made a rough sketch of the door...
ginawa ko lang to kanina,
pasensya na, hindi pa ako marunong ng sketch ups.

in between doors and the concrete are spaces, ( wala pa naisip na design )
i've indicated the size of the entrance,
just to give the ideas of how big the door..
will it be full size door for the whole entrance'
or standard size door, sorrounded by wood frames

now is , how will i incorporate an arch top?
considering may concrete beams na on the top...
baka umigsi na yung doors or bumaba ang effect nung arch ?

ang gaganda ng designs...:hippie3:

:thanks::thanks:

 
Posted : 21/02/2012 1:46 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: church's door project...need your help in building.

no bending there Jon, as for the arc, you might get away with an arc starting at 2.2 meters that is more than 6 feet already... yung hamba or frame can be done in pieces then shaped to the desired arc... kaya mo yan brader... remember who it is for...


click my signature and it will take you there........

 
Posted : 21/02/2012 2:15 pm
rosy
 rosy
(@rosy)
Posts: 4307
Member
 

Re: church's door project...need your help in building.

Bro jon, go back to the link I gave you regarding the door designs and try to study the designs where the wood panels or planks were constructed vertically and also look at row no.6 and study the photo no.2, click it to enlarge, now does it have an outside main frame ? diba wala !

All the panelings side by side were just bolted on an inside frames that will give support to the whole door, that design will give you an idea on how to solve the archings of the top of the door.

Just try to be imaginative and be innovative in the approach, arching a main frame might be somewhat difficult unless you have the neccessary and right equipment for doing so on a very thick wood. May I suggest too that you visit some sash factory or those guys that really make doors commercially and try to find out their equipments, what they use for arching and others, at least you will know what other tools you will be needing. :rolleyes: :p

CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw

 
Posted : 21/02/2012 3:26 pm
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: church's door project...need your help in building.

no bending there Jon, as for the arc, you might get away with an arc starting at 2.2 meters that is more than 6 feet already... yung hamba or frame can be done in pieces then shaped to the desired arc... kaya mo yan brader... remember who it is for...

hindi pa ako naguumpisa, pinagpapawisan na ako !:wah::swt:

 
Posted : 21/02/2012 3:26 pm
(@willyfernando)
Posts: 799
Prominent Member
 

Re: church's door project...need your help in building.

hindi pa ako naguumpisa, pinagpapawisan na ako !:wah::swt:

Brader PM sent.

 
Posted : 22/02/2012 2:22 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: church's door project...need your help in building.

Brader PM sent.

pm replied...

 
Posted : 22/02/2012 6:25 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: church's door project...need your help in building.

i'll be visiting willyfernando's place tomorrow, hopefully in the afternoon...
just dropping by,and just to orient myself to the place...

yung gusto mag eb sa place ni willyfernando, don't worry coz this wont be the last time i'll gonna be visitng his place...
marami pa itong kasunod.

sir willyfernando, if you dont mind, please PM me again the exact address and landmarks of your place...
hope to see you sir tomorrow...

 
Posted : 19/03/2012 11:13 pm
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: church's door project...need your help in building.

got a chance to visit willyfernando's woodshop today.
and it's a trip worth trying again.
unfortunately, i haven't met sir willyfernando in the flesh,
coz he had a meeting to attend.
but fortunately enough, i have talk with the guy named apol...
a furniture and cabinet expert.
he's very accomodating
he guide us ( swmbo ) to the every corner of willyfernando's woodshop.
sayang of all the important thing that i must forget,
bakit nakalimutan kong dalin yung camera ko ( asking permission, is it ok to take pics ? )
he show all those bulky bandsaws ( with 1" blade, i think ), tablsesaw, jointer, planer, etc, etc

but what really caught our attention were the african iroko hardwood.
such a gorgeous wood !!!
even the swmbo was really amazed by the beauty of the wood.
yan tuloy, dahil dyan,
nabigyan na tuloy ako ng panibagong projects made of african iroko hardwood.:sampay:
actually i have now imagined my next projects made by the iroko hardwood.
he even showed me sir balarila's kiln dried "kamagong".

i believe this church door project will go on smoothly,
excited na tuloy ako na makatikim ng iroko sawdust.
hope this weekend i'll be able to visit again sir willyfernando's woodshop
and start the church door project.
and in God's time all will be done...

thank you sir willyfernando for the very detailed and accurate route instruction,
malabo kang maligaw sa instruction.
actually we've only talked to the phone, not personally.
thanks apol for the time you spent and nice talking to you.

:thanks: and God bless you always !!!

 
Posted : 20/03/2012 10:54 pm
(@balarila)
Posts: 1368
Noble Member
 

Re: church's door project...need your help in building.

he even showed me sir balarila's kiln dried "kamagong".

Shhhh! Hindi alam ni SWMBO na bumili na naman ako ng kahoy!

 
Posted : 20/03/2012 11:00 pm
(@willyfernando)
Posts: 799
Prominent Member
 

Re: church's door project...need your help in building.

Shhhh! Hindi alam ni SWMBO na bumili na naman ako ng kahoy!

@Ding
OOPSIE!!!:rolleyes::D:gotcha:

@Jon,

Anytime Brader, I am excited to do this Church door build as well. Thank you for the kind words about my IROKO and what you have seen in my shop. It's (shop) not much but we get to work on beautiful projects just the same.

 
Posted : 21/03/2012 5:16 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: church's door project...need your help in building.

Shhhh! Hindi alam ni SWMBO na bumili na naman ako ng kahoy!

ooooppphhhhssss!!!!!:smshocked::smshocked:

 
Posted : 21/03/2012 7:25 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: church's door project...need your help in building.

good day to alll !!!
it's been a while, and i thought this project will never push through. i was given an "ultimatum" or should i say deadline by the church's board chairman, that i have till end of may to start this project or we let others to push through with this project...inip na inip na daw kasi sila kakahintay sa pintuan ng langit ( as ryobi says )...i also ask help to some phm and cab members. i was almost to give up and let others finish this project.
then come may 30 ( that is end of may ) and sir willyfernando send me a private message, and asking me when are we going to start the project...
God really works wonders to everybody and everything, everything has it's purpose and God intervene on everything no matter what.
so here we go again, tama na ang kwentong pagkahaba haba, umpisahan na ang trabaho...

it is last saturday and it is a scheduled trip to willyF workshop, and first day to start the project.

 
Posted : 03/07/2012 6:50 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: church's door project...need your help in building.

will continue the story later...downloading pics pa pala....:cheerleader: ....:D:D

 
Posted : 03/07/2012 7:42 am
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: church's door project...need your help in building.

Subscribed.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 03/07/2012 3:03 pm
(@bryant77)
Posts: 480
Reputable Member
 

Re: church's door project...need your help in building.

Jonathan PM mo ko pag punta ka ulit sa workshop ni willy.

Sama ako... hehehe

 
Posted : 03/07/2012 8:48 pm
Page 2 / 11
Share: