Re: church's door project...need your help in building.
Nice WIP bro Jon! It's nice to see people doing charity work for love.
Re: church's door project...need your help in building.
Wow bro jon, nag umpisa ka na pala sa door paneling mo ah. Anyway I'll be there sa shop ni bro WillyF before lunch time again to give you some hand or moral support.
See you there again like last Saturday !!!
sorry bro rosy, hindi natuloy yung build ko ngayon sa shop ni sir willyF...
busy on the frame installation, and we encounter minor problems, like there was no clearance for the top frame...kung pupunta pa ako after lunch, konti lang magagawa natin...
gusto ko kasi masulit yung araw ng pagtulong mo sa church door build...:hammer:
thanks very much brad !!!
Re: church's door project...need your help in building.
Nice WIP bro Jon! It's nice to see people doing charity work for love.
amen brad jarod....
Re: church's door project...need your help in building.
last thursday , i manage to start the main door.
and then feed the jointed to the ts...
Grabe talaga ang table saw ni bro WillyF, pang INDUSTRIAL GRADE and the rest of his machineries, from his BAND SAWS, to JOINTER/THICNESSER, to RADIAL ARM SAW, to his " KALABAW ", very nice and interesting story behind it bro WillyF, hindi ko na kilala o matandaan yung ibang machineries sa wood shop and true to the words na really " ALL MUSCLED UP "
Oh I almost forgot his very huge wood oven ( KILN DRYER ) !
Bro Jon, hindi tayo nag kamali sa hiningan ng tulong at support.
To bro WillyF and his master woodworkers, we thank you and salute you for your kindness, you made Jon's very huge project come to reality. :clap1: :2thumbsup:
MARAMING SALAMAT PO !!!!!!!!!!!! :thanks:
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Re: church's door project...need your help in building.
this is last night's wip...
putting reinforcement to the sides of the doorframe...
installing the angle bars...finished...
nail added and all are ready for installation...
Pardon my ignorance, what are the nails in the angle bars for?
Dumb mistakes will always be dumb mistakes, unless . . . . you learn from it, and then it will be learning experience.
Re: church's door project...need your help in building.
Pardon my ignorance, what are the nails in the angle bars for?
added re-inforcement, reduce or avoid lateral movement.
Re: church's door project...need your help in building.
Bro Jon, hindi tayo nag kamali sa hiningan ng tulong at support.
To bro WillyF and his master woodworkers, we thank you and salute you for your kindness, you made Jon's very huge project come to reality. :clap1: :2thumbsup:
tama ka bro rosy...all the power tools here in the shop are all muscled, hindi ka bibitinin.
sa dami ba naman ng woods ni mini-mill dito, what you need are really powerful tools.
at sa dami ng pagsubok na dinaanan, i'm very greatful for the kindness of sir willyF, and master woodworker apol.
Re: church's door project...need your help in building.
update of the project.
the frame already installed ...
Re: church's door project...need your help in building.
tama ka bro rosy...all the power tools here in the shop are all muscled, hindi ka bibitinin.
sa dami ba naman ng woods ni mini-mill dito, what you need are really powerful tools.at sa dami ng pagsubok na dinaanan, i'm very greatful for the kindness of sir willyF, and master woodworker apol.
@Rosy and Jonathan,
Anytime mga Bros basta para kay Lord at sa inyo. 🙂
Re: church's door project...need your help in building.
update of the project.
the frame already installed ...
Ang ganda bro! I happened to pass by last Sunday.
It's big and beautiful. When ba install ang doors?
Re: church's door project...need your help in building.
Ang ganda bro! I happened to pass by last Sunday.
It's big and beautiful. When ba install ang doors?
totoo classmate willy, nakakalula yung size ng frame...
matatagalan pa ang doors, coz i'll be the one building it ( of course with the supervision of the master woodworker apol )
stop muna for the meantime yung build, tinamaan ako ng flu, can hardly walk.
:thanks:
Re: church's door project...need your help in building.
Ako din, just recovered from a bout with flu.
Sobrang sipag mo kasi.
Pagaling ka agad classmate!
Bigat pa naman ng doors na gagawin mo.
Re: church's door project...need your help in building.
updating my door build project...
door jamb and the frame and panel are all finished and installed, side walls as well as the top are all plastered and glass blocks are added...
waiting for the main door to be finished.
Re: church's door project...need your help in building.
it's time for the construction of the main door...
prepared and milled the stock for the main door frame...
layout and marked the mortise...
and set up the mortiser...
this mortiser are easy to use...
ones the stock is fixed, you just crank the lever to move it sideways and another one to move it forward and backward, to suit the size of your mortise.
Re: church's door project...need your help in building.
the mortiser in action.
bore the first hole first...
move it sideways...
then forward to enlarge the mortise width...
and we have the mortise...