Re: church's door project...need your help in building.

Time to get ready with the shaper.... Woohooo.....

Re: church's door project...need your help in building.

finished with the tenoning...and now we have the frame...

not just one, but two frames...

Hey bro jon,

Will these frames still need to be sanded to a fine finish ? Maybe I could be there sa shop this Sat( hoping to be free that day ) to assist you and start sanding the surface, pwede kong dalhin yung finishing sander ko rin, dalhin mo rin yung Skil sander mo para may backup tayo !!

Bye and TY :p

Re: church's door project...need your help in building.

Hey bro jon,

Will these frames still need to be sanded to a fine finish ? Maybe I could be there sa shop this Sat( hoping to be free that day ) to assist you and start sanding the surface, pwede kong dalhin yung finishing sander ko rin, dalhin mo rin yung Skil sander mo para may backup tayo !!

Bye and TY :p

yes, brad rosy, they need to be sanded, but not yet, till all the whole door components are finished and glued.
many things to do pa, like the panels, inside rails and stiles...

thanks to you too !

Re: church's door project...need your help in building.

getting ready for the center stiles or mullion...

marked and checked for squarness...

start with the motises...

to be continued again...

Re: church's door project...need your help in building.

Time to get ready with the shaper.... Woohooo.....

no need for a shaper, since the design is of simple straight lines...
though sir willyfernando's shop has several shaper's in his arsenal...

Re: church's door project...need your help in building.

completing the tenons of the middle stiles...

after completing and test fitting the mullion or the mid stiles'
the doors are already showing huge progress...

the project are giving us some ideas of how will be the outcome of the door design.

the door is almost finished,
putting a simple panel in between the stiles will do the job right away.

nakakawala ng pagod ang outcome ng projects na ito...
although not yet finished, but with the outcome, you can feel that the finish product are within arms reach...

excitement is in the air...
i can't wait for the final results...:cheerleader:

Re: church's door project...need your help in building.

Bro Jon dalawa ba yan doors na yan? .... grabe la laki siguro ng bisagra needed niyan.

The wood really looks great.

Thanks for posting. It's so nice to see a commercial wood shop in action. Iba setup kesa DIY. Lahat ng power tools malalaki hahhahhah.

Yeah within arms reach na project mo ... go go go.

Re: church's door project...need your help in building.

Bro Jon, I'm kinda excited too to see that door to be completely assembled so maybe we could start sanding the surface !!!!

OOHHHHWEEEEEEEEEEEE :p 😀 🙂 malapit ng mabuo !!!!!!!!!!!!!!!!!! LOL

Re: church's door project...need your help in building.

Bro Jon dalawa ba yan doors na yan? .... grabe la laki siguro ng bisagra needed niyan.

The wood really looks great.

Thanks for posting. It's so nice to see a commercial wood shop in action. Iba setup kesa DIY. Lahat ng power tools malalaki hahhahhah.

Yeah within arms reach na project mo ... go go go.

yes brad jayL, dalawa itong doors , almost the size of a 4 x 8 sheetgoods each door.
and heavy duty hinges are the ones recommended by sir willyF.

that's true the power tools here are all muscled up, puede mong gamitin ng walang hintuan,
ako ang sumusuko...:surrender:

thanks brad...

Re: church's door project...need your help in building.

Bro Jon, I'm kinda excited too to see that door to be completely assembled so maybe we could start sanding the surface !!!!

OOHHHHWEEEEEEEEEEEE :p 😀 🙂 malapit ng mabuo !!!!!!!!!!!!!!!!!! LOL

ha ha ha!!!
excited ka na bro rosy...
yap, malapit na tayong magliha...:soccer:

me too, i'm very very excited...

Re: church's door project...need your help in building.

malapit na nga jon! mababangis nga tools ni brader willyF..pang industrial eh! kaw talaga susuko sa mga yan...24/7 365 days a year siguro ubra tumakbo mga yan...hehe

solid wood panel din ba ilalalgay mo in between mullions? ok na yun kasi me glass blocks naman sa itaas ng jamb.

ganda na...ganda din ng wood..gaano kaya kabigat mga iroko na yan?

hope we can join in the fun...

cant wait for the doors to be installed.

V

Re: church's door project...need your help in building.

malapit na nga jon! mababangis nga tools ni brader willyF..pang industrial eh! kaw talaga susuko sa mga yan...24/7 365 days a year siguro ubra tumakbo mga yan...hehe

solid wood panel din ba ilalalgay mo in between mullions? ok na yun kasi me glass blocks naman sa itaas ng jamb.

ganda na...ganda din ng wood..gaano kaya kabigat mga iroko na yan?

hope we can join in the fun...

cant wait for the doors to be installed.

V

the initial plans are multiple solidwood panels and rails in between the mullion.

and yes bongang sobrang ang gaganda ng iroko hardwood na ito at sobrang bigat...
there are times nga na sumakit ang katawan ko kinabukasan,
dahil sa pagbubuhat-buhat lipat- lipat ng iroko ... ( ssssshhhh hindi alam ni willyf to ):secret:

yes sana maka join ka sa fun...and visit also sir willyF's shop and see for yourself the beauty of the iroko.
at hindi lang iroko ang kahoy nya...
meron dussi ( don't know the spelling or the exact name ) , walnut, maple, and some local yakal, narra etc...
as you can see, seldom or almost impossible that you see a good wood out in the market.
and i already told sir willyF na bibili ako ulit ng iroko after this door project.

me too, can't wait for the door installations...

Re: church's door project...need your help in building.

the initial plans are multiple solidwood panels and rails in between the mullion.

and yes bongang sobrang ang gaganda ng iroko hardwood na ito at sobrang bigat...
there are times nga na sumakit ang katawan ko kinabukasan,
dahil sa pagbubuhat-buhat lipat- lipat ng iroko ... ( ssssshhhh hindi alam ni willyf to ):secret:

Not really surprised on account of IROKO's Average dry weight is about 42 lbs/ft3 (675 kg/m3).:D Here's a link to get a short info on IROKO.. http://www.wood-database.com/lumber-identification/hardwoods/iroko/ :glassesf:

Re: church's door project...need your help in building.

time to make some grooves...

marked...

multiple pass on the ts, fliping over then adjusting the fence on the next pass...

Re: church's door project...need your help in building.

cleaning the grooves with the use of a chisel...

chisel making good use as a scraper, to flatten the grooves.