I want to share this my DIY floor tiles I thought I’ve lost this pic. From my hard drive…
Replacing new tiles and salvaging the old tiles the reason why I should replace my old tiles because my house has been renovate last 2008 and need more additional tiles because some part of the house has been extended . I’ve try to looking to the market but it is no longer available its almost 8 years ago the day I purchase so need to buy a new one….
here is my previous floor tiles 50 x 50 cm
I started last jan. 2010 to replace new tiles first is salvaging the old tiles sayang naman kung babasagin ko lahat and throw it away…. try to salvage the tiles buy cutting the tiles grout using angle grinder with water just to prevent spreading the dust . After the grout has been cut and then I used my ozito demolition hammer drill put the tip of the chisel to the edged of tiles and then hammer it and you will heard a high pitch sound of the tiles. it means that the tiles has been pop up it was so easy to remove it because the adhesive that they used by a contractor is just a cement and fine sand I have no idea about real tiles adhesive like ABC cement I’m just follow to the contractor for what material they will be used. never heard or recommended for tiles adhesive like ABC cement.
Re: DIY granite floor tiles
80% of tiles have been save but some are totally damage or crack ….I will use this to my rooftop Comfort room
here is my replacement tiles 60 x 60 cm P 299.00 pesos each 120 pcs. needed for 50 square meter floor
Re: DIY granite floor tiles
And then apply with bofix ABC cement adhesive tiles. sorry no pic during I installed a floor tiles . Spreads the bofix at the floor with the use of a Notch trowel teeth of ½ and then apply also at the back of tiles and then place it and use rubber hammer the tiles just to spread and compress the tile adhesive and level . The distance between the tiles is the thick of NT cutter blade
Re: DIY granite floor tiles
kaw pala tong grabe ang level bro !!!
all around ka na talaga...:hammer:
karpentero, steelman, welder, latero, mason, foreman, labor, pahinante, :mop:
ahhh lahat nasa iyo na !!!!
:sailor:
Re: DIY granite floor tiles
Since I have a work at the factory 5 tiles installed and then the next day is 15 tiles salvaging and on my day off 15 tiles plus salvaging the old tiles .it done before or after my work in the factory . almost 1 ½ months ko natapos itong pag ta tiles so nice na nagawa ko ito without any helper plus sermon ng kumander hehehe but she proud of me nagawa ko din weeee and very good result flatness between the tiles and planarity are okey
Re: DIY granite floor tiles
kaw pala tong grabe ang level bro !!!
all around ka na talaga...
karpentero, steelman, welder, latero, mason, foreman, labor, pahinante,
ahhh lahat nasa iyo na !!!!
:sailor:
di naman jonathan experience lang hehehe lakasan lang ng loob :wootrock:
thanks jonathan
here is before and after
Re: DIY granite floor tiles
After is definitely a lot lot better. Even the choice of color is perfect for me.:chopper:
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: DIY granite floor tiles
After is definitely a lot lot better. Even the choice of color is perfect for me.:chopper:
hahaha thanks jay ..... may excess ako harddisk sa dati kong PC na nasira na akala ko sira na itong hard disk buti na lang at buo pa at eto nga nakuha ko din ung ibang picture na pinaggagawa ko noon for document hehehe kaduktong ito sa Built in kitchen cabinet ko up to now continue my work at my kitchen cabinet
Re: DIY granite floor tiles
very nice work brader, next month wag ka mag schedule ha, pagawa ko bahay namin 🙂 seriously, your work has always been top notch and something to be proud of. keep it coming...
click my signature and it will take you there........
Re: DIY granite floor tiles
sir anung klasing granite ba ang ginamit mo
