This thread will be dedicated for glass, hardware, fittings, consumables & glazing works...
:D:D:D
Re: Glass & Glazing Works
Let me start.
Metal/Glass Adhesive. You need a UV light to cure the adhesive.
Sample application of this adhesive is when I attached the top glass to the slanted stainless steel post of this reception table.
Re: Glass & Glazing Works
Glass to Wall - Single Point Fitting
for Glass 10mm - 12mm thick.
Disassembled parts
Fix to wall using Fischer wall plug (SX-10) and MS Round Head Screw #14 x 2 1/2". Left part of the picture. Beside is the assembled single point fitting
Actual application on glass railing to be posted soon.
Re: Glass & Glazing Works
Sir, post ka naman ng shower enclosure with door. yung parang partition lang between shower and water closet. kailangan ba tempered glass? yung hardware nya ok na ba sa t.alonzo or tomas mapua?
Re: Glass & Glazing Works
ayos itong thread na ito bro!
btw i love the fischer wall plugs! you get what you paid for...
subscribed!
V
The devil will find work for idle hands to do.-Morrissey
Re: Glass & Glazing Works
Sir, post ka naman ng shower enclosure with door. yung parang partition lang between shower and water closet. kailangan ba tempered glass? yung hardware nya ok na ba sa t.alonzo or tomas mapua?
If the shower enclosure is frameless minimum thickness of glass is 3/8" (10mm) and need to be tempered. Yun mga hardware/fitting are available sa mga glass & aluminum supplier marami dyan sa may CM Recto.
Re: Glass & Glazing Works
If the shower enclosure is frameless minimum thickness of glass is 3/8" (10mm) and need to be tempered. Yun mga hardware/fitting are available sa mga glass & aluminum supplier marami dyan sa may CM Recto.
Sir, minimum thickness is 3/8" tempered glass? may mairerecommend ba kayong glass supplier? i-DIY ko lang ito sayang labor kasi. :D:D
ganitong set-up kasi gagawin ko.
sa kabilang side nga lang yung door.
Dimension is 1800mm (H) x 1250mm (W)
Re: Glass & Glazing Works
Sir, minimum thickness is 3/8" tempered glass? may mairerecommend ba kayong glass supplier? i-DIY ko lang ito sayang labor kasi. :D:D
ganitong set-up kasi gagawin ko.
sa kabilang side nga lang yung door.Dimension is 1800mm (H) x 1250mm (W)
You need the ff:
Wall - Glass Hinges
Glass Clamp
Reinforcement fittings
Tempered Glass
Handle
Sample of fittings
Tools required:
Hammer Drill with 6mm & 8mm masonry bit
Allen Wrench
Vacuum Sucker - pang lift ng glass
You will need some assistance pag mag DIY ka and extra care in handling glass.
For the fittings & glass available [COLOR="Red"]Here
Re: Glass & Glazing Works
Glass to Wall - Single Point Fitting
for Glass 10mm - 12mm thick.Fix to wall using Fischer wall plug (SX-10) and MS Round Head Screw #14 x 2 1/2". Left part of the picture. Beside is the assembled single point fitting
Actual application on glass railing
Each glass panel weighs around 30-48 kg (1/2" thick tempered glass).
Stainless steel top rail na lang ang kulang. Hole on the upper portion of the glass is for the bracket that will hold the top rail.
Re: Glass & Glazing Works
This is good stuff .....
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Glass & Glazing Works
Update on my glass railing project. Stainless steel tubular 1" x 2" x 1.5mm thick T-304 already installed. Stainless rail bracket used to hold the tubular on the glass panel.
Now I feel relaxed... this project stopped me in joining the Bosch Woodworking contest. I can now start my wooden toolbox..... 🙂
Re: Glass & Glazing Works
HEHEHEHE, Yes bro you may not have participated in the tool box contest but with your awesome out put in this project of yours, padre, WINNER KA NA DITO !!!!!!!
Bro bryant, truly you are good and can deliver, siguro team up na naman kayo ni swmbo dyan ano ???
ANG GALING MO BATA !!! :chopper: AMEN AKO !!! :worthy:
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Re: Glass & Glazing Works
no worry bryant...
you are a clear winner dyan sa project mo na yan...
great job !!!
Re: Glass & Glazing Works
very[professional work brader.
thanks for sharing.
now i know whom to contact if someone asks for these kind of works.
V
The devil will find work for idle hands to do.-Morrissey
Re: Glass & Glazing Works
thanks mga brader,
If the budget permit, I will try this suspended glass canopy using 1/2" thick bronze glass with nanotech using this kind of fittings.