Hi,
My garage floor is made up of matte-finish tiles. The sales clerk of the shop where I bougth the tiles said that it wouldn't be slippery when it gets wet. However, that's not true.
My garage is slanted and when it gets wet, the tires of my car slides specially when I park backwards.
I wanted to do something to solve this without too much work and cost and at the same time maintain good looks. 🙂
What would you suggest?
Thanks!
Re: How to Make Garage Non-Slippery
I think you have a steep garage. There's available anti-slip compound at home depot but I'm not sure if it will solve your problem.
You can replace the existing with anti-slip tiles. Only the tiles that on-track with your tires NOT the whole garage. That will be few pieces only.
Re: How to Make Garage Non-Slippery
Bro there is another possible way to address your problem and if you are amenable to sacrifice your tiled garage, you can apply an anti-slip rubberized paint on the entire flooring of your garage, and this rubberized paints comes in some shades of gray, maroon, green, red and even yellow.
Or as what have bro bryant said, replacing some parts of your garage tiles with an anti-slip tiles. These tiles come in 8in X 8in, 10in X 10in or 12in X 12in. Duon mo lang sya ilalagay sa dinadaanan ng mga gulong.
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Re: How to Make Garage Non-Slippery
Or replace it with 4WD for better traction.
It will add good looks on your garage & to the owner not too much work but a little bit costly.
Re: How to Make Garage Non-Slippery
Or yung parang sandpaper strips na ginagamit sa hagdan. Self-adhesive na yun. Cut to short strips and stick them across the path of the tires.
I'd try this first because its the easiest and probably cheapest.
Posted via PHM Mobile
Re: How to Make Garage Non-Slippery
nasabi na nila yung isasa suggest ko...
pero me naiisip ako eh....me grinder ka ba? lagyan mo ng masonry cutting diamond disc...gumawa ka ng shallow cuts 5 cm in between sa mga tiles..pagtyagaan mo...
this is one of the dustiest pero epektib.
:whipass:
The devil will find work for idle hands to do.-Morrissey
Re: How to Make Garage Non-Slippery
ngapala...yung 2 car garage ko na 14 feet by 24 feet eh nilagyan namin ng rubberized paint.
baka mahulog ka sa upuan kung sabihin ko sayo kinagat ko na 1400 pesos per gallon (brand name withheld upon request) plus 300 pesos na catalyst (of course same brand)...2 gallon naubos ko..dapat tatlo pero ayoko na..it works..madali linisin..hindi kinakapitan ng dumi yung paint...
mas mahal yung Bronco brand..1700pesos per gallon! yay!
btw..yung self adhesive strips na ginagamit sa bath tub or bathroom..in time naba bakbak yung adhesive...you can buy it in rolls 2 inches lapad max...sa mall hardwares...
covered garage ba yung sa iyo? hindi kasi maiwasan mabasa garage..lalo na pag tinatamad ibaba sa washing area...how slopy ba? 15 degrees is too much i guess...uusad talaga lalo na pag pudpod na tyres mo..
magpalit ka na din kaya ng tires...yung high terrain..hehe..naku!
The devil will find work for idle hands to do.-Morrissey
Hi po. What brand po ng rubberized paint ang ginamit nyo? Pwede po kaya sya sa tiles?
