Forum

Share:
Notifications
Clear all

Stainless or Steel railing

14 Posts
8 Users
0 Reactions
103 Views
(@chadrix)
Posts: 19
Active Member
Topic starter
 

Need your advice regarding outdoor stair railing.

Ano po ba ang best choice sa dalawa?
Nag inquire ako sa mga shops almost triple ang cost ng stainless compared sa steel 🙁
Naisip ko lang is less maintenance yun stainless. Weird lang pag tinatanong ko yun mga shops if anong grade nun gamit nila, madalas sinasabi lang nila high-grade. Hindi nila sinasabi if 202 or 304

Because of budget na rin naiisip ko na lang mag steel. kami na lang ng friend ko mag welding:D
Mahirap po ba ang maintenance ng steel?
Tumatagal po ba ang tubular steel pag outdoor?

TIA

 
Posted : 12/10/2012 11:41 am
horge
(@horge)
Posts: 226
Estimable Member
 

Re: Stainless or Steel railing

In a private residential context:
A good marine epoxy primer and several coats of a good enamel paint
will keep your MS in great shape for many years. Even if you factor in
stripping/repainting costs every several years, MS will still cost less than
SS. Kahit outdoors pa siya, with a good finish, it's contact-wear, rather
than exposure to rain that will cause sustainability/corrosion concerns:
only with the finish compromised can moisture do its dirty work. With
exposure to strong sunlight your finish color admittedly will fade within
1-3 years, though.

In high-traffic/commercial context, the need to refinish painted MS is
a more frequent concern (said finish being worn down faster by high
traffic), with both material and labor costs piling up each time, and the
lower-maintenance charm of SS shines brightly.

JM2

 
Posted : 12/10/2012 11:54 am
rosy
 rosy
(@rosy)
Posts: 4307
Member
 

Re: Stainless or Steel railing

Will the railings be used for a private residential home, perhaps yours ???

Let me start with square or rectangular BI tubings. I have seen others use this because its cheap and varies in sizes in term of dimensions and its light. After installation, it is immediately cleaned of rust then painted with several coats of steel primer epoxy, then the desired top coat finish. Problem with this material is that they rust easily specially inside where welds have been applied and you may be doing repairs sooner than you think specially when it is placed out in the open.

With GI pipes, specially the thicker gauges/schedules will do just fine, it will last longer and does not rust immediately even without a steel primer epoxy coating but of course I'll still coat it with the primer then the additional desired finish coating if it is installed in the open. This is a bit expensive than the BI tubing/pipes and a bit heavy but that's ok, what's important is when welded and coated properly, you won't have a problem repairing it for a long long time. Baka yung finished coating lang ang gusto mong palitan. 😉

With stainless steel pipings or tubings, well we all know naman it will be the best material, only yes it is very very expensive 😮 but sure using this for railings will make a residential house look good and flashy in terms of aesthetics considering the fact if the railing are well designed.
Using SS will require less maintenance if non at all, you just have to wipe the surface with "GLO" or spray some Pledge to keep it new and shiny.

Try to avoid using the first material, still not worth it and it will give you problems sooner than you expected. 🙁

Hope this helps and good luck on your project.

CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw

 
Posted : 12/10/2012 2:39 pm
(@chadrix)
Posts: 19
Active Member
Topic starter
 

Re: Stainless or Steel railing

Sir Horge and Rosy

Thank you for the very informative suggestions. I will go for SS, save up and find a good fabricator 🙂
Last week we made an indoor stair railing for the 2nd floor of our house. Hahaha guilty on the BI square tubes. Spent almost 2.5k for a railing using 2x2 and 1x1 BIs for handrails/baluster. Ang mura.. sana lang wag ako mapamura next year 🙂

 
Posted : 13/10/2012 12:42 am
rosy
 rosy
(@rosy)
Posts: 4307
Member
 

Re: Stainless or Steel railing

@ chadrix,

Brad its not really that bad naman pala , you installed it pala inside the house so I guess the materials you used will last you long. Just watch out for any signs of rusting on the joints, if you see some paint peeling or "bulutong" immediately address the upcoming problem. 😉

CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw

 
Posted : 14/10/2012 1:34 pm
(@chadrix)
Posts: 19
Active Member
Topic starter
 

Re: Stainless or Steel railing

@rosy

our not so perfect indoor railing 🙂

Another set of railing for the stairs outside

 
Posted : 14/10/2012 3:58 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Stainless or Steel railing

Looks good to me ... after the final paint job then it will look great.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 14/10/2012 4:18 pm
rosy
 rosy
(@rosy)
Posts: 4307
Member
 

Re: Stainless or Steel railing

@rosy

our not so perfect indoor railing 🙂

Hey there again bro chadrix, what is perfect in this world, perfection is just in the eyes of the beholder in terms of aesthetics. Like what I said, since you installed your stair railings inside your house, then I guess there is nothing to worry about, its not exposed to the harsh elements outside like rain or strong winds and heavy traffic etc, your railings will do just fine, simply coat it or finish it with your desired top coat paint, it will look great and beautiful na at " hindi ka na mapapamura " next year or maybe 10 years from now, hahahaha, LOL

Another set of railing for the stairs outside

Bro with regards to your picture above, well looking at it, your railing in mind will for sure be exposed to the elements so its gonna be a choice between GI pipes or Stainless steel tubings, I will not discuss anymore pricing/costings aspects, you know that already. Are you fixed on that choice because you can opt for concrete railings or some beautifully designed ceramic balusters. Just a suggestion or an option kasi ito sigurado walang kalawang and this might end up cheaper in the long run.

Thanks for posting some pics, at least you where able to show where you have installed and intended to install your railings.

Again good luck on the project !!! :cheerleader:

CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw

 
Posted : 15/10/2012 1:37 am
(@chadrix)
Posts: 19
Active Member
Topic starter
 

Re: Stainless or Steel railing

ill post new pics after painting it 🙂
Great idea on the concrete railings. Will try to play with some designs to see if my mother will approve it 🙂

 
Posted : 15/10/2012 5:29 pm
(@chadrix)
Posts: 19
Active Member
Topic starter
 

Re: Stainless or Steel railing

haha i received a lot of negative inputs after showing the picture of the outside stairs last week to a feng shui master. Advice was either change the door position , place a 2nd door , or make a zigzag design on the steps and paint the rails red 🙁

 
Posted : 21/12/2012 9:30 am
ossie
(@ossie)
Posts: 1210
Noble Member
 

Re: Stainless or Steel railing

kung ako po naman ang tatanungin?

hindi ko ide-defeat ang function ng project, handrail ay dapat ma gra grab mo yung hahawakan mo ng walang kahirap hirap, dahil hindi mo masasabi na baka bigla kang madulas o ano pa man, biglaan kang mapapahawak sa handrail na makakatulong sa iyo upang makaiwas sa anumang pagbagsak.

suggestion: maaari mong patungan ng kahoy yang ibabaw ng handrail na usual nating nakikita sa mga hagdanan na pabilog at walang kanto sa ibabaw, upang madaling hawakan.

ang sarap ng feelings kapag nakaka accomplished ng project ano? hehehe

ingat at enjoy your project sir.

[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!

 
Posted : 21/12/2012 11:31 am
(@willyfernando)
Posts: 799
Prominent Member
 

Re: Stainless or Steel railing

haha i received a lot of negative inputs after showing the picture of the outside stairs last week to a feng shui master. Advice was either change the door position , place a 2nd door , or make a zigzag design on the steps and paint the rails red 🙁

Or you can get the opinion of another Feng Shui master to check if they have the same advice before you reconfigure your build.:D:work:

 
Posted : 21/12/2012 7:48 pm
(@bigfoot2)
Posts: 362
Reputable Member
 

Re: Stainless or Steel railing

Stairs thats leading straight into a door has usually been a no-no in feng shui. Also, your stairs seems to be pretty steep, or is it just the camera angle?

Dumb mistakes will always be dumb mistakes, unless . . . . you learn from it, and then it will be learning experience.

 
Posted : 21/12/2012 11:23 pm
(@rinox)
Posts: 1
New Member
 

Rinox offers a wide range of products in Stainless Steel Railing, Stainless Steel Handrail, Handrail Accessories, Glass Handrail, Glass Clip, Cable Railing. RINOX products are installed in thousand of locations worldwide including Airport, Shopping Malls, Office Building, Residential Projects, Hospital, Metro Station etc.

 
Posted : 03/10/2016 9:22 pm
Share: