I have a project needing evaluation quickly, i have all drawings and can email them to you, if you can evaluate these and sign with appropriate analysis, etc... i am willing to pay 10k pesos if this can be accomplished in a day, willing to bring them to you in person if you are around metro manila, am personally near sm fairview but willing to travel to southwoods if i have to to get the documenation i need so we can get the permits needed and apply for wife's pagibig loans to complete the project on time, its due to be complete in three weeks, yes i know pagibig may take that long to complete alone, but yeah... anyway if any structural engineer on here wants to make an extra 10k for a couple hours of work hit me up on here and will email the drawings to you.
Re: structural engineer please apply....
Due to the urgency of the post I'm making this a sticky for now.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: structural engineer please apply....
Due to the urgency of the post I'm making this a sticky for now.
why? ........
click my signature and it will take you there........
Re: structural engineer please apply....
why? ........
He has a 3 weeks deadline. Needs to find a structural engineer quickly and I hope someone can help.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: structural engineer please apply....
He has a 3 weeks deadline. Needs to find a structural engineer quickly and I hope someone can help.
ok........... but if someone needs wood or anything else in the next two weeks I hope you don't make that sticky too....
click my signature and it will take you there........
Re: structural engineer please apply....
ok........... but if someone needs wood or anything else in the next two weeks I hope you don't make that sticky too....[/QUOTE
LOL
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: structural engineer please apply....
Thanks Jay, hopefully that service i found at sulit will be able to help me, will let you know if this will still be needed after today.
Re: structural engineer please apply....
@ Nomas
I'll PM you the contact no of my consultant (Structural Engineer). He's also a consultant in QC Government.
Re: structural engineer please apply....
thanks bryant and balarila... will be in touch soon, have a line on a guy, but now trying to get drawings we signed back from contractor. i love this site.
Re: structural engineer please apply....
I hope OP has already resolved his contractor issues.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: structural engineer please apply....
Ok so thanks again for everyone's advice and info. Much against my advice and the advice of those on here, we have stuck with this contractor. The deadline for completion is tomorrow, he is maybe 90 percent complete, more like 80. He has continued to try and cheat us at every turn, i told him we would have wifes brother run drawings for permits, so he brings in his buddy from city hall to feed us some bs that he is the one to sign the approval, then tells us a week later that he needs 78k to process it and we can pay him in installments if we like cause it will take two months to get the permits. Luckily he wanted soo much, my wife was keeping that info from me and stressing at her work so badly one of her friends asked her why and wouldnt you know it... the friend is related to the boss of the contact at city hall... they had lunch yesterday, he will process it for us. Thank god... contractor started painting the other day, i noticed he was using davies, our contract was estimated for boysen. When we chose colors he gave us swatches for ACE and we asked at that point what colors can we choose, his reply was choose any of them, you can go to ACE and they mix it right there for you... I noticed the swatches were ACE brand paint and not boysen so i went to ACE and checked prices... realized quickly Davies is the cheapest paint they carry. So when he started painting initially with davies i asked at least ten times why davies why davies... reply was they wanted to test the color, we chose a red for the main floor walls, everyone was kind of curious why such a red color when i suggested it so i thought naturally they wanted to see what it would look like.. everyone liked it... thing is they had six little cans of that red and kept painting it... they only finished about half way when i finally had enough and insisted why arent we using boysen... his reply is they don't make latex semigloss boysen in red... my reply was we dont want semigloss we want satin finish... his paint estimate says he needs 8 tins of boysen flat latex priced at 1810 per tin. 5 tins of semigloss boysen latex priced at 2190 per tin.... the davies he was trying to use on our walls, 569 per tin... If i were a different man... this guy would at a minimum be in the hospital. anyway, you guys are great and thanks for letting me vent. Oh yeah also.. this doesnt need to be pinned anymore... thanks for that by the way and for those i who offered me assistance and i didnt call you... it wasnt my choice, wife refuses to fire this guy. Thanks anyway.
Re: structural engineer please apply....
I hope all works out well in the end.
I'm just wondering if the contractor had not made a bid low enough that he's painted himself into a corner or he just plainly wants to cheat to get more milk out of the contract.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS