Forum

Share:
Notifications
Clear all

Marble re-surface and polish

6 Posts
3 Users
0 Reactions
48 Views
opzuk4x4
(@opzuk4x4)
Posts: 146
Estimable Member
Topic starter
 

Hi! any Tips on how to DIY re-surface and polish old and dull marble floor? Wet sanding is not within the budget.

GACA CONSTRUCTION

 
Posted : 03/07/2009 7:15 pm
(@jobongjoel)
Posts: 1
New Member
 

Re: Marble re-surface and polish

Same problem here...wish someone can help us on this one 🙂

 
Posted : 18/08/2009 8:23 am
opzuk4x4
(@opzuk4x4)
Posts: 146
Estimable Member
Topic starter
 

Re: Marble re-surface and polish

Same problem here...wish someone can help us on this one 🙂

I was actually able to solve this problem by sanding using a 4"angle grinder. I started with an 80 grit then, 100, 120, 150 then finished with 180grit. light circular strokes did it. I finished with wax and a polishing head.

GACA CONSTRUCTION

 
Posted : 18/08/2009 10:48 am
(@mr_doods)
Posts: 12
Active Member
 

Re: Marble re-surface and polish

I was actually able to solve this problem by sanding using a 4"angle grinder. I started with an 80 grit then, 100, 120, 150 then finished with 180grit. light circular strokes did it. I finished with wax and a polishing head.

Sir, based on your experience with marble repolishing, how large does 1 sanding disc able to cover on average? I'm about to DIY marble restoration and i'm on the preparation stage. I will try to do wet sanding using a polisher/sander .

And does anybody know where i can get Polishing Powder here in Manila?

Thanks!

 
Posted : 31/07/2010 11:33 am
opzuk4x4
(@opzuk4x4)
Posts: 146
Estimable Member
Topic starter
 

Re: Marble re-surface and polish

Sir, based on your experience with marble repolishing, how large does 1 sanding disc able to cover on average? I'm about to DIY marble restoration and i'm on the preparation stage. I will try to do wet sanding using a polisher/sander .

And does anybody know where i can get Polishing Powder here in Manila?

Thanks!

Sorry but I cannot remember anymore, my guesstimate is around 10-15 sqm per disc.

GACA CONSTRUCTION

 
Posted : 01/08/2010 10:59 pm
(@mr_doods)
Posts: 12
Active Member
 

Re: Marble re-surface and polish

Sorry but I cannot remember anymore, my guesstimate is around 10-15 sqm per disc.

Thanks sir!

 
Posted : 02/08/2010 4:22 pm
Share: