Re: My fiberglass DIY

lahat ng kailangan mo nariyan sa PolymerProduct website, maski yung pangkulay nariyan hehe

nag training ako dyan sa Polymer ng fiberglassing - nakagawa ako ng isang project pero hindi ko talaga nakayanan ang kati hehehe

naghahanap ako ngayon ng fiberglass na yung dinidikit na lang 😀

more projects to come sir!!!

Re: My fiberglass DIY

nag training ako dyan sa Polymer ng fiberglassing - nakagawa ako ng isang project pero hindi ko talaga nakayanan ang kati hehehe

Hmmm...didn't they teach you at Polymer what to wear when sanding fiberglass? Some boatbuilders taught me to cover as much parts of my body (long sleeves, kapote, gloves, Tshirt wrapped around the head ala Ninja, long pants...) then apply baby powder on parts of my body that are left exposed.

Re: My fiberglass DIY

lahat ng kailangan mo nariyan sa PolymerProduct website, maski yung pangkulay nariyan hehe

nag training ako dyan sa Polymer ng fiberglassing - nakagawa ako ng isang project pero hindi ko talaga nakayanan ang kati hehehe

naghahanap ako ngayon ng fiberglass na yung dinidikit na lang 😀

more projects to come sir!!!

Yup bro been getting my supplies from polymer and benquin 🙂 I signed up on their jan 22-24 seminar next year also 😀

Sent from my GT-N7100 using Tapatalk

Re: My fiberglass DIY

Hmmm...didn't they teach you at Polymer what to wear when sanding fiberglass? Some boatbuilders taught me to cover as much parts of my body (long sleeves, kapote, gloves, Tshirt wrapped around the head ala Ninja, long pants...) then apply baby powder on parts of my body that are left exposed.

True... always make sure to be properly covered and protected from fiberglass fibers specially the small once that can't be seen and inhaled. So wearing a cover all, goggles, gloves and mask is essential.

Sent from my GT-N7100 using Tapatalk

Re: My fiberglass DIY

This is how I work with fiberglass:

Used a plastic kapote (>P30). Parusa lang sa init!

Re: My fiberglass DIY

This is how I work with fiberglass:

Used a plastic kapote (>P30). Parusa lang sa init!

Hehe ... this is when baguio weather really comes in as a blessing... when I put on all those ppe's 🙂

Sent from my GT-N7100 using Tapatalk

Re: My fiberglass DIY

This is how I work with fiberglass:

Used a plastic kapote (>P30). Parusa lang sa init!

WHOA !!!! Nagulat ako sa get up mo bro ding, akala ko one of those characters sa Starwars, LOL

Nevertheless its still good to be informed on what to expect to wear during fiberglass working sessions, thanks for sharing this. Really had no idea that one has to be fully covered against those minute fiberglass dusts fibers. 😮

CHEERS