Good day to all! I'm Manny from taytay rizal, since I'm from taytay in which carpentry is our main industry I have a very much interest in woodworking. Actually I came from a family of carpenter, My father, and all of his brother are all carpenters(5 of them) although only a few of my cousins are carpenters, I want to pursue carpentry as a hobby. Dati may my sash factory ang family ng tatay ko pero ngayon yung isang pinsan ko na lang ang natitirang may shop. Since nung bata pa ako lumaki ako na ito ang kabuhayan namin, gusto ko sana mag karpintero unfortunately ang sabi kasi ng tatay ko at mga tiyuhin ko na wag silang gayahin na karpintero lang kelangan daw ay mag aral kami para mabago ang career at kabuhayan namin.to make my story short,ngayon na may ibang kabuhayan na kami, gusto ko na maging hobby ang carpentry at alam ko po na maraming akong matututunan at mapupulot na karunungan dito. Sa ngayon po ako ay isang Instructor ng mga Computer Courses sa isang traning center. Problem ko lang kung kelan pwede na ko mag carpentry saka naman nawalan ng shop ang family namin.huhuhu!:(actually i have so many interests like gusto ko rin mag aral ng welding and metal works.
Re: Newbie from Taytay, Rizal
Manny, we have cross paths before iirc, welcome to PHM enoy the site and do keep it clean.
Cheers
click my signature and it will take you there........
Re: Newbie from Taytay, Rizal
hi sir timber! thank you for the warm welcome, yes sir we've cross paths before, naging busy lang po sa work kaya hindi masyado active dun sa kabila but now is vacation time for me kaya sana e may magawa akong project.
Re: Newbie from Taytay, Rizal
actually sir timber, kala ko nga matagal na ko member dito kasi yung mga nababasa ko ditong post ay familiar na members na sakin, nung mag try ako mag log-in, di pala ako member dito hahaha!kaya ayun ngayon lang nakapag register! dun lang pala sa tpc ako member hehehe!:D
Re: Newbie from Taytay, Rizal
Good day to all! I'm Manny from taytay rizal, since I'm from taytay in which carpentry is our main industry I have a very much interest in woodworking.
Sa ngayon po ako ay isang Instructor ng mga Computer Courses sa isang traning center. Problem ko lang kung kelan pwede na ko mag carpentry saka naman nawalan ng shop ang family namin.huhuhu!:(actually i have so many interests like gusto ko rin mag aral ng welding and metal works.
HI there Mannymekaniko,
Its nice to know that another new member is sprouting from eastern Rizal side, our number are increasing, hehehehe.
Bro, welcome to the PHM community, I'm also from the eastern part of Rizal, and know also some artist friends in your town. I'm an artist too and have come to love also the use of a welding machine and also into metalworking. Reading from your intro that you have the interest too in learning how to weld and probably do some metal working. :rolleyes: :p
Bro may I firmly suggest if you have the time to spare, that you enroll in a welding training school like Tesda, and there is one in Binangonan, I think this is the best place near you on how to learn the proper way to use a welding machine and how to weld metals properly. Do inquire sometime for their new scheds on when their new batch for NC 1 will start. Minsan kasi pre mahirap yung matuto ng pag weld sa patingin tingin lang, kulang kasi sa tamang kaalaman, pamamaraan at pag gamit ng welding machine. To be honest with you its not just putting two metals together, its more than that, mas malalim pa pala if you will really be interested in the machine and its wide uses. Anyway goodluck on your interests and again, WELCOME !!!! 😀
--------------------------------------
Additional tip here, there is also a training center in Angono Rizal, just behind the municipal building, if you are interested, mag tanong tanong ka na lang duon.
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Re: Newbie from Taytay, Rizal
HI there Mannymekaniko,
Its nice to know that another new member is sprouting from eastern Rizal side, our number are increasing, hehehehe.
Bro, welcome to the PHM community, I'm also from the eastern part of Rizal, and know also some artist friends in your town. I'm an artist too and have come to love also the use of a welding machine and also into metalworking. Reading from your intro that you have the interest too in learning how to weld and probably do some metal working. :rolleyes: :p
Bro may I firmly suggest if you have the time to spare, that you enroll in a welding training school like Tesda, and there is one in Binangonan, I think this is the best place near you on how to learn the proper way to use a welding machine and how to weld metals properly. Do inquire sometime for their new scheds on when their new batch for NC 1 will start. Minsan kasi pre mahirap yung matuto ng pag weld sa patingin tingin lang, kulang kasi sa tamang kaalaman, pamamaraan at pag gamit ng welding machine. To be honest with you its not just putting two metals together, its more than that, mas malalim pa pala if you will really be interested in the machine and its wide uses. Anyway goodluck on your interests and again, WELCOME !!!! 😀
--------------------------------------
Additional tip here, there is also a training center in Angono Rizal, just behind the municipal building, if you are interested, mag tanong tanong ka na lang duon.
hello sir! fellow Rizalian!hehehe,actually sir Instructor po ako sa Traning Center dito sa Taytay and we actually offer welding(SMAW) at kung mag aaral po ako ay libre sana(instructor's Privilege) kaso kasabay kasi lagi ng Course na tinuturo ko kaya di rin ako makakuha,pwede sana sa ibang branch kaso layo naman,antay na lang siguro ako na mabakante ang sked ko!
sana mag ka EB tayong mga taga Rizal para at least magkakila-kilala po tayo!Thank you sir for warm welcome!:thanks:
Re: Newbie from Taytay, Rizal
@sir rosy sir may mga friends po ako na artist din from Group Artist of Taytay(GAT) ako din po personally e nahilig din sa art particularly sa charcoal painting kaso medyo sa dami ng hobby e kelangan bitawan yung iba hehehe,natuklasan ko lang po na may konting talent ako nung College na ko at sinubukan ko mag drawing ng portrait ng GF ko(w/c eventually became my SWMBO) e nagulat din ako sa naging result sabi ng friend kong artist ay way much better pa dun sa ginawa nya, w/c is the same picture ang pinagkoyahan.
Re: Newbie from Taytay, Rizal
@ Mannymekaniko,
Well ayun naman pala eh, if what you say that you are an instructor in a Training Center in your town, then its only availability of time and lots of efforts that you need to be able to learn how to weld metal. Its just right under your noses since you said you are also offering SMAW training in your center, plus libre pa as an instructor priveledge, so GO GO GO and take the plunge !!!
Maybe if you have time this Saturday, Feb. 18th, we have a grand EB in Makati, you are invited to join. Check out mo na lang details sa GAZEBO, Grand EB, PHM AND BOSCH then maybe you can sign up on the list.
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Re: Newbie from Taytay, Rizal
@ Mannymekaniko,
Well ayun naman pala eh, if what you say that you are an instructor in a Training Center in your town, then its only availability of time and lots of efforts that you need to be able to learn how to weld metal. Its just right under your noses since you said you are also offering SMAW training in your center, plus libre pa as an instructor priveledge, so GO GO GO and take the plunge !!!
Maybe if you have time this Saturday, Feb. 18th, we have a grand EB in Makati, you are invited to join. Check out mo na lang details sa GAZEBO, Grand EB, PHM AND BOSCH then maybe you can sign up on the list.
Oh my!sayang naman, di ako pwede ng saturday,may prior commitments na ako, Taytay town fiesta parade kasi yung Saturday feb 18,sayang naman last year di rin ako nakasama dyan sa Bosch EB na yan waaaahh!Umabsent pa naman ako sa work dahil dun sa Commitment na yun!:confused:
