Hi guys. Does anyone know where I can get soapstone marker for metal work? or what is a good substitute for it? Thanks 🙂
Sent from my Samsung Note 2 using Tapatalk 4 Beta
Re: About soapstone marker
Hi amboy,
You can source soap stone marker from your local hardware store..pag rough marking mo gagamitin ok yan..but when presicion marking is needed i always use scribe..
Hindi nabubura,maliit lang yung mark na na iguguhit nya kaya ang margin of error almost zero..:)
Hi amboy,
You can source soap stone marker from your local hardware store..pag rough marking mo gagamitin ok yan..but when presicion marking is needed i always use scribe..
Hindi nabubura,maliit lang yung mark na na iguguhit nya kaya ang margin of error almost zero..:)
Tnx for the info bro bugel. Forgive my ignorance... but what's a scribe? 😀
Sent from my Samsung Note 2 using Tapatalk 4 Beta
Re: About soapstone marker
http://www.midwayusa.com/product/436848/starrett-pocket-scribe-steel
Simple pointed metal na pwede lang panguhit sa bakal..
Yung gamit ko DIY lang..broken drill bit na nilagyan ko lang ng handle
Then hinasa ko sa bench grinder yung tip para tumulis..
Si sir jay meron nyan..carbide tip pa..
Oh ok hehe tnx for the info 🙂
Sent from my Samsung Note 2 using Tapatalk 4 Beta
Re: About soapstone marker
HI there bro amboy,
For your scribe, if you can get a piece of a stainless steel rod,about 6 mm in diameter or 10 mm in diameter and perhaps about 8 or 12 inches in length, this would be a good substitute as your scribe, you just have to sharpen on end tip to a pin point sharpness, then add a handle if you prefer and there, you now have an instant scribe, stainless steel is a tough and hard steel.
See if you can get even a scrap piece ! 😉 :p
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Hi bro rosy,
My level square actually came with a metal pointed marker which I have been occasionally using and now that I know what a scribe is... I have one na pala hehe. But I do intend to diy one based on what you guys suggested 🙂 though was also able to get soap stone in t. Alonzo yesterday. Tnx bro 🙂
Sent from my Samsung Note 2 using Tapatalk 4 Beta
Re: About soapstone marker
Well bro, glad to know you were able to get your much needed soapstones. Are you here in MANILA now, I thought you are in Baguio.
Just curious. hehehe
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Well bro, glad to know you were able to get your much needed soapstones. Are you here in MANILA now, I thought you are in Baguio.
Just curious. hehehe
Hi bro rosy,
Was in manila since last thursday was able to meet up wid bro jay pa nga in his place also to check some of the stuff that I wanted to get from him 🙂 though on my way back to baguio now... am actually at Total station in NLEX now for a quick lunch 😀
Sent from my Samsung Note 2 using Tapatalk 4 Beta