here is my wip i bought 2x2 x 1.5mm cost P680.pesos
2x2 x 2 1/2 long for footings
cut it into 45 deg.
close up cutting
Re: metal stand for washing machine
first bend
second bend
final bend
19 x19 inc. square
Re: metal stand for washing machine
here is the final stand tomorrow is for full welding hehehe
Re: metal stand for washing machine
here is my wip i bought 2x2 x 1.5mm cost P680.pesos
How long is 680 pesos worth of square tube?
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: metal stand for washing machine
Ang mahal pala ng square tubing na nabili ni ryobi because I was just canvassing for some flat bars and assorted sizes of tubings at our nearby metal and tubing store this afternoon and their 2 X 2 X 20 ft costs 635.00 pesos only, I thought mahal na yon, ah e ok na pala yon compared to ryobi's purchased price of 680.00 pesos. OH its also 1.5 mm thick.
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Re: metal stand for washing machine
naku, namamahalan na kayo doon? e barya lang kay Ryobi yan 😀
goodluck at galingan mo sa paglalaba 😮
[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!
Re: metal stand for washing machine
Nice.
Why do you need a stand for your washing machine?
Re: metal stand for washing machine
Ang mahal pala ng square tubing na nabili ni ryobi because I was just canvassing for some flat bars and assorted sizes of tubings at our nearby metal and tubing store this afternoon and their 2 X 2 X 20 ft costs 635.00 pesos only, I thought mahal na yon, ah e ok na pala yon compared to ryobi's purchased price of 680.00 pesos. OH its also 1.5 mm thick.
mas mura pala dyan 45 pesos ang difference dito sa laguna
Nice.
Why do you need a stand for your washing machine?
here is why my 10 year old washing machine has been retired already and it have a foot
and this is new American home brand name need to raise up because my maid where doing manual laundry
naku, namamahalan na kayo doon? e barya lang kay Ryobi yan
goodluck at galingan mo sa paglalaba
hindi naman oz apat sana bibilhin ko he kaya lang marami pang pending na project hehehe
How long is 680 pesos worth of square tube?
its 20 feet jay
Re: metal stand for washing machine
to continue my task
preparing for full weld at stand position
before i start to weld i want to make sure its square
my first weld
Re: metal stand for washing machine
from your first weld, it shows good penetration, good speed.
anung welding rod mo? and amperage setting?
sa smaw manual c/o Jay says yung 6013 rod between 75-100A lang daw...i hope i can try welding soon but i got work tomorrow.
tapusin mo na yan bro..inip na labandera nyo..hehe
The devil will find work for idle hands to do.-Morrissey
Re: metal stand for washing machine
my second weld
my third weld
and so on
full weld
Re: metal stand for washing machine
spot weld the foot first
after spot weld the foot change the position for full weld
and here is the finish product after grinding and ready for paint epoxy primer and paint black enamel it is much better if there is a rubber footings
Re: metal stand for washing machine
grabe ryobi!!!
e pang laundry job palang yan ah.
walastic na ang pagkapulido ng welding mo...:p :p
expert ka na...;)
Re: metal stand for washing machine
Sir Ryobi,
newbie question lang po..
how did you cut the 45 without cutting the metal through...
Re: metal stand for washing machine
Sir Ryobi,
newbie question lang po..
how did you cut the 45 without cutting the metal through...
sorry for my late reply hehehe 😀 very simple lang yan bro I used metal hack saw
