Re: Welding Newbie

kukuha nyan malamang si JLo (JayL) 😀 direct importer yan e hehe

tsk tsk ang gaganda ng helmet deeg pa helmet ng motorbike

Re: Welding Newbie

my DIY Poorman's Paint Mixer 😀

i have only 1 inch wide flat bar metal so i decided to cut in a half using my ever reliable BOSCH angle grinder (flagging :D)

its bending time:

Re: Welding Newbie

not that bad:

o ha? 🙂

his little brother:

Re: Welding Newbie

Re: Welding Newbie

Go go go ossie napaki nabangan mo agad ung bender ayos yan maganda pang mix ng paint

Re: Welding Newbie

Looks like we could purchase the helmets locally. More or less the same din yan mga Harbor Freight / Northern Tools na brands from what China stuff we have here.

More important is the issue of warranty. What if the helmet does not perform as claimed or the lens die within a short duration of time. At least we could exchange it or claim warranty if it's still within the time frame.

Unless of course we buy Millers or 3M helmets ... ibang leaque na yan. Warranty can be gambled.

Lots of people should have interest in welding because it is more often than not a major house building / upgrade and maintenance related work.

Sure na ko matatag yan paint mixer ni Ossie ......

Re: Welding Newbie

go go go na sa auto darkening helmet, minsan talaga nakakabigla yung pagdikit ng rod sa metal na hindi mo inaasahan, ang labo sa mata pag nagkaganun.

regarding sa paint mixer, i tested it after, less vibration lang naman because of the slight wiggle. more wiggle = good paint mixer 😀 hahaha joke...

no. 1 na ba yung thread natin sa sa site? hehe

Re: Welding Newbie

malapit na maging no.1 ossie, knti na lang hahabulin sa woodworking threads... mga 300 threads na lang 😀

nice work, might be better if you can twist the sides of the eggbeater a bit more I think to produce more turbulence. but I think na matibay nga yan 😮

Re: Welding Newbie

konti na nga lang yan hehehehehehe

im thinking if im going to twist the 2 sides pero im also thinking baka mag talsikan masyado yung itlog hehehe

malapit na maging no.1 ossie, knti na lang hahabulin sa woodworking threads... mga 300 threads na lang 😀

nice work, might be better if you can twist the sides of the eggbeater a bit more I think to produce more turbulence. but I think na matibay nga yan 😮

Re: Welding Newbie

checking second na thread mo... with almost 10k views...
first is the midnight club with around 17K views... 😀

Re: Welding Newbie

thread ni JayL to hahahahaha

Re: Welding Newbie

OK. Who wants auto darkening helmets? Lets see if we can pull enough buyers for a group buy and check if we can get a good price from Edward at Panda. He has a China Made one he was recommending to us. One that is backed up with good warranty support. I'll check the specs later but V & I saw this already.

1. JayL

Re: Welding Newbie

thread ni JayL to hahahahaha

Sa yo na ito ngayon. Pure Metal ka kasi. Kami me halong wood. hehehhehe

Re: Welding Newbie

what is the approximate helmet price?

OK. Who wants auto darkening helmets? Lets see if we can pull enough buyers for a group buy and check if we can get a good price from Edward at Panda. He has a China Made one he was recommending to us. One that is backed up with good warranty support. I'll check the specs later but V & I saw this already.

1. JayL

Re: Welding Newbie

hindi rin!!!! hahahaha teka teka (naghahanap ng may ginawang kasamang kahoy)

ayan o, may kahoy sa base ng bender hahaha

Sa yo na ito ngayon. Pure Metal ka kasi. Kami me halong wood. hehehhehe