Forum

Share:
Notifications
Clear all

[Sticky] Welding Newbie

1,180 Posts
55 Users
0 Reactions
5,193 Views
ryobi
(@ryobi)
Posts: 694
Honorable Member
 

Re: Welding Newbie

here some addition info....as per request ossie

left and right adjustment for sensitivity and DIN

inside of helmet

 
Posted : 14/01/2011 3:45 am
ryobi
(@ryobi)
Posts: 694
Honorable Member
 

Re: Welding Newbie

here is gun chart for setting

 
Posted : 14/01/2011 3:47 am
ryobi
(@ryobi)
Posts: 694
Honorable Member
 

Re: Welding Newbie

yesterday my smart bro internet was tooooooooo slow to upload picture at photobucket 😡

@ jay
yes it was a carbon fiber design helmet made of high resistant plastic / polyamide (nylon) there are 3 design to choose other are to radical so i choose this one

@ ossie
as per request

@ doc v.
ill bring this ADH at EB and try to test it

@ timber
kung pupunta si edward (panda) kung pwede bring some 3/4 wood pipe just in case lang thanks

 
Posted : 14/01/2011 5:45 am
ossie
(@ossie)
Posts: 1210
Noble Member
 

Re: Welding Newbie

@ryobi,
thanks for posting 😀
nagamit mo na sya in actual? oks na oks ba talaga? as om OKKKKKKKKKK?? hehehe

[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!

 
Posted : 14/01/2011 10:47 am
timber715
(@timber715)
Posts: 5424
Member
 

Re: Welding Newbie

@ timber
kung pupunta si edward (panda) kung pwede bring some 3/4 wood pipe just in case lang thanks

you need pipe clamps or mag-tatabaco ka? 😀


click my signature and it will take you there........

 
Posted : 14/01/2011 12:14 pm
ossie
(@ossie)
Posts: 1210
Noble Member
 

Re: Welding Newbie

guys,

i posted the pictures i welded in one welding forums and here is reply, only one person replied yet hehehe

i dont see much to criticize.. try some "real" rods.. 6010 or 6011 and some 7018..

i need a real rod pala hehe 7018 is not available here in bacoor, dapat pala nakabili na din ako sa binondo hehe

@jay,
baka mapadaan ka at makakuha ng 7018, pa text hehehe 😀

[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!

 
Posted : 14/01/2011 9:43 pm
ryobi
(@ryobi)
Posts: 694
Honorable Member
 

Re: Welding Newbie

uy!! tuloy bukas rain or shine hehehe:D

 
Posted : 14/01/2011 10:51 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
Topic starter
 

Re: Welding Newbie

guys,

@jay,
baka mapadaan ka at makakuha ng 7018, pa text hehehe 😀

Farmer's Rod yata common name neto sa USA. I'm not sure if this is available locally. Drag rod din yata ito.

http://www.amazon.com/gp/product/B0000DD6IA/ref=noref?ie=UTF8&s=hi&psc=1

6010 I think needs a DC Welder but have not checked back this info yet.

6011 high penetration rods available locally. I use this for root passes then cap it with our magic drag rod.

Did you post sa weldingweb.com?

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 14/01/2011 11:11 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
Topic starter
 

Re: Welding Newbie

Kung minsan hindi lahat welding kaya kailangan din mag rivets lalo na sheet metal.

I specifically purchased this Contractor Grade rivet gun because specs say it can handle stainless steel rivets. I hope I can find these kind of rivets locally as I did not order some.

http://www.amazon.com/Stanley-MR100CG-Contractor-Grade-Riveter/dp/B000BR7JUG/ref=sr_1_1?ie=UTF8&s=hi&qid=1295020348&sr=8-1

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 14/01/2011 11:52 pm
ryobi
(@ryobi)
Posts: 694
Honorable Member
 

Re: Welding Newbie

you need pipe clamps or mag-tatabaco ka? 😀

hehehe the longer the better:p

 
Posted : 15/01/2011 6:11 am
ryobi
(@ryobi)
Posts: 694
Honorable Member
 

Re: Welding Newbie

Kung minsan hindi lahat welding kaya kailangan din mag rivets lalo na sheet metal.

I specifically purchased this Contractor Grade rivet gun because specs say it can handle stainless steel rivets. I hope I can find these kind of rivets locally as I did not order some.

http://www.amazon.com/Stanley-MR100CG-Contractor-Grade-Riveter/dp/B000BR7JUG/ref=sr_1_1?ie=UTF8&s=hi&qid=1295020348&sr=8-1

nice riveter solid..... not like other riveter na nasa local market madaling masira

 
Posted : 15/01/2011 6:17 am
ossie
(@ossie)
Posts: 1210
Noble Member
 

Re: Welding Newbie

@jay,
i think 7018 is enough hehehe kaso kailangan talaga malinis yung materials na weweldingin not like 6013 hehe

@ryobi,
may dala akong 8 kilong bakal, pwede natin pag practican sa eb, kaso welding machine na lang kailangan 😀 hahaha

[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!

 
Posted : 15/01/2011 10:01 am
ossie
(@ossie)
Posts: 1210
Noble Member
 

Re: Welding Newbie

what i have here is the Marson HP-2 riveter with plastic case and 4 boxes of rivets in different sizes. but i dont know if this can handle stainless steel rivets 🙂 just browse the internet and cannot find it on the specs.

[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!

 
Posted : 15/01/2011 10:37 am
JayL
 JayL
(@jayl)
Posts: 5426
Member
Topic starter
 

Re: Welding Newbie

Those are excellent riveters. Initially I wanted a Marson too but when I was informed that the new ones are Made in Taiwan already I opted for the Stanley. What you have is a very good tool and rare now a days since it's still US built.

http://www.amazon.com/Marson-39001-HP2-Professional-Riveter/dp/B000W1R50A/ref=sr_1_1?ie=UTF8&s=automotive&qid=1295066775&sr=8-1

These Harbor Freight air riveters are also getting good feedback.

http://www.harborfreight.com/catalogsearch/result?category=&q=air+riveter

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 15/01/2011 12:45 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
Topic starter
 

Re: Welding Newbie

I think this is the Jackson Helmet that Doc V was mentioning. The one being sold in Panda. Just like Ryobi's helmet this one also has 2 sensors.

http://www.jacksonsafety.com/linkdetails.cfm?groupid=3023293

@ Ossie

Thanks for bringing me the metals needed to fabricate an Ossie's Bender. Looks like it's all complete including the flat bar for the dowel catch. 🙂 Need only add a long pipe handle which I have here somewhere in the scrap pile at the back of the shop.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 15/01/2011 10:17 pm
Page 22 / 79
Share: