Re: Welding Newbie

Bilib ako sa tiyaga mo bro. Kudos to you.

Up for Sir Ryobi.

Mukhang maganda din ang sawhorse na metal for metal working.

Re: Welding Newbie

@ryobi,
some advise from a newbie like me 😀 if you dont mind...

clean the metal as much as possible, dirty metal also affects your beads in some ways.

try to weld the metal in flat position,(if you can). i saw your picture that you are welding in a vertical position (is it uphill or downhill?) develop your welding skills first to flat position, then to horizontal position, to vertical to overhead and then under water 😮

try to use 2.5mm for that build like that @ 90 deg para hindi masyado malaki kakayurin mo sa grinding 🙂 hehehe (dont forget the disc guard 😀 ) (kunwari safety conscious tayo, pero totoo naman hehe)

grabe, mas matiyaga ka pa pala sa akin hehe nice build sir!

go go go garndmaster Ryobi, gusto ko na makita yung ornamental designs na ilalagay mo

Re: Welding Newbie

Master Ossie post mo na rin yung new WIP mo. Inip na kami. Hehhehehehe

Re: Welding Newbie

[COLOR="Blue"]@master timber,

No 1 ang thread...and still growing 😀 hahahaha wag lang kakalawangin mga kamay namin gumawa ng metal hehe

checking second na thread mo... with almost 10k views...
first is the midnight club with around 17K views... 😀

@jay,
sabay sabay ko na ipost pagnatapos ko na, parang isang pasada ng tinginan lang hehe

Re: Welding Newbie

[COLOR="Blue"]@master timber,

No 1 na ang thread sa views...and still growing 😀 hahahaha wag lang kakalawangin mga kamay namin gumawa ng metal hehe

checking second na thread mo... with almost 10k views...
first is the midnight club with around 17K views... 😀

@jay,
sabay sabay ko na ipost pagnatapos ko na, parang isang pasada ng tinginan lang hehe

Re: Welding Newbie

[COLOR="Blue"]@master timber,

No 1 na ang thread sa views...and still growing 😀 hahahaha wag lang kakalawangin mga kamay namin gumawa ng metal hehe

checking second na thread mo... with almost 10k views...
first is the midnight club with around 17K views... 😀

@grandmaster jay,
sabay sabay ko na ipost pagnatapos ko na, parang isang pasada ng tinginan lang hehe

Re: Welding Newbie

[COLOR="Blue"]@master timber,

No. 1 na ang thread sa views...and still growing 😀 hahahaha wag lang kakalawangin mga kamay namin gumawa ng metal hehe

checking second na thread mo... with almost 10k views...
first is the midnight club with around 17K views... 😀

@grandmaster jay,
sabay sabay ko na ipost pagnatapos ko na, para isang pasada ng tinginan lang at hindi putol putol hehe

Re: Welding Newbie

@Ossie

Wala pa bang buyer ang AC welding machine mo para masubukan na natin yung Rillon DC Welder?

Re: Welding Newbie

nakalimutan sabihin nung kapitbahay namin sa tita nya yung welder, bukas sana hindi nya makalimutan sabihin hehe im not rushing naman e.

kelan tayo rides para kahit mig i test natin?

@Ossie

Wala pa bang buyer ang AC welding machine mo para masubukan na natin yung Rillon DC Welder?

Re: Welding Newbie

nakalimutan sabihin nung kapitbahay namin sa tita nya yung welder, bukas sana hindi nya makalimutan sabihin hehe im not rushing naman e.

kelan tayo rides para kahit mig i test natin?

Pag nabenta na yan Welder mo.

Re: Welding Newbie

Bilib ako sa tiyaga mo bro. Kudos to you.

Up for Sir Ryobi.

Mukhang maganda din ang sawhorse na metal for metal working.

@jay
thanks jay hehehe ung sawhorse actually not welded sya all are bolts and nuts lang ang ginamit ko almost 8 years ko na ginagamiyan yan its a long years na hehehe

@Master ossie
Thanks for the advice i will fallow your instruction master hehehe 😀 gagawa pa ako ng isa pang ganun thanks master

Re: Welding Newbie

@grandmaster Ryobi,
pahinga ka lang dyan sa trabaho at baka mapuyat ka 😮 may builds ka pa bukas 😀 hehehe

thanks jay hehehe ung sawhorse actually not welded sya all are bolts and nuts lang ang ginamit ko almost 8 years ko na ginagamiyan yan its a long years na hehehe

@Master ossie
Thanks for the advice i will fallow your instruction master hehehe 😀 gagawa pa ako ng isa pang ganun thanks master

Re: Welding Newbie

@grandmaster Ryobi,
pahinga ka lang dyan sa trabaho at baka mapuyat ka 😮 may builds ka pa bukas 😀 hehehe

nykk!! hahaha korek ka dyan 2% pa lang ang nagagawa ko ngayon soon matatapos ko din yan para ung aking wagon magarahe na 😎

Re: Welding Newbie

@master timber,

No. 1 na ang thread sa views...and still growing 😀 hahahaha wag lang kakalawangin mga kamay namin gumawa ng metal hehe

keep it up braders, I am also watching... 😀

Re: Welding Newbie

I ordered some welding magnets to try out.

http://stronghandtools.com/products/uniquemagnets/ms346a.html

Maybe there will be times when these will be more convenient to use than clamps.