Forum

Share:
Notifications
Clear all

Metal Scrap Source

15 Posts
11 Users
0 Reactions
94 Views
 benQ
(@benq)
Posts: 196
Estimable Member
Topic starter
 

As an offshoot thread from this thread ( http://www.pinoyhandyman.com/showthread.php?t=1053 ) , im creating this thread.
For those metalheads :rolleyes:, here is one source of cheaper metals.
If you have your own source too, please let us know. After all, not all of us is near Valenzuela.

where'd you get the metal sheets?

And the square tubes, too.
🙂

 
Posted : 01/10/2010 8:01 am
 benQ
(@benq)
Posts: 196
Estimable Member
Topic starter
 

Re: Metal Scrap Source

Along macArthur hway, Dalandanan Valenzuela, Near Meralco office
Some of these are new but most of it are scraps.

 
Posted : 01/10/2010 8:08 am
 benQ
(@benq)
Posts: 196
Estimable Member
Topic starter
 

Re: Metal Scrap Source

Aside from getting these metals at lower price.
You can also get it shorter , smaller than what the hardwares stores selling it.
If your buying pipe in Hardware stores,
You'll be forced to buy 20-feet pipe even if you'll be needing only 3 feet.
In scrap yard you'll see most of it in crazy sizes and shapes.

 
Posted : 01/10/2010 8:38 am
 benQ
(@benq)
Posts: 196
Estimable Member
Topic starter
 

Re: Metal Scrap Source


god them pipes!:eek:

 
Posted : 01/10/2010 9:21 am
(@luis-isaac)
Posts: 18
Active Member
 

Re: Metal Scrap Source

there's another one at masinag on marcos hiway just past sumulong hiway if you're going to antipolo. i forgot the name but it is beside lucban auto supply on your right.

i think the metals they sell are cut off from the metal factory. they got different sizes, brand new but a lot cheaper.

check them out.

 
Posted : 01/10/2010 10:18 am
(@john-jo)
Posts: 107
Estimable Member
 

Re: Metal Scrap Source

These are good to use infos indeed!

Can anyone give an idea of the ongoing rate per kilo?

Is a difference if the piece is tubular, solid or flat?

Thanks Guys!!

 
Posted : 01/10/2010 4:33 pm
 owyn
(@owyn)
Posts: 237
Estimable Member
 

Re: Metal Scrap Source

In my hometown, scrap metal is 30 bucks a kilo- be it grade 5 bolts or angle bars. The next town - which is home to a few industrial parks- has better choices, 35 per kilo.

....Still feel bad about a mitutoyo cross-vise used in a microscope. Essentially 2 micrometers with .01mm graduations, i left it for a week, when i came back it was sent to the real scrapper- melted down >_<.

This guy in youtube is into the hobby...
http://www.youtube.com/watch?v=GHBbWU1P_nI
http://www.youtube.com/watch?v=9GLVSw8q2Jk

The guy enjoys collecting induction motors among other things =).

 
Posted : 01/10/2010 7:40 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Metal Scrap Source

I hope I can find scrap yards like Ben posted here or near Pasay. Most of the scrap dealers I visited sell their stuff to bigger dealers who collect the pile weekly ( I believe) . The shops are not really organized for retailing and it's mostly a hit or miss depending on luck.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 02/10/2010 9:23 pm
(@bjfunk)
Posts: 3
New Member
 

Re: Metal Scrap Source

Thanks for the info on the metal scrap sellers!!! But most are in the Northern part of Manila. For the benefit of those living some where in the south here is a few cents worth of info:

EAST SERVICE RD PARANAQUE
ROMY BARBA
RONNIE
8233135 (If you are coming from Pasay, this is on the left service rd. Before approaching the bicutan area. The store is on the left right after the big Pizzahut signage ad.

EPSA #14 JP RIZAL TUGATOG MALABON
30 - 40 PER KILO 2871277

COSMOS STEEL MILL - LOWER BICUTAN AFTER
PETRON STATION - They also sell seconds at much lower prices. This is a real mill. From Bicutan go all the way down the lower bicutan area. Then turn left. Go about 2 kilometers and you will see a petron station. It will be somewhere there. You can ask the tricycle cab drivers. They would know.

 
Posted : 22/10/2010 1:56 pm
ossie
(@ossie)
Posts: 1210
Noble Member
 

Re: Metal Scrap Source

sana mayroon sa Las Piñas and Bacoor area? 😀

[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!

 
Posted : 04/02/2011 6:46 pm
(@spykersetter)
Posts: 87
Trusted Member
 

Re: Metal Scrap Source

Along macArthur hway, Dalandanan Valenzuela, Near Meralco office
Some of these are new but most of it are scraps.

parang pamilyar tong shop n to ah sa Ramos to sir benq? sa malanday

 
Posted : 29/08/2011 10:58 pm
(@spykersetter)
Posts: 87
Trusted Member
 

Re: Metal Scrap Source

meron ding scrap metal storre sa may dalandanan near puregold valenzuela N.E. Dizor ang name

 
Posted : 31/08/2011 10:44 am
(@airgunner63)
Posts: 3
New Member
 

Re: Metal Scrap Source

there's another one at masinag on marcos hiway just past sumulong hiway if you're going to antipolo. i forgot the name but it is beside lucban auto supply on your right.

i think the metals they sell are cut off from the metal factory. they got different sizes, brand new but a lot cheaper.

check them out.

Hi Luis, Is it just after Sumulong along Marcos Highway near the Masinag Market? Did you see some aluminum pipes???

I'm interested as its near me, I'm from Antipolo.

Thanks,
airgunner63

 
Posted : 05/10/2011 11:27 pm
 edtf
(@edtf)
Posts: 51
Trusted Member
 

Re: Metal Scrap Source

Hi Luis, Is it just after Sumulong along Marcos Highway near the Masinag Market? Did you see some aluminum pipes???

I'm interested as its near me, I'm from Antipolo.

Thanks,
airgunner63

this is a few meters off the junction of masinag heading towards cogeo.

There are 2 shops also along sumulong going up Antipolo - price 32-35/kg

 
Posted : 06/10/2011 8:00 am
(@marlboro)
Posts: 3
New Member
 

Re: Metal Scrap Source

Anyone of you guys know where to source electrogalvanized sheets? The shop in Valenzuela where we used to source scraps are out. Thanks!

 
Posted : 08/02/2012 11:17 am
Share: