Forum

Share:
Notifications
Clear all

Powercraft PIW200 Review w/ pics

111 Posts
16 Users
0 Reactions
790 Views
(@willyfernando)
Posts: 799
Prominent Member
 

Re: Powercraft PIW200 Review w/ pics

I intend to open up my Powercraft to inspect the inside and to do some light cleaning inside (mainly blowing air from my compressor). Will post pics of that too.

----------------------------------
Posted using Samsung Note 2 on Tapatalk 4 for Android

Pls take extreme care when using compressed air. Make sure that the air is dry and does not have moisture in it as it might affect your electrical/electronic parts. Attach an Air and water separator and wrap a piece of cheese cloth or cotton cloth with a high thread count at the blow gun tip to prevent water spatter getting in contact with electronics. :eek::electricf:

 
Posted : 28/09/2013 2:31 am
amboy
(@amboy)
Posts: 363
Reputable Member
Topic starter
 

Pls take extreme care when using compressed air. Make sure that the air is dry and does not have moisture in it as it might affect your electrical/electronic parts. Attach an Air and water separator and wrap a piece of cheese cloth or cotton cloth with a high thread count at the blow gun tip to prevent water spatter getting in contact with electronics. :eek::electricf:

Thanks for the suggestion bro willy 🙂

----------------------------------
Posted using Samsung Note 2 on Tapatalk 4 for Android

 
Posted : 28/09/2013 5:48 am
amboy
(@amboy)
Posts: 363
Reputable Member
Topic starter
 

Here's the re-fabricated chairs being painted....

[IMG] [/IMG]

Sent from my GT-N7100 using Tapatalk 4

 
Posted : 02/10/2013 10:39 am
bugel
(@bugel)
Posts: 1131
Noble Member
 

Re: Powercraft PIW200 Review w/ pics

Bro sulit na ang powercraft mo:clap:

Yan ang maganda kung marunong kang mag diy..malaki ang menos sa gastos dahil hindi kana mag hire ng gagawa..though the urge of buying tools is a bit expensive..
Hindi pala..expensive talaga!!!:p

 
Posted : 02/10/2013 1:24 pm
amboy
(@amboy)
Posts: 363
Reputable Member
Topic starter
 

Bro sulit na ang powercraft mo:clap:

Yan ang maganda kung marunong kang mag diy..malaki ang menos sa gastos dahil hindi kana mag hire ng gagawa..though the urge of buying tools is a bit expensive..
Hindi pala..expensive talaga!!!:p

Tnx bro bugel. Yup one of the advantage of diy'ng is that you can do it yourself... though the allure of buying more tools is hard to resist hehehe

Sent from my GT-N7100 using Tapatalk 4

 
Posted : 02/10/2013 2:16 pm
(@onie13)
Posts: 62
Trusted Member
 

Re: Powercraft PIW200 Review w/ pics

look great deal this dc inverter hmmmmfff...... you know about rilon?

:OT sir
made in? powercraft? and what if void warranty in 5 year there are still available parts?

 
Posted : 14/10/2013 9:46 pm
amboy
(@amboy)
Posts: 363
Reputable Member
Topic starter
 

Re: Powercraft PIW200 Review w/ pics

look great deal this dc inverter hmmmmfff...... you know about rilon?

:OT sir
made in? powercraft? and what if void warranty in 5 year there are still available parts?

In my experience the powercraft is indeed value for money. It might have been not the cheapest (not the most expensive either) but it has gotten the work done and without any glitches so far.

I dont have any personal experience with the rilon however from the threads I have seen about it on PHM it looks sturdy and well made.

Powercraft is an american brand though the inverters we have here are made in china (Taiwan I think). Standard warranty is 1 year and after looking at the parts inside the powercraft it should not be a problem sourcing out parts for it locally as most inverter welders are constructed from mosfet or 1gbt transistors.

Hope this helps bro. 🙂

Sent from my GT-N7100 using Tapatalk 4

 
Posted : 15/10/2013 10:41 am
amboy
(@amboy)
Posts: 363
Reputable Member
Topic starter
 

Re: Powercraft PIW200 Review w/ pics

Update lang guys...

Here's the finished chair:
[IMG] [/IMG]

And here's the chair in our resto... 🙂

[IMG] [/IMG]

Sent from my GT-N7100 using Tapatalk 4

 
Posted : 15/10/2013 12:27 pm
(@miked)
Posts: 440
Reputable Member
 

Re: Powercraft PIW200 Review w/ pics

sir amboy, san banda yang resto mo?? tagal ko na rin di nakabalik baguio ah. tumira ako jan ng 2 years (work) sa may kitma.

very nice work on the chairs btw.

 
Posted : 15/10/2013 1:06 pm
amboy
(@amboy)
Posts: 363
Reputable Member
Topic starter
 

Re: Powercraft PIW200 Review w/ pics

sir amboy, san banda yang resto mo?? tagal ko na rin di nakabalik baguio ah. tumira ako jan ng 2 years (work) sa may kitma.

very nice work on the chairs btw.

its actually in rosario, La union, just before reaching kennon road, besides the Shell station there. the resto is S.O.U.L. Cafe bro miked. you can check sa instagram about the cafe by searching for #soulcafe hashtag or just google soul cafe 🙂 lemme know if you're coming up to baguio 🙂

 
Posted : 15/10/2013 1:17 pm
(@miked)
Posts: 440
Reputable Member
 

Re: Powercraft PIW200 Review w/ pics

ngayon ko lang nalaman to sa tagal ko nang dumadaan at humihinto sa may caltex at shell...daan kami jan ni misis ngayong october kapag natuloy roadtrip namin pauwi ilocos.

 
Posted : 15/10/2013 1:52 pm
amboy
(@amboy)
Posts: 363
Reputable Member
Topic starter
 

Re: Powercraft PIW200 Review w/ pics

ngayon ko lang nalaman to sa tagal ko nang dumadaan at humihinto sa may caltex at shell...daan kami jan ni misis ngayong october kapag natuloy roadtrip namin pauwi ilocos.

Sure... lemme know when ur going bro 🙂

Sent from my GT-N7100 using Tapatalk 4

 
Posted : 15/10/2013 2:51 pm
(@miked)
Posts: 440
Reputable Member
 

Re: Powercraft PIW200 Review w/ pics

kayo ho ba si sir Dangal?...sorry admins, OT na.hehe

 
Posted : 15/10/2013 4:08 pm
amboy
(@amboy)
Posts: 363
Reputable Member
Topic starter
 

Re: Powercraft PIW200 Review w/ pics

kayo ho ba si sir Dangal?...sorry admins, OT na.hehe

Yup 🙂

Sent from my GT-N7100 using Tapatalk 4

 
Posted : 15/10/2013 5:06 pm
(@onie13)
Posts: 62
Trusted Member
 

Re: Powercraft PIW200 Review w/ pics

In my experience the powercraft is indeed value for money. It might have been not the cheapest (not the most expensive either) but it has gotten the work done and without any glitches so far.

I dont have any personal experience with the rilon however from the threads I have seen about it on PHM it looks sturdy and well made.

Powercraft is an american brand though the inverters we have here are made in china (Taiwan I think). Standard warranty is 1 year and after looking at the parts inside the powercraft it should not be a problem sourcing out parts for it locally as most inverter welders are constructed from mosfet or 1gbt transistors.

Hope this helps bro. 🙂

Sent from my GT-N7100 using Tapatalk 4

tnx for reply.. :thanks: kahapon po nag tanong ako sa t alonzo binondo.. Php 12,500 na po yong price niya 😮 kaso yong ibang store sarado kasi wala pasok kahapon hehehe.. kya ayon lang ang store na napag tananongan ko

sir last question.. wala na po bang modified sa saksakan nito? basta pede po saksak agad sa 220v? salamat sir

 
Posted : 16/10/2013 10:50 am
Page 4 / 8
Share: