Asturo WB Xtreme Master Kit
Premium Stainless Steel Low Air Spray Gun
LVLP Technology in an HVLP Spray Gun
5-6 CFM @ 40
Amazing Features: Super Fine Spray comparable to the Iwata at 1/2 the price
Super Low CFM - CFM
Stainless Steel Fluid Fittings and Passages (even Fluid Filters are Stainless Steel)
Nylon Waterbased / Solvent Based cup with Stainless Steel Fittings
Small Footprint (size of gun) and Small Regulator
Fully Supported with wide range of tip sets
Rebuild Kit included in package
• HVLP & HTE SETUPS Super Low HVLP Spray Gun All Stainless Steel passages fittings and tip sets die cast aluminum body
•600CC Nylon Cup with Stainless Steel Fitting
•Extreme Mini Diaphragm Regulator
•Repair Kit
•3 Stainless Steel Strainers
•Brush, spanner wrench, air filter
•Molded Case
Specifications: Air pressure 2 Bar (29 PSI), Air cap pressure (10 PSI), Air inlet
1/4” NPS (PS), Fluid inlet M 16x1.5P, Air consumption 6 CFM (283L/min)
I had the chance today to try it out, and boy oh boy... it was worth every single penny I paid for it...
Used water based poly and it gave me super fine mist with a spray pattern that easily surpasses 10" width. Controls are very easy to use and very responsive...
I finished the coating the speaker stands in about 1 minute from start to finish. :D. gave me a wet coat as I wanted, was so happy I sprayed twice a certain portion almost twice and it sag... but that was operator fault. hehehe
the only drawback I find in this gun is you finish fast and you want to play with it more.... hahahaha
btw, I finished spraying in a single tank of compressed air, it was ON but didn't reach the starting cycle. so yes, it is a good gun for us with smallish compressors (by small I mean less than 5HP)...
Just think, how much nicer this would be if I used oil or laquer based finish... water based pa lang ganda na gamitin...
click my signature and it will take you there........
Re: Asturo WB Xtreme Master Kit Review
Its about time you got to use that! Im surprised it ran on a single tank of air. That really must be LVLP. Now i know what gun to get when i upgrade my comp in the future.
Did you get to use the viscosity cup? How many seconds for the water base? And what tip set did you use?
Re: Asturo WB Xtreme Master Kit Review
Its about time you got to use that! Im surprised it ran on a single tank of air. That really must be LVLP. Now i know what gun to get when i upgrade my comp in the future.
Did you get to use the viscosity cup? How many seconds for the water base? And what tip set did you use?
haven't tried the VC, I just used the poly straight from the can with a 1.5mm tip. Yes, I was kinda stumped at first when the compressor did not run thinking the switch must have been OFF... during clean-up and sprayed water to clean the gun it ran 😀
it is a great gun Moji, I would recommend it highly... thinking of getting the 1.3mm tip, but having second thoughts... might get the 1.3mm gun instead... lol
click my signature and it will take you there........
Re: Asturo WB Xtreme Master Kit Review
What is the 1.3 gun? Asturo also?
Re: Asturo WB Xtreme Master Kit Review
What is the 1.3 gun? Asturo also?
oo... 😀 😀
click my signature and it will take you there........
Re: Asturo WB Xtreme Master Kit Review
Timb what is the difference between Extreme and Standard package?
Which package did you get?
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Asturo WB Xtreme Master Kit Review
Timb what is the difference between Extreme and Standard package?
Which package did you get?
I got the Xtreme, HTE lang ang difference between the two which allows for even lower cfm requirements. HTE meaning High Transfer Efficiency...
click my signature and it will take you there........
Re: Asturo WB Xtreme Master Kit Review
How does it work? Is it a cap to install in the gun?
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Asturo WB Xtreme Master Kit Review
I haven't read the manual yet, but yes it has a cap marked for HTE use...
click my signature and it will take you there........
Re: Asturo WB Xtreme Master Kit Review
Can you share your shopping experience with spraygunworld.com? I've read some really bad reviews and is heistant to buy from them, thanks.
Re: Asturo WB Xtreme Master Kit Review
Can you share your shopping experience with spraygunworld.com? I've read some really bad reviews and is heistant to buy from them, thanks.
I did get this gun from them and it seems fine naman...
click my signature and it will take you there........
Re: Asturo WB Xtreme Master Kit Review
Timb,
Is the AOM / Asturo gun you got Made in Italy or Taiwan.
I'm currently in the market for a gun for base coat use. I have the Devilbiss Finsihline 3 Gun on my sight but am also checking out the Asturo.
I can now drive higher CFM guns but am intrigued by the high regards and review you gave the Asturo WB gun. It must be real good.
Thanks
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Asturo WB Xtreme Master Kit Review
Timb,
Is the AOM / Asturo gun you got Made in Italy or Taiwan.
I'm currently in the market for a gun for base coat use. I have the Devilbiss Finsihline 3 Gun on my sight but am also checking out the Asturo.
I can now drive higher CFM guns but am intrigued by the high regards and review you gave the Asturo WB gun. It must be real good.
Thanks
will check later Jay, gun is in the court if you decide to come over and check....
click my signature and it will take you there........
Re: Asturo WB Xtreme Master Kit Review
sir where to buy asturo WB extreme and how much?
Re: Asturo WB Xtreme Master Kit Review
We got out Asturo here: http://spraygunworld.com/
Pero buy at your own risk.
After placing our order, we realized how bad the reviews were for this site. Then, order got delayed so we were so worried. When it arrived pa sa forwarder, may isang nozzle na wala. So I emailed and complained.
They were nice enough to send me an extra one.
In the end, we got our order. And I ended up with an extra nozzle.
Apparently, this site's former owner scammed so many people. But since it changed hands, I think service improved a lot.
But this all came from researching what people had to say about the site.
As I said, caveat emptor.
