Forum

Share:
Notifications
Clear all

Powder Coating a S/S Tube: Is it possible?

9 Posts
4 Users
0 Reactions
79 Views
woodworkboy
(@woodworkboy)
Posts: 95
Trusted Member
Topic starter
 

Magandang Hapon mga Masters, gusto ko sana malaman kung posibleng bang i-powder coat ang loob ng S/S Tube na may diameter na 8 inches. Kung hindi naman posible po, may mairerekomenda po ba kayong technique para makulayan ko yung loob ng tube na kasi ganda ng powder coating finish?

Salamat po.

 
Posted : 20/04/2012 4:54 pm
(@balarila)
Posts: 1368
Noble Member
 

Re: Powder Coating a S/S Tube: Is it possible?

It may help if you could give us an idea what you will use this tube for.
Posted via PHM Mobile

 
Posted : 20/04/2012 10:37 pm
woodworkboy
(@woodworkboy)
Posts: 95
Trusted Member
Topic starter
 

Re: Powder Coating a S/S Tube: Is it possible?

It may help if you could give us an idea what you will use this tube for.
Posted via PHM Mobile

Good evening, Sir!

S/S tube will be used as a Floor Lamp casing.
8 inches diameter 6 feet high and the tube will have some pattern (thru CNC Punching and cutting)
i want it to have a two tone (white for the interior and another color for exterior)
outside color is possible thru powder coating. So, is it possible or do you happen to know any technique or process to paint the inside with the same quality as og the powder coating.

Back Story:
I actually designed the floor lamp using Plexiglass Tube. Problem arised when i had it quoted from a German company but they dont accept small order on special requirement such as two-tone tube. So i decided to use S/S instead.

Thank you for replying.

Last thing, this is merely a personal (use) project. ;);)

 
Posted : 21/04/2012 11:41 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: Powder Coating a S/S Tube: Is it possible?

Look up republic powder coating, ibeleive theyareinthe best position to answer your inquiry. They are online or yellow pages and have several shops, you can choose one near you.
Posted via PHM Mobile


click my signature and it will take you there........

 
Posted : 22/04/2012 4:45 am
bmac
 bmac
(@bmac)
Posts: 114
Estimable Member
 

Re: Powder Coating a S/S Tube: Is it possible?

why use S/S, when you can use an ordinary metal sheet such GI metal sheet. Since you will have it powder coated.

I call that overdesign.

 
Posted : 23/04/2012 6:07 am
woodworkboy
(@woodworkboy)
Posts: 95
Trusted Member
Topic starter
 

Re: Powder Coating a S/S Tube: Is it possible?

Look up republic powder coating, ibeleive theyareinthe best position to answer your inquiry. They are online or yellow pages and have several shops, you can choose one near you.
Posted via PHM Mobile

@balarila, i have talked to them already. sad thing was hindi daw kaya pasukin sa loob unless malaki yung diameter. :thanks: anyway.

 
Posted : 24/04/2012 12:24 pm
woodworkboy
(@woodworkboy)
Posts: 95
Trusted Member
Topic starter
 

Re: Powder Coating a S/S Tube: Is it possible?

why use S/S, when you can use an ordinary metal sheet such GI metal sheet. Since you will have it powder coated.

I call that overdesign.

Every metalworking fabricator knows that. Of course, everyone can use GI sheet but can you fabricate me a seamless tube (8inches diameter) with accurate circumference?

it's not overdesign, you rather call me an OC one. 😀

 
Posted : 24/04/2012 12:30 pm
bmac
 bmac
(@bmac)
Posts: 114
Estimable Member
 

Re: Powder Coating a S/S Tube: Is it possible?

Are you sure seamless tube? accurate circumference is possible.

 
Posted : 24/04/2012 4:23 pm
woodworkboy
(@woodworkboy)
Posts: 95
Trusted Member
Topic starter
 

Re: Powder Coating a S/S Tube: Is it possible?

yes! i need the seamless one! accurate circumference is possible but i dont know anyone who can do it.

Are you sure seamless tube? accurate circumference is possible.

 
Posted : 10/05/2012 12:59 pm
Share: