if the admin of the site will going to add metalworks etc, hoping they will add this too hehe for one time editing 😀
its only a suggestion 🙂
[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!
Re: PLASTICWORKS (kaplastican) and the likes thread?
Is molding/pouring plastic (e.g., polyethylene) into 3D shapes within the budget/capabillity of most DIYers, or are DIYers limited only to what can be done with sheet plastic (e.g., cut and bend acrylic glass, polycarbonate, PVC)?
Re: PLASTICWORKS (kaplastican) and the likes thread?
glass-reinforced plastic which also called as fiberglass - we can do a lot more as long as its doable. fiberglassing materials are available almost everywhere in the Philipiines.
[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!
Re: PLASTICWORKS (kaplastican) and the likes thread?
I buy Fiberglass supplies from Polymer Products Inc.. EDSA, Taft.
Anyway, since the topic is plastic, I used to bond acrylic using chloroform. but now I have no known sources for that. In Binondo the sell a plastic bonding element almost like it, but with a lesser odor..
Re: PLASTICWORKS (kaplastican) and the likes thread?
what can I use to bond 2 FRP pieces together? will Black Cement work as it claims? TIA.
Safety first - always wear face/eye/ear/hand protection as a minimum.
Re: PLASTICWORKS (kaplastican) and the likes thread?
lets continue this thread.
these are the center caps that i produced from fiberglass
this is the original
this is the mold
sorry, no wips. the mold was made from silicon and i used plaster as a backing to minimize costs. the reproduced center cap was made from 3 layers of 300 gsm chopped strand laminated with polyester resin. i had it finished by a professional painter because i don't know how to spray paint. i made this because my girlfriend's dad can't find replacements of the original. syempre pasikat ako. haha
Re: PLASTICWORKS (kaplastican) and the likes thread?
@crazyboi,
ang galing naman, pa post namang ng WIP hehe
inayawan ko na yan fiberglassing, hindi ko kinaya, Hindi ako tinantanan ng kati hehe
@clay, or kung sino may gusto
i have here fiber strands and fiber mat (2 kilo yata) ibigay ko na lang sa inyo, hindi ko na din kasi gagamitin, sayang naman kasi...bacoor area po ako...thanks
[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!
Re: PLASTICWORKS (kaplastican) and the likes thread?
ossie,
sorry no wips. you can ask me anything about it. but i'm no expert. yung kati, sanayan lang lang daw. ako kasi hindi kinakati eh. makapal ata balat ko. hahaha anyway, all materials were bought from polymer prod. (clay, resin, glass and rtv rubber/silicone. two parts ang mold na ginamit ko para sandwich yung fiberglass after lamination. mahirap kasi kung isang mold lang. maraming bubbles and hindi makukuha yung details.
Re: PLASTICWORKS (kaplastican) and the likes thread?
hahaha i attended Basic Course on Polyester Resin at Polymer Producs Phil Inc @ Pasig City, then nung nasa bahay na ako gumagawa na ng seryosohan, makati at ang kalat ng fiber hehehe kaya ayaw ko na 🙁
[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!
Re: PLASTICWORKS (kaplastican) and the likes thread?
sayang,
daming possibilities with fiberglass. thats really my focus. pero gusto ko na rin ng woodworking, naingit na ako sa inyo. i also need woodworking for fiberglass molds. pag medyo experienced na, i'd like to build a boat.
Re: PLASTICWORKS (kaplastican) and the likes thread?
gagawa sana nga ako ng mouldings using fiberglass, yun yung dahilan kaya ako ng attend ng training sa Polymer hehe
[COLOR="Blue"]Putting two pieces of metal together so they stay together - Bigote
[COLOR="DarkOrange"]Use the right tool for the right job!
Re: PLASTICWORKS (kaplastican) and the likes thread?
ok yun. i also took that course. beth, the teaching assistant/chemist was so helpful. she patiently answered my questions.
baka this might give you more ideas on your project.
http://www.youtube.com/user/MegaPlot#p/u/3/ErMDHF1xCOoc
and this
http://www.youtube.com/watch?v=Hk4de5aNK6E
sir, baka naman pwede nyo list yung parts that you used for your acylic bender and where you sourced them? (power supply and heating element) salamat
Re: PLASTICWORKS (kaplastican) and the likes thread?
ok yun. i also took that course. beth, the teaching assistant/chemist was so helpful. she patiently answered my questions.
baka this might give you more ideas on your project.
http://www.youtube.com/user/MegaPlot#p/u/3/ErMDHF1xCOoc
and this
http://www.youtube.com/watch?v=Hk4de5aNK6E
sir, baka naman pwede nyo list yung parts that you used for your acylic bender and where you sourced them? (power supply and heating element) salamat
Sir, ano bang acrylic binibend nyo? sheet or tubing? heat gun pwede sa sheet and tubing. yung tubing i usually fill the tube with sand bago ko ibend.
