Forum

Share:
Notifications
Clear all

Bargain Alerts

174 Posts
28 Users
0 Reactions
806 Views
timber715
(@timber715)
Posts: 5424
Member
 

Re: Bargain Alerts

for those with online purchases, Hitachi is out to sell... main page: http://www.amazon.com/Hitachi-KM12VC-4-Horsepower-Variable-Collets/dp/B0002ZZWX8/ref=pd_cp_hi_2

sweet router deal, comes to about 6.5K pesos
http://www.amazon.com/Hitachi-KM12VC-4-Horsepower-Variable-Collets/dp/B0002ZZWX8/ref=pd_cp_hi_2


click my signature and it will take you there........

 
Posted : 15/06/2009 4:12 pm
(@koykoy)
Posts: 63
Trusted Member
 

Re: Bargain Alerts

i spent two days just browsing at the low prices at sulit for power tools. i am from cebu and surplus tools are not as abundant here.

i have already paid for an 18v ozito cordless drill for 1,100 + shipping. hope it will be shipped. hehe and hope it will work. these tools are actually in their manufacturer's website so we can check their specs first.

let me try this first and build up the trust between the seller. maybe someday ill be buying a CMS, thicknesser, etc. hope it wont be on fire. hehe

 
Posted : 18/06/2009 2:44 pm
(@koykoy)
Posts: 63
Trusted Member
 

Re: Bargain Alerts

Hey that's a pretty good killing! Maybe someone would like to buy my mine too since I actually don't use it much anymore. Normally I use a 10" sliding compound miter saw, or SCMS as you would put it. Consider getting a SCMS as these can handle much wider materials than those that do not slide.

ADDED:

I found a picture of the saw.

hi lncc. are you selling still your CMS? I might need one for installation of our crown moldings. 🙂

 
Posted : 18/06/2009 3:09 pm
bbn
 bbn
(@bbn)
Posts: 904
Prominent Member
Topic starter
 

Re: Bargain Alerts

hi lncc. are you selling still your CMS? I might need one for installation of our crown moldings. 🙂

Well I still have the saw. What are crown moldings?

 
Posted : 18/06/2009 4:37 pm
(@koykoy)
Posts: 63
Trusted Member
 

Re: Bargain Alerts

ung molding po na inilagay between the beam and the ceiling.

so, how much are you selling the CMS?

 
Posted : 19/06/2009 6:30 am
bbn
 bbn
(@bbn)
Posts: 904
Prominent Member
Topic starter
 

Re: Bargain Alerts

Oh ok. I know them as cornices or "kornisa". You can have it for 2k but you have to pick it up at my house or at my office. If do pick it up at my office in Ortigas Center we won't be able to test it but I'll test it before hand for sure.

 
Posted : 19/06/2009 9:42 am
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Bargain Alerts

for those with online purchases, Hitachi is out to sell... main page: http://www.amazon.com/Hitachi-KM12VC-4-Horsepower-Variable-Collets/dp/B0002ZZWX8/ref=pd_cp_hi_2

sweet router deal, comes to about 6.5K pesos
http://www.amazon.com/Hitachi-KM12VC-4-Horsepower-Variable-Collets/dp/B0002ZZWX8/ref=pd_cp_hi_2

The price just shot up to $160 or roughly 8k pesos as of this post.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 19/06/2009 11:26 am
bbn
 bbn
(@bbn)
Posts: 904
Prominent Member
Topic starter
 

Re: Bargain Alerts

Bros, there is a Hitachi distributor here and they seem to be making a go into the consumer market. Last week I saw some Hitachi tools on sale at DIY. The router wasn't there but maybe, just maybe, if you call the local distributor, I'll have one with a good price.

What I saw at DIY was an angle grinder but it was MIC. I'm still planning to get a Makita since I use it often and sometimes quite heavily. Also, I prefer tools that don't look like a rubber shoe.

 
Posted : 19/06/2009 12:17 pm
(@koykoy)
Posts: 63
Trusted Member
 

Re: Bargain Alerts

Oh ok. I know them as cornices or "kornisa". You can have it for 2k but you have to pick it up at my house or at my office. If do pick it up at my office in Ortigas Center we won't be able to test it but I'll test it before hand for sure.

2k is not bad considering it still looks nice (im basing the picture above)

ahmmm... i am from cebu eh. pwede naman cguro nating ipa LBC.

i just received ung inorder ko sa sulit na 18V Ozito drill this morning. these australian tools are really good ah for the price.

 
Posted : 19/06/2009 4:49 pm
bbn
 bbn
(@bbn)
Posts: 904
Prominent Member
Topic starter
 

Re: Bargain Alerts

Sorry Bro but that's what it looked like when it was new. I'll take a picture and post it so you know what you're buying. Hmmm ... Cebu? You might just want to look for one over there. I suspect you'll spend more than P500 having it shipped.

 
Posted : 19/06/2009 5:37 pm
(@fourtheboys96)
Posts: 299
Reputable Member
 

Re: Bargain Alerts

pardon my ignorance, but can a miter saw be use to cut metals like angle bars etc? maybe by changing the blade?

 
Posted : 19/06/2009 10:13 pm
bbn
 bbn
(@bbn)
Posts: 904
Prominent Member
Topic starter
 

Re: Bargain Alerts

I know the aluminum shops use them yes by changing the blades. Steel I don't know. I have a cutoff saw for that. Most machine shops I believe use a power hacksaw or a bandsaw. Best would be to find an appropriate blade. I'll try to not forget to ask at the industrial supply when I go.

 
Posted : 19/06/2009 10:32 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Bargain Alerts

pardon my ignorance, but can a miter saw be use to cut metals like angle bars etc? maybe by changing the blade?

Probably if its aluminum then its ok provided the proper blade is used. I'm thinking about this too and a blade such as this.

http://www.amazon.com/D1080N-Diablo-10-Inch-Non-Ferrous-PermaShield/dp/B00008WQ38/ref=pd_bxgy_hi_text_b

I also found a Bosch Blade ( locally) that can cut like this for around 1,600 pesos. However I am not sure about the performance since I have not tried it yet.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 20/06/2009 2:33 am
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Bargain Alerts

Also, I prefer tools that don't look like a rubber shoe.

Hahahaha . Would you believe this is the reason why I shied away from Hitachi products.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 20/06/2009 2:37 am
bbn
 bbn
(@bbn)
Posts: 904
Prominent Member
Topic starter
 

Re: Bargain Alerts

For those looking for tools and are comfortable with surplus and repairing tools, you might want to check this out: http://www.sulit.com.ph/index.php/view+classifieds/id/1409749/sash+woodworking+equipment . The seller says they prefer it be sold as a lot but are also open to individual pieces or lots.

I've got dibs on the bandsaw 🙂 ... joke but that's what I'm interested in the most.

 
Posted : 06/08/2009 5:27 pm
Page 3 / 12
Share: