Forum

Share:
Notifications
Clear all

Bargain Alerts

174 Posts
28 Users
0 Reactions
806 Views
bbn
 bbn
(@bbn)
Posts: 904
Prominent Member
Topic starter
 

Re: Bargain Alerts

I was there Timber at just before lunch and was shocked that there was virtually no parking slots. I had to park at the very top of the building! When I finally got in, I asked a guard why there were so many people and he said that "Rustan's" was having a sale.

I don't think though it is a mall-wide sale. Han's tools is certainly not part of the sale.

 
Posted : 05/05/2010 5:03 pm
(@beebeenator)
Posts: 1468
Noble Member
 

Re: Bargain Alerts

True Value was not hit by the fire. hence i dont think they will participate

Louis parang araw araw ka na nandiyan sa Hans ah.

 
Posted : 05/05/2010 5:28 pm
workbench
(@workbench)
Posts: 73
Trusted Member
 

Re: Bargain Alerts

Hi guys,

don't know if this is really a bargain, but I was at T. Alonzo during lunch today and I saw a contractors saw for 25k. Pretty solid construction with a cast iron top and extensions as well. 10 in blade with a 1 1/2 hp belt driven motor. Rip fence can cut up to 32" to the right of the blade. Anyone looking for one?

 
Posted : 05/05/2010 10:16 pm
bbn
 bbn
(@bbn)
Posts: 904
Prominent Member
Topic starter
 

Re: Bargain Alerts

Well it just fits within my 1 hour lunch break. From my office it takes about 15 minutes to get there and park. I park on the 7th level at the stairwell that leads right beside Han's. Han's is on the 6th level but parking that level is difficult. With a 30 minute transit time, I have 30 minutes to buy and browse. I just wish the cashier would not take so long. Today I bought only one item and I was the only one paying, and it still took her maybe 5 minutes which was enough take a peek at the Makita thicknesser, table saw and miter saw, as well as the jet thicknesser. I suppose if I paid with a credit card, I could even take a tool or two for a test drive :).

 
Posted : 05/05/2010 10:49 pm
(@beebeenator)
Posts: 1468
Noble Member
 

Re: Bargain Alerts

Rolly is looking for one. Go Rolly!

Does the saw have a miter slot?

Jet has a heavier duty saw than the jts 10 but it doesnt have a miter slot only a sliding table.

HEaps of jigs can me made with the miter slots.

 
Posted : 05/05/2010 10:49 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: Bargain Alerts

Hi guys,

don't know if this is really a bargain, but I was at T. Alonzo during lunch today and I saw a contractors saw for 25k. Pretty solid construction with a cast iron top and extensions as well. 10 in blade with a 1 1/2 hp belt driven motor. Rip fence can cut up to 32" to the right of the blade. Anyone looking for one?

I gotta go out and check it. been a while since I went there, not that I'm far from it... 🙂


click my signature and it will take you there........

 
Posted : 06/05/2010 12:10 am
(@rolly)
Posts: 164
Estimable Member
 

Re: Bargain Alerts

Rolly is looking for one. Go Rolly!

Does the saw have a miter slot?

Jet has a heavier duty saw than the jts 10 but it doesnt have a miter slot only a sliding table.

HEaps of jigs can me made with the miter slots.

what's the brand?

mukhang intay ko na lang stock ni panda ng jet, ung lang ang kaya ko ngayon. . . will also be getting kasi ung thicknesser ni jet. . . depende rin sa review ni bee, hehe

 
Posted : 06/05/2010 6:12 pm
workbench
(@workbench)
Posts: 73
Trusted Member
 

Re: Bargain Alerts

Sorry, forgot to mention that the TS has 2 miter slots. Brand is John Benzen, probably chiwanese made,

 
Posted : 06/05/2010 6:26 pm
(@beebeenator)
Posts: 1468
Noble Member
 

Re: Bargain Alerts

For a chiwanese to cost that much.. it must be reallyyyy solid

 
Posted : 06/05/2010 9:26 pm
workbench
(@workbench)
Posts: 73
Trusted Member
 

Re: Bargain Alerts

Yup, pretty solid. you can find it at Luzon Foundry on T. Alonzo on the street between Soler and Ongpin.

 
Posted : 06/05/2010 10:44 pm
(@beebeenator)
Posts: 1468
Noble Member
 

Re: Bargain Alerts

MAybe a store can consolidate all the stuff from ongpin and put it on a catalogue and that store can charge 5% extra. hahahaha

maybe pinoyhandyman can do something like that ( we need to assemble a team) and the 5% profit can go to the pinoyhandyman fund and could be used for webhosting expenses, seminars and etc.

but then this is only for people who loathe going to ongpin hahahah

 
Posted : 07/05/2010 8:23 am
workbench
(@workbench)
Posts: 73
Trusted Member
 

Re: Bargain Alerts

Guys,

Just saw an ad on Sulit.com - tool, generators and accesories section. A whole bunch of woodworking tools including 14" bandsaw, contractors saw, 20" planer, 8" jointer, compressors and dust collectors. Located lang nga in Mabalacat Pampanga. check it out.

 
Posted : 07/05/2010 1:47 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Bargain Alerts

Any links?

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 07/05/2010 2:11 pm
bbn
 bbn
(@bbn)
Posts: 904
Prominent Member
Topic starter
 

Re: Bargain Alerts

Looks like there are some good bargains. Here's the link: LINK

 
Posted : 07/05/2010 2:17 pm
 moji
(@moji)
Posts: 951
Prominent Member
 

Re: Bargain Alerts

I like that massive jointer..hehe Timber lagay natin sa bagong shop mo. Also that oscillating sander..Who is going hehe?

 
Posted : 07/05/2010 3:21 pm
Page 6 / 12
Share: