Forum

Share:
Notifications
Clear all

lawanit supplier (mdf board)

6 Posts
5 Users
0 Reactions
314 Views
(@jhoana)
Posts: 9
Active Member
Topic starter
 

hi guys! i'am a newbie here 🙂 i am looking for lawanit supplier in qc. i think they also call it mdf board. the ones available usually at the hardware storess are the standard lawanit na rough yung back. I need po the kind na smooth yung front and back surface and i need certain thickness of lawanit.
Please guys i will appreciate your help :thanks:

 
Posted : 14/09/2013 2:19 pm
(@joey81)
Posts: 1098
Member
 

Re: lawanit supplier (mdf board)

MDF is different from lawanit a.k.a. masonite.

I think what you're looking for is 1/4" thick MDF. MDF is available at Wilcon and Home Depot.

Saan available ang lawanit/masonite? Matagal na akong naghahanap nyan. Its no longer available at the hardware stores near our place.

Also, please introduce yourself in the Member Introductions forum.

Welcome to PHM!

 
Posted : 14/09/2013 2:43 pm
(@jhoana)
Posts: 9
Active Member
Topic starter
 

Re: lawanit supplier (mdf board)

hi sir joey 🙂 thanks for the welcome and for your quick reply 🙂 i thought mdf is the same as lawanit. What i really need is lawanit po , sizes thickness po nun are 3mm, 4.5 mm, 6mm and 12mm . Smooth surface of front and back. I have inquired na po at Wilcon stores , wala daw po silang ganun 🙁

 
Posted : 14/09/2013 3:04 pm
(@willyfernando)
Posts: 799
Prominent Member
 

Re: lawanit supplier (mdf board)

hi sir joey 🙂 thanks for the welcome and for your quick reply 🙂 i thought mdf is the same as lawanit. What i really need is lawanit po , sizes thickness po nun are 3mm, 4.5 mm, 6mm and 12mm . Smooth surface of front and back. I have inquired na po at Wilcon stores , wala daw po silang ganun 🙁

pagka alam ko 1 side smooth lang ang lawanit. mas mataas ang pulp(paper) content nya kaysa MDF. Would you kindly tell us what it is your intended application for it? tnx.

 
Posted : 15/09/2013 12:49 am
(@balarila)
Posts: 1368
Noble Member
 

Re: lawanit supplier (mdf board)

Lawanit is still available in local hardware shops around my place here in Antipolo. I guess provincial stores would still have them. I have two 4'x8' pieces which are 1/4" thick, I think. If you need just a small amount and you are in my area, you are welcome to cut off some.

But lawanit, ever since I knew them, are always rough on one side. If the thickness you need would allow, you can probably glue them back to back to have both sides smooth.

In another post, I see you are looking for a way to come up with a curved book spine. Is this lawanit for that purpose?

Also, why lawanit?

 
Posted : 15/09/2013 7:01 am
rosy
 rosy
(@rosy)
Posts: 4307
Member
 

Re: lawanit supplier (mdf board)

Hi jhoana,

As joey81 said, lawanit panels are very much different from the MDF boards. And I am not sure if there are lawanit panels that are sold with thickness of 12mm, oh how I wish there are. In the provinces of Rizal, Lawanit panels are very much available in almost all neighborhood hardware stores but only at 1/8" or 3/16" to 1/4" of an inch thick. I use this type of panels too for my painting surfaces in substitute of canvas. The thicker ones seems to be very rare in the market and these types are already called tempered masonites.

CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw

 
Posted : 15/09/2013 11:40 am
Share: