Newbie here!
May ma recommend ba kayo na plywood machine cutting service near Pasig or Cainta area?
Will be buying plywoods and have it machine cut sana according to my requirements. since matagal pag manual lagare, hanap sana ko ng machine cutting service.
Re: LF: Plywood Cutter Service
I can't recommend a cutting service but maybe you want t check this other solution too if you have that many plywood to cut.
1. DIY pair of Saw Horse
2. Circular Saw
3. DIY circular saw cutting sled made from 1/2" MDF plywood
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: LF: Plywood Cutter Service
I agree with Jay. Investing in a circular saw might be the best route. Its not a specialty equipment so you can use it for many other things.
How many boards are you going to cut? What dimensions? Where is your location?
Re: LF: Plywood Cutter Service
thanks for the reply. have about 4 to 5 sets of 3/4 plywood that i will use to construct computer office tables which will be laminated after. cut needs to be precise. since i will only be doing this once, i don't think i'll be investing on buying tools
Re: LF: Plywood Cutter Service
thanks for the reply. have about 4 to 5 sets of 3/4 plywood that i will use to construct computer office tables which will be laminated after. cut needs to be precise. since i will only be doing this once, i don't think i'll be investing on buying tools
If you can't find a place to do cuts using power tools then I reckon that a good quality sharp hand saw will work just as well albeit a bit more slowly. I've seen good carpenters cut straight and true using hand saws. Besides it's only 4 or 5 sets.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: LF: Plywood Cutter Service
iba ang table saw precision. diretso ang assembly vs hand tools, esp kung 4x8. hand cut requires pitik and katam after, and the boards size and squareness varies a bit. pag machine cut diretso assembly.
Posted via PHM Mobile
Re: LF: Plywood Cutter Service
i'd try a good sash works. show them the cut list and map of the 4x8 cuts. tapos pa quote ka. i outsourced my precision wood work for my renovation work. sulit in the long run for me.
Posted via PHM Mobile
Re: LF: Plywood Cutter Service
i'd try a good sash works. show them the cut list and map of the 4x8 cuts. tapos pa quote ka. i outsourced my precision wood work for my renovation work. sulit in the long run for me.
Posted via PHM Mobile
Sir, pwedeng pa-PM nung contact mong sash works? Magpapagawa din kasi ako ng mga new cabinets and shelves para sa llipatan long bahay. Pero balak ko plyboard lang for the body na walang edging, masilya, liha lang, then paint na. Iyong mga doors, baka magpacustomize na lang ako.
Iyong present house kasi namin sa Camella Homes, may kasama ng cabinets. Puro plyboard na walang edging ang ginamit. 24 years na kami dito, puro buo pa din. Matibay naman.
Meron na din akong ipe-prep na cut list. Siguro around 15 pcs ng 3/4-in plyboard ang magagamit ko.
TIA.
Re: LF: Plywood Cutter Service
@zepol,
haven't logged in for a long time. thanks for the reply. My dad bought a circular saw on the time i was inquiring here. but then, our carpenter is not used to using this. wasted a few cuts pero naremedyuhan naman. he went back to the old school manual wood saw 🙂 and he's good at it, matagal nga lang.
thanks for the reply again
