Re: dewalt Plunge saw DC351KL, 28v Cordless

@ F

Track saw .... a beast of a tool in it's own right.

BTW How many tracks and what lengths did you get?

Nice pictures bro ... thanks for sharing.

Re: dewalt Plunge saw DC351KL, 28v Cordless

The disadvantage of this plunge saw is: I need 2 more batteries in order not to stop working and wait for the spare batt to be fully charge. it just take an hour to fully charge the battery but it takes only 30mins or less to use & drain the batt especially ripping of boards.

I'll better get the corded one next time!!! BOSCH GKT55GCE sana dumating ka na !!!!...

BTW, I have a Rear Plunging Track saw.... COMING SOON!!!!!!!!!!!!!!

Re: dewalt Plunge saw DC351KL, 28v Cordless

@ F

Track saw .... a beast of a tool in it's own right.

BTW How many tracks and what lengths did you get?

Nice pictures bro ... thanks for sharing.

i have two guide rail jayL , 46" and 59" its long enough when joined together for ripping full sheets.

Re: dewalt Plunge saw DC351KL, 28v Cordless

The disadvantage of this plunge saw is: I need 2 more batteries in order not to stop working and wait for the spare batt to be fully charge. it just take an hour to fully charge the battery but it takes only 30mins or less to use & drain the batt especially ripping of boards.

I'll better get the corded one next time!!! BOSCH GKT55GCE sana dumating ka na !!!!...

BTW, I have a Rear Plunging Track saw.... COMING SOON!!!!!!!!!!!!!!

Fort, addict ka rin sa tools no? :biggrin:
Pero ok lang, karamihan naman sa atin ganun din eh :naughty2:

Re: dewalt Plunge saw DC351KL, 28v Cordless

Fort, addict ka rin sa tools no? :biggrin:
Pero ok lang, karamihan naman sa atin ganun din eh :naughty2:

Hahahhahha .... LOL 🙂

Re: dewalt Plunge saw DC351KL, 28v Cordless

Fort, addict ka rin sa tools no? :biggrin:
Pero ok lang, karamihan naman sa atin ganun din eh :naughty2:

Hahahhahha .... LOL 🙂

Tool addicts of the Philippines .... Unite.

Re: dewalt Plunge saw DC351KL, 28v Cordless

Fort, addict ka rin sa tools no? :biggrin:
Pero ok lang, karamihan naman sa atin ganun din eh :naughty2:

hahaha ganon na nga cguro!!!!!!!!!!!

buti na lang wala akong mapaglagyan sa liit ng bahay ko hehehehe. wla na akong mapaglagyan na hindi visible ni SWMBO. hehehe

The disadvantage of this plunge saw is: I need 2 more batteries in order not to stop working and wait for the spare batt to be fully charge. it just take an hour to fully charge the battery but it takes only 30mins or less to use & drain the batt especially ripping of boards.

I'll better get the corded one next time!!! BOSCH GKT55GCE sana dumating ka na !!!!...

BTW, I have a Rear Plunging Track saw.... COMING SOON!!!!!!!!!!!!!!

Hi bro kamusta? Care to share how much would this Bosch gkt55gce be together with the rail to accommodate 8' cuts? Thanks in advance
Posted via PHM Mobile

Re: dewalt Plunge saw DC351KL, 28v Cordless

@jay,

a DIY track saw can be done bro...only when i find suitable materials...hehe...

@fort,

me riving knife na pla yan!

how about the noise bro? tancha ko, less noisy since nakahouse yung blade...

and what is good me dust port pa...

kaya lang...parang bitin talaga power pala kahit na 28 volt na..iba talaga siguro pag corded nga...there is no stopping.

Re: dewalt Plunge saw DC351KL, 28v Cordless

trimming the anti chip strip
Test cut.
had a smooth cut under the anti chip edge.

fortnapz,

What is 'anti chip strip' ... were you making a sawboard for use with the track? Isn't the track already acting like sawboard, i.e., zero clearance guide on one side of the blade?

I'm wondering how to design a track that is (and whether any of the commercial tracks are) not only sawboard but also zero clearance on both sides of blade.

Did you get the clamps to go with track? Or is friction enough.

I got the clamps but not the track! Supposedly (?) these work with DeWalt, Festool, and Makita tracks. (No intention of getting track ... just needed the shape of the clamp for other uses.)

Re: dewalt Plunge saw DC351KL, 28v Cordless

Hi bro kamusta? Care to share how much would this Bosch gkt55gce be together with the rail to accommodate 8' cuts? Thanks in advance
Posted via PHM Mobile

bro, sa europe pa available [COLOR="Red"]ito.wla pa ako nito. hehehe.pero gustong gusto kong magkaroon nito.. BTW hindi ito ang sinasabi kong rear plunging tracksaw ko.

@ V,
yup tama ka doc. tahimik nga ito kumpara sa mga corded na regular circular saw ko parang harmless kung umandar hehehe. kaya lang bitin nga kung marami kang i-cut.

@ guad
What is 'anti chip strip' ... were you making a sawboard for use with the track? Isn't the track already acting like sawboard, i.e., zero clearance guide on one side of the blade? [COLOR="Blue"]YES, its a Rubber strip which has a zero clearance on the blade.

I'm wondering how to design a track that is (and whether any of the commercial tracks are) not only sawboard but also zero clearance on both sides of blade.
[COLOR="blue"]Festool, Mafell and Bosch Plunge saw had a features of zero clearance that make your cuts w/o chip on both sides.

Did you get the clamps to go with track? Or is friction enough.

I got the clamps but not the track! Supposedly (?) these work with DeWalt, Festool, and Makita tracks. (No intention of getting track ... just needed the shape of the clamp for other uses.)
[COLOR="blue"]I don't have that clamp. but with my experience in cutting sheet board, the grip of the anti slip beneath the rail is enough to hold the track in place.

Re: dewalt Plunge saw DC351KL, 28v Cordless

Ok din sana sa Europe mag order kasi 240v na kaya Lang sobrang mahal.
Posted via PHM Mobile