Forum

Hilti TE-60 Combiha...
 
Share:
Notifications
Clear all

Hilti TE-60 Combihammer

11 Posts
7 Users
0 Reactions
105 Views
(@bryant77)
Posts: 480
Reputable Member
Topic starter
 

I have this old Hilti TE-60 Combihammer during on-site action it lost the hammering action but it's still working. I asked Hilti Phils they told me that the tool is already phase-out. They offering to trade my tool to their demolition hammer TE 500 X Breaker + cash out of P30,000.

Since nothing to loose I decided to open the TE-60 and found out :

1. It runs using an oil and is already drain causing to loose the hammer
2. it has a piston with o-ring that pushes the hammering rod and lots of O-ring to seal the tool.
3. It's hard to disassemble if you don't have a service manual. Lot of trial & error.

I'm on the process of re-building and needed the following:
1. Various sizes of O-ring. Where is the place to go???
2. Hilti Oil or substitute oil preferably hydraulic oil AW46!?

I hope you guys can help me put this tool back in action.

 
Posted : 02/12/2010 10:37 am
(@importer405)
Posts: 13
Active Member
 

Re: Hilti TE-60 Combihammer

I have this old Hilti TE-60 Combihammer during on-site action it lost the hammering action but it's still working. I asked Hilti Phils they told me that the tool is already phase-out. They offering to trade my tool to their demolition hammer TE 500 X Breaker + cash out of P30,000.

Since nothing to loose I decided to open the TE-60 and found out :

1. It runs using an oil and is already drain causing to loose the hammer
2. it has a piston with o-ring that pushes the hammering rod and lots of O-ring to seal the tool.
3. It's hard to disassemble if you don't have a service manual. Lot of trial & error.

I'm on the process of re-building and needed the following:
1. Various sizes of O-ring. Where is the place to go???
2. Hilti Oil or substitute oil preferably hydraulic oil AW46!?

I hope you guys can help me put this tool back in action.

Try Simplex along Benavidez Street.

 
Posted : 02/12/2010 11:01 am
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Hilti TE-60 Combihammer

This is the first time I'm seeing a hand drill running it's hammer action using hydraulics. Looks like a very high quality tool and I hope you fix it.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 02/12/2010 11:37 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Hilti TE-60 Combihammer

Hilti eh hehe.

lets cross our fingers the hammer will work again.

hmmmm...looks like you are going to demolish somebody else's house!
:p

The devil will find work for idle hands to do.-Morrissey

 
Posted : 02/12/2010 11:50 am
timber715
(@timber715)
Posts: 5424
Member
 

Re: Hilti TE-60 Combihammer

Try Simplex along Benavidez Street.

Perfect choice.... Simplex carries a good line of O-rings and you can find the oil you need there as well...


click my signature and it will take you there........

 
Posted : 02/12/2010 12:05 pm
(@bryant77)
Posts: 480
Reputable Member
Topic starter
 

Re: Hilti TE-60 Combihammer

Perfect choice.... Simplex carries a good line of O-rings and you can find the oil you need there as well...

Here are the O-ring i will be needing.

 
Posted : 02/12/2010 2:48 pm
(@bryant77)
Posts: 480
Reputable Member
Topic starter
 

Re: Hilti TE-60 Combihammer

This is the first time I'm seeing a hand drill running it's hammer action using hydraulics. Looks like a very high quality tool and I hope you fix it.

" It runs using an oil and is already drain causing to loose the hammer".

I want to correct my post.

I researched on the web the Hilti TE-60 uses only 70ml of Hydraulic Oil so it means just enough to lubricate the gears, piston & internal parts. More than the recommended oil may caused to break the gears & piston. The hammering action is produced by compressing the air on the chamber and thus pushing the hammering rod. Same principle with other chipping/rotary hammer.

 
Posted : 03/12/2010 10:21 pm
(@bryant77)
Posts: 480
Reputable Member
Topic starter
 

Re: Hilti TE-60 Combihammer

Good thing I downloaded a part list from HILTI Website. I was able to get the sizes of O-rings & bearings I needed.

Tnx to Importer405 for the tips where to buy. Shop from Benavidez has those sizes I need. I spend P1.1K for the sets O-rings & bearings.

 
Posted : 03/12/2010 10:59 pm
(@spyghost)
Posts: 321
Reputable Member
 

Re: Hilti TE-60 Combihammer

For O-rings and seals simplex is the place to go...

 
Posted : 04/12/2010 9:09 am
(@bryant77)
Posts: 480
Reputable Member
Topic starter
 

Re: Hilti TE-60 Combihammer

For O-rings and seals simplex is the place to go...

Yup, there where I got my O-rings.

 
Posted : 04/12/2010 9:49 am
(@jnl1105)
Posts: 1
New Member
 

Anyone have a copy of the parts manual for this unit as mine died, i need to see it so i can get the correct parts and also so i can figure out how to disassemble it

 
Posted : 06/02/2016 2:29 am
Share: