first is the Grozl Quick Action Clamps... 2 and 3 footers available. Approx 1.5k and 2k respectively which is pretty decent compared to buying them and shipping them from the US.... Groz 24"
The rail is made from special #K# section steel profiled to minimize flexing & bending. The steel rails have serrations that engage with a hardened steel insert in the moving jaw to eliminate slippage. Four hardened rollers in the moving head maintained a constant 90 angle under load, ensuring that the clamp heads remain parallel to each other & at right angles to the rail at all time. The clamp jaw are encased in non-marring, glue resistant polypropylene casing.
click my signature and it will take you there........
Re: New Locally available products
For the metal workers, a ig for working, twisting, bending and shaping metal is now here cheap (compared to the german ones)... 18K approximately
click my signature and it will take you there........
Re: New Locally available products
This one I think Jay should have soon, Tube notcher jig. works with a drill/drill press with a 1/2" chuck capacity (so I was told) and holds the tube and holesaw to guide the cut (approx 3K)... IIRC holesaws not included.
click my signature and it will take you there........
Re: New Locally available products
@timber,
thanks for posting and visiting panda.
at least i have an alternative to rockler, bessey or irwin framing clamps.
how much each?
thanks
The devil will find work for idle hands to do.-Morrissey
Re: New Locally available products
^1.5 and 2K daw V:)
first is the Grozl Quick Action Clamps... 2 and 3 footers available. Approx 1.5k and 2k respectively
Re: New Locally available products
first is the Grozl Quick Action Clamps... 2 and 3 footers available. Approx 1.5k and 2k respectively which is pretty decent compared to buying them and shipping them from the US.... Groz 24"
The rail is made from special #K# section steel profiled to minimize flexing & bending. The steel rails have serrations that engage with a hardened steel insert in the moving jaw to eliminate slippage. Four hardened rollers in the moving head maintained a constant 90 angle under load, ensuring that the clamp heads remain parallel to each other & at right angles to the rail at all time. The clamp jaw are encased in non-marring, glue resistant polypropylene casing.
^ sir saang shop po ito?
Re: New Locally available products
^ sir saang shop po ito?
Sa Panda Construction Supply sa Binondo. Meron din sa Araneta ave. Q.C.
click my signature and it will take you there........
Re: New Locally available products
I've seen those Groz ... heavy and not cheesy.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: New Locally available products
This one I think Jay should have soon, Tube notcher jig. works with a drill/drill press with a 1/2" chuck capacity (so I was told) and holds the tube and holesaw to guide the cut (approx 3K)... IIRC holesaws not included.
Maybe a manual will help us understand this jig a bit more. Will check it out when I go to Panda.
Looks similar to this one http://www.vansantent.com/tube_notcher.htm
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: New Locally available products
the clamps looks like a good deal
may visit panda araneta this week and grab a few, I may start making a proper solid wood top workbench... maybe