Re: Show your recent tool purchase/s ( The Tool/s Loot )

This thread is not going to be good, I can feel it. 😀

Re: Show your recent tool purchase/s ( The Tool/s Loot )

pwede ko ba ipost ang ozito ko? 😀

Re: Show your recent tool purchase/s ( The Tool/s Loot )

pwede ko ba ipost ang ozito ko? 😀

Sure you can, as long as the intention is to post YOUR (recently purchased) tool/loot and not use this thread as a way of advertizing your items for sale. :mellow:

Re: Show your recent tool purchase/s ( The Tool/s Loot )

i got it while i was in the states recently, was supposedly going to use it for the Urn, but apparently i didnt need to, so anyway finally got a plunge router. I tried the Skill plunge router in home depot, there is play from the time you set the depth to the time you fasten the metal lock (for the fixed base ) so i decided on the BOsch instead

EZ pro dovetailer 860

Cheap dovetailer jig which worked like a charm, i used it for the joint of the box of the Urn, did a half blind dovetail joint, i didnt have the luxury of waiting for miter spline joint GLUE to dry so having a half blind dovetail with glue , even without waiting for the glue to dry, it doesnt even budge.

it can also make dovetail panel joints, box joints and supposedly through dovetails.... it has an ingenious spacer tool, so you can literally have whatever length of board to be dovetailed and it really works. 35$ i got this for.

planning to get the EZ pro mortise and tenon jig, for 150$ and its SOLD OUT, its that popular, hopefully price wont sky rocket

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Nice loot, I got the same router kit myself. I only used it once for now. It will go under my RT.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Nice loot, I got the same router kit myself. I only used it once for now. It will go under my RT.

That makes 3 of us now. No doubt a good router kit. I'm very happy with mine.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

BFH ... 4 lbs

Re: Show your recent tool purchase/s ( The Tool/s Loot )

BFH .... 4 lbs

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Hahaha sige post nyo recent hauls nyo, pag nakita ni bossing patay tayo lol. My wife accompanied me sa site and ask Nya bago yan tool mo? Sabi ko review ko Lang.
Posted via PHM Mobile

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Thin Rip Jig

Double feather board upgrade & fence clamps ( need to make a higher fence )

Rip Blade

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Thin Rip Jig

Nice Thin rip jig JayL. You were asking in the chatbox if you can apply wax or WD40 to lubricate phenolic surface? You may also use TRAFFIC WAX by Johnson and Johnson. It's an oil film that dries to a wax layer once applied after a few minutes. They are a lot simpler and a lesser mess to use than paste wax and less runny than WD40. CAMEWELL MARKETING of Shaw Blvd in front of the Governors Place sells them for less than 900 per gallon. that should last a long time for your other tool conditioning.

 

Re: Show your recent tool purchase/s ( The Tool/s Loot )

@jay,

nice loot!

i thought the thin rip jig is just pocket sized..ang lapad pala...hehe

looks like you are going to rip some nice wood..

hassle talaga building panel doors for cabinets..the nominal thickness for locally available S4S planks are only around 12mm. very short of the thickness that the router bits demand for making panel doors...a lot of wasted material and money ripping 2 x 3 lumber.

sana ma realease na sa customs mga boxes ni timber...malapit na xmas..need to make some xmas presents...i have a few items still on hold in those boxes.

cheers anyway!

Re: Show your recent tool purchase/s ( The Tool/s Loot )

@jay,

nice loot!

i thought the thin rip jig is just pocket sized..ang lapad pala...hehe

looks like you are going to rip some nice wood..

hassle talaga building panel doors for cabinets..the nominal thickness for locally available S4S planks are only around 12mm. very short of the thickness that the router bits demand for making panel doors...a lot of wasted material and money ripping 2 x 3 lumber.

sana ma realease na sa customs mga boxes ni timber...malapit na xmas..need to make some xmas presents...i have a few items still on hold in those boxes.

cheers anyway!

V .... I think your boxes are out already. Timb is expecting deliveries anytime.

Would love to see you post the WIPs later.