Re: Show your recent tool purchase/s ( The Tool/s Loot )
sir, i lost the receipt but iirc just about P200 plus....
Thanks. I have one too but didn't know how much it cost. I got it as a freebie.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Show your recent tool purchase/s ( The Tool/s Loot )
Stanley tie rod fork (ACE) and a generic lever type tie rod separator tool.
tried it on when i replaced the ball joints of my truck. didn't know then that the lever type then was failing. didn't rely on the tool's pressure to remove the balljoint (hammered the knuckle also) but still it failed...looks like made of cast iron (hi carbon steel) aka "pundido" or "aserado?"
Brand new opening was 29/32 inch. after popping off 4 ball joints, the opening is now greater than 1-1/4 inch. the end was also flared. but still, it popped off the joints i need to remove.
Re: Show your recent tool purchase/s ( The Tool/s Loot )
How much for the Ace fork Mike?
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Show your recent tool purchase/s ( The Tool/s Loot )
How much for the Ace fork Mike?
P530 sir but still i wish i purchased at least one snap-on from you then. maybe next time.
Re: Show your recent tool purchase/s ( The Tool/s Loot )
P530 sir but still i wish i purchased at least one snap-on from you then. maybe next time.
I was thinking the same thing. The Snap On I posted is a bargain. I got these cheap so am selling cheap. You can pound all day and the tool's metal will hold.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Show your recent tool purchase/s ( The Tool/s Loot )
Stanley tie rod fork (ACE) and a generic lever type tie rod separator tool.
tried it on when i replaced the ball joints of my truck. didn't know then that the lever type then was failing. didn't rely on the tool's pressure to remove the balljoint (hammered the knuckle also) but still it failed...looks like made of cast iron (hi carbon steel) aka "pundido" or "aserado?"
Brand new opening was 29/32 inch. after popping off 4 ball joints, the opening is now greater than 1-1/4 inch. the end was also flared. but still, it popped off the joints i need to remove.
i have an unbranded ball joint separator tool (the one busted above) and so far it's still doing its job after a total of 6 ball joint separations. this one i got from hans tools several years ago worth 600. unlike the one above which is sort of carbonized the one i got is silver/metallic in color but not rusting.
Re: Show your recent tool purchase/s ( The Tool/s Loot )
Jon .... Congrats bro ....
Bro patingin naman pics nung sanding drum kit ba yun ... tks
here's the pics of the drum sanding kit...
with the sanding kit installed..
here's the link...
http://www.amazon.com/EXTRA-LONG-DRUM-SANDING-KIT/dp/B000H6BOXO/ref=pd_cp_hi_2
Re: Show your recent tool purchase/s ( The Tool/s Loot )
Thanks Bro Jon.
Let's see if these newer Asian made Wilton Drop Forged C Clamps ( 6 inches ) lives up to the Wilton name.
Forged Steel
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Show your recent tool purchase/s ( The Tool/s Loot )
@ miked
I'm sure that "pundido" in local lingo means cast (cast iron, cast bronze, etc.) Difficult to weld because it melts easily but i guess that's why it's easy to pour in a mold. It sure is brittle, complicated-ly shaped stuff like pulleys, the metal body of a pressure washer, cast iron cookware, c clamp bodies, and that stanley tool shown are pundido. It need not be brittle, rated at least to some PSI value before it breaks and there is the nodular/ductile variety but it isn't much used on DIY grade tools. I've had a cheap c clamp break on me too =).
Aserado i believe means steel that can be hardened through heat treatment. I'm aware acero is the spanish word for steel. If it is so, carbon steel (like grade 5 bolts) is one. Edge tools like saws, chisels are aserado.
I've heard the term used on anything that holds an edge like HSS hacksaw blades and drill bits too.
"Subo" i'm sure is if an aserado has gone through heat treatment and is in the hardened state. One can ruin the temper (the steel will soften)in a carbon steel tool if subjected to extreme heat though (to which High Speed Steel is impervious of.)
====
....natapos december nang hindi ako nakabalik sa panda. Don't have much WW clamps here...
Re: Show your recent tool purchase/s ( The Tool/s Loot )
[HTML]....natapos december nang hindi ako nakabalik sa panda. Don't have much WW clamps here...[/HTML]
...count me in too...
sana extended till january 31..:wootrock:
The devil will find work for idle hands to do.-Morrissey
Re: Show your recent tool purchase/s ( The Tool/s Loot )
[HTML]....natapos december nang hindi ako nakabalik sa panda. Don't have much WW clamps here...[/HTML]
...count me in too...
sana extended till january 31..:wootrock:
count me in three.
baka naman pwedeng yung supplier ang kulamin ni timber for a change. :wizard:
Re: Show your recent tool purchase/s ( The Tool/s Loot )
central forge pipe cutter
pipe bender
Re: Show your recent tool purchase/s ( The Tool/s Loot )
Re: Show your recent tool purchase/s ( The Tool/s Loot )
WOW bro spykersetter, hehehehe, pakitang gilas narin ha, metal worker na rin pala ha ?
GO GO GO GO NA, start working on a metal project and start posting WIPs na......LOL :thumbup: :bounceD: :chopper: :massbounce:
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Re: Show your recent tool purchase/s ( The Tool/s Loot )
@spykersetter, suki ka rin pala ng Harbor Freight.
How do you buy from them? Last time I tried they only accept US issued credit cards for online purchase.