Re: Show your recent tool purchase/s ( The Tool/s Loot )

I need abrasive media 14 grit or below to try this mini sand blaster. It is recommended to strain the media too through a fine screen strainer with a pattern not to exceed 1/16".

Need clean dry air supply @ 125 PSI. Will be used for sand blasting small stuff like rusty tools, parts, etc ... where access is difficult ( i.e. nooks and crannies )

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Some recently acquired air die grinders.

A new Ingersol Rand 325XC4A extended shaft, IR 308 ( used ), and a Sioux.

The extended shaft grinder is a steal at $56. The Ebay seller must be crying when I won this no reserve listing since the tool cost $340+ from the online tool sites.

http://www.drillspot.com/products/1324208/Pneumatic_Die_Grinder_325XC4A_Pneumatic_Die_Grinder

Sioux is a Snap On owned company. http://www.siouxtools.com/index.php

Some Pferd Carbide Burrs

and Pferd mounted point stones

will post pics again when these tools go in action

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Moji ... here's the Touch Up gun 1.0mm. Thinking to minimize the use of spray cans. Looks small and easier to clean as well. Just enough for small projects and does not cost an arm and a leg. Sharpe Finex FX-1000.

Will report on air consumption when I get chance to use it.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Got myself a Magswitch 300A Magnetic Ground Clamp for an easier grounding setup.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Ridgid Aluminum pipe wrench

I got surprised with the weight of this thing, felt like it was as light as plastic, which is a good thing especially when doing pipe work under the sink or other hard to reach areas.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Ridgid Faucet and sink installer

For installing faucets where regular wrenches will not work due to cramped spaces.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Ridgid Faucet and sink installer

For installing faucets where regular wrenches will not work due to cramped spaces.

sir, meron ba nito locally?

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Im not sure, you can try emailing Ridgid.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

light duty cordless screwdriver for diy'ers/beginners.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Mga bros, such GREAT TOOLS !!!

Ang gaganda ng mga tools (TOYS) ninyong lahat, congrats !!!!
Nakaka tulo ng laway.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

master jay, sana makita namin ito in action. kailangan namin ito sa tulad naming bumibili ng may kalawang na bakal hehe 😀

I need abrasive media 14 grit or below to try this mini sand blaster. It is recommended to strain the media too through a fine screen strainer with a pattern not to exceed 1/16".

Need clean dry air supply @ 125 PSI. Will be used for sand blasting small stuff like rusty tools, parts, etc ... where access is difficult ( i.e. nooks and crannies )

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Moji ... here's the Touch Up gun 1.0mm. Thinking to minimize the use of spray cans. Looks small and easier to clean as well. Just enough for small projects and does not cost an arm and a leg. Sharpe Finex FX-1000.

Will report on air consumption when I get chance to use it.

Sir JayL ask ko lang po magkano ang bili nitong pang spray

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Sir JayL ask ko lang po magkano ang bili nitong pang spray

Dito ko nabili yan ... mga $88

http://www.amazon.com/Graco-Sharpe-289200A-Mini-HVLP-FX1000-Paint/dp/B0019CJDLK/ref=sr_1_1?ie=UTF8&qid=1318573881&sr=8-1

Re: Show your recent tool purchase/s ( The Tool/s Loot )

My sister came back from her trip and got me this token..

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Facom! :jawdrop: