Re: Show your recent tool purchase/s ( The Tool/s Loot )

My Nihonweld 160A DC Arcwelder P7,345

The prices of DC inverter based arc welders are going down ...

Thanks for sharing Voltaire.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

three titman router bits....naangihan ako..

tested the 3/4 dia, with 2" cutting capacity on the rt...
i have already noticed the low noise it produces, compare to the ez bits and others.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

got hold of this gun...parang ayaw ko na bitawan.
yung finish nya at ang feel when handling is superb..
the weight is ideal ...all i can say is...:2thumbsup:

According to the manufacturer, the paint inlet is M16x1.5P -> male 16mm, 1.5mm thread pitch?

If so then the PPS adapter needed will be this one:

3M™ PPS™ Adapter 2, 16003
Part Number: 16003
UPC: 00051131160033
Stock Number: 60980107357

Adapter converts paint spray guns for use with the 3M™ Paint Preparation System requiring 16 mm Female, 1.5 mm Thread.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Here's another model... HORN PEP HVLP-591G

Talk about low pressure....this gun actually works between 10-28psi

a closer look ... it's a Beefy spray gun and the weight is just remarkable.

Here's a link to the gun's specs... http://www.garden-tool-mower-trimmer.com/591G.htm

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Here are other models of HVLP's by Horn Pep...M3000 HVLP

Re: Show your recent tool purchase/s ( The Tool/s Loot )

an M3000 HVLP 1.4 Tip...

Re: Show your recent tool purchase/s ( The Tool/s Loot )

An M3000 HVLP 1.7 Tip...

Here's a link to the gun's info... http://www.garden-tool-mower-trimmer.com/M3000.htm

and

http://www.autoparts007.com/manufacturers/Products_Url.asp?Company_ID=1512&ProductC_ID=31174

Re: Show your recent tool purchase/s ( The Tool/s Loot )

According to the manufacturer, the paint inlet is M16x1.5P -> male 16mm, 1.5mm thread pitch?

If so then the PPS adapter needed will be this one:

3M™ PPS™ Adapter 2, 16003
Part Number: 16003
UPC: 00051131160033
Stock Number: 60980107357

Adapter converts paint spray guns for use with the 3M™ Paint Preparation System requiring 16 mm Female, 1.5 mm Thread.

The suction inlet is listed as 3/8. Here's a link that might help.. http://www.autoparts007.com/manufacturers/Products_Url.asp?Company_ID=1512&ProductC_ID=31169

I just don't know the thread pitch but when i tested it w/ a standard 3/8 NPT it worked.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

The suction inlet is listed as 3/8. Here's a link that might help.. http://www.autoparts007.com/manufacturers/Products_Url.asp?Company_ID=1512&ProductC_ID=31169

I just don't know the thread pitch but when i tested it w/ a standard 3/8 NPT it worked.

Now I'm confused. Di ba 3/8 NPT for suction, 16x1.5 for gravity?

I'm talking about the G2000 which is a gravity type.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Now I'm confused. Di ba 3/8 NPT for suction, 16x1.5 for gravity?

I'm talking about the G2000 which is a gravity type.

The thread on the Fluid Gravity cup on top is 3/8 NPT/NPS. Suction or gravity they have the same fluid inlet thread. The air inlet is 1/4 NPT/NPS. There are many adapters locally available for your conversion just in case.:eek::D BTW, i hope the adapter you are purchasing is not too thick for the minimal clearance left on the fluid inlet thread. If you noticed the space left is so small there's like a hairline left when you put the cup in place.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

I got me an SDS Hammer from METABO. It's still made in Germany. Might as well post it while it's still fresh and brand new looking. In 2 days it's gonna look like hell when it gets to the job site. At least I have these pictures to remind me of how it looked like when it was new.:D::rolleyes:

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Here's the Model or Series No...

This model can handle up to 24mm bits but it only came with a free set of SDS Bits ranging from 5,6,8 and 10mm.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Metabo .... Work Don't Play ...... these are some serious tools.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Metabo .... Work Don't Play ...... these are some serious tools.

And boy are they expensive.:D I try to buy whatever GERMAN made stock is left from MACHTOOLS, INC. 😎

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Talk about low pressure....this gun actually works between 10-28psi

those are really low pressure fed spray gun...
very nice spray guns...very nice indeed !
marami pa pala akong hindi nakikita ! :rofl::rofl::rofl: