Re: Show your recent tool purchase/s ( The Tool/s Loot )

made of hard plastic..note the deep recess with thicker plastics to resist twisting.

the plastic grip...i will be careful to tighten the screws for i might break the thin sides

the ribbing on the sides btw is shallow for my liking...

but thankfully, Omni has made the housing a bit tapered for better pulling effect.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

and so the story goes upgrading my extension cord..

what about the other end???
i am used to using National/Panasonic or Toshiba brands of receptacles but lately i have found out that they are skimping on materials..(maybe i got some fakes? Wilcon selling fakes? maybe no..)

so for the last three years or so, i have switched to Anam...(
http://www.tradekorea.com/e-catalogue/victor72/products-list.html )

but i swear, they have thicker copper plates inside and the springy character of the plates will provide you with a hole as if it is your first time everytime you insert the plug.

i guess, it is time you upgrade your DC welder plugs and of course your extension cords...

4.5/5 on these two products!

safety first!

Re: Show your recent tool purchase/s ( The Tool/s Loot )

oh btw..mine is 6 pesos at least cheaper than what you've got bro Rosy..anyway, True Value stores are seen in prime lots so expect them to add more premiums on their merchandise..

thanks again bro Rosy for the cool find!

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Copy Bro Rosy. I will check out CoolMax Heric's site. Tnx for the link. I'd appreciate your upcoming review if ever. tnx again and Happy New year!

Yup ! For sure I will be making a break in and a review of this weld machine and will see how tough this one is plus I have been checking the net for the purpose of the "ARC FORCE", how and where will it be used during welding time.

Likewise, Happy New Year too. 😉 :banana1:

Re: Show your recent tool purchase/s ( The Tool/s Loot )

oh btw..mine is 6 pesos at least cheaper than what you've got bro Rosy..anyway, True Value stores are seen in prime lots so expect them to add more premiums on their merchandise..

thanks again bro Rosy for the cool find!

HEHEHE, That's fine with me if I got the plug 6 pesos more, pero naka mura pa rin ako kasi naka pulot ako ng isang 10 peso coin sa parking lot ng mall, LOL

Well V, don't thank me on this, better let's thank OMNI brand for making such product.

CHEERS and Happy New Year !!! ;):banana1::cool:

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Bought this here in baguio na... at carpentrade along magsaysay road. A little bit more expensive than in t. Alonzo... its a bosch GST 8000 E jigsaw to compliment my circular saw. bought it for 6,300 and 120/blade.

Sent from my GT-N7100 using Tapatalk

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Visited my favorite shop here in Baguio to buy some jigsaw blades... came home with this also...

SKIL F30 pneumatic nailer. Got it for P1,600 wala lang brad nails available so have to sort out some...

Sent from my GT-N7100 using Tapatalk

Re: Show your recent tool purchase/s ( The Tool/s Loot )

ganda ng mga laruan sir amboy!...ilang hp (air compressor) ba requirement ng pneumatic nailer nyo sir? salamat

ganda ng mga laruan sir amboy!...ilang hp (air compressor) ba requirement ng pneumatic nailer nyo sir? salamat

Unlike spray guns, pneumatic nailers don't continously use compressed air.

Even a 1/4 hp compressor will suffice.
Posted via PHM Mobile

Re: Show your recent tool purchase/s ( The Tool/s Loot )

copy that sir joey. salamat....dinedebate ko pa kasi sarili ko hanggang ngayon kung 2hp or 1/4 hp ba kukunin ko.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

ganda ng mga laruan sir amboy!...ilang hp (air compressor) ba requirement ng pneumatic nailer nyo sir? salamat

Bro joey is right... using my 1/4 hp vespa compressor to drive the nail gun and it provides more than enough air pressure 🙂

Sent from my GT-N7100 using Tapatalk

Re: Show your recent tool purchase/s ( The Tool/s Loot )

copy that sir joey. salamat....dinedebate ko pa kasi sarili ko hanggang ngayon kung 2hp or 1/4 hp ba kukunin ko.

Well, a 2hp can do what the 1/4 hp can, but the 1/4 hp can't do what the 2hp can.
With 2HP you can spray paint and use other rotary air tools (die grinder, impact driver, etc).

If your budget will allow it, I would recommend the 2HP.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

Well, a 2hp can do what the 1/4 hp can, but the 1/4 hp can't do what the 2hp can.
With 2HP you can spray paint and use other rotary air tools (die grinder, impact driver, etc).

If your budget will allow it, I would recommend the 2HP.

+1 on that. I would go for the 2hp if budget permits too.

Sent from my GT-N7100 using Tapatalk

Re: Show your recent tool purchase/s ( The Tool/s Loot )

+1 din. The Vespa 2 HP better bang for the buck. Once the belt is tensioned properly the pump charges the tank to full capacity and pressure very quickly.

Re: Show your recent tool purchase/s ( The Tool/s Loot )

pinulubi kasi ako ng sasakyan namin netong disyembre. grabe din ang tampo nya. pambili na rin sana ng air compressor yun. pero ok lang ganyan talaga. mahirap naman maging hinete lang.

btw, nagkaroon din kasi ako ng ingersoll rand 231C impact gun lately lang. binenta ng mekaniko ng tatay ko sakin sa halagang di ko sukat akalain na bargain na bargain na pala pagkatapos kong isearch sa net ang presyo. hehe