Re: BarTop Wine Rack

I started this project by milling the kamagong on my shopmade bandsaw.

Re: BarTop Wine Rack

the cut kamagong being sanded on my disc sander.

Re: BarTop Wine Rack

the dimensioned kamagongs.

Re: BarTop Wine Rack

next, I milled my mahogany on the bandsaw again.

Re: BarTop Wine Rack

and these are the mahogany curved vertical posts.

Re: BarTop Wine Rack

Next is the Balayong, here ready to be planed on my thicknesser.

and this is the thicknessed Balayong...you can see the sawdusts are very red..the natural color of this wood specie.

I then processed it on my sliding miter saw for the exact dimensions.

then trimmed on my table saw.

Re: BarTop Wine Rack

next is the Dao for the horizontals.

ripping on my table saw..

ripped..

thicknessed..

and ready for the final dimensions..

Re: BarTop Wine Rack

I went back to my balayong to cut the circles.

here using circle cutter on the drill press.

used my router with roundover bit for the round profile on the holes..

and on the sides..

Re: BarTop Wine Rack

made the channels on the table saw..

and the rabbets..

testing....

so far so good...

Re: BarTop Wine Rack

cutting the excess of the mahogany..

gluing and clamping them together...

testing...

testing again with the bottles in it..

Re: BarTop Wine Rack

now working on the top portion of the rack..

I will use dowels for the joineries..

made the holes on the drill press..

ready for gluing

clamped and glued..

Re: BarTop Wine Rack

testing again the following morning after an overnight clamping.

and this is the current status of my project...almost done..just waiting for the deadline for submission of entries.

Re: BarTop Wine Rack

WOW !!!! bro Armand that is a very beautiful personal wine rack design. Love the way you used different wood species in the project to achieve different wood colors/hues making it very very natural.

Are you still going to include wood notches or some gaps (do not know how it is called) on the kamagong above to hang say two brandy glasses ? I think that will complete the design during the presentation.

Anyway personal opinion ko lang yan. :p

Congratulations on your entry ! 😉

Re: BarTop Wine Rack

WOW !!!! bro Armand that is a very beautiful personal wine rack design. Love the way you used different wood species in the project to achieve different wood colors/hues making it very very natural.

Are you still going to include wood notches or some gaps (do not know how it is called) on the kamagong above to hang say two brandy glasses ? I think that will complete the design during the presentation.

Anyway personal opinion ko lang yan. :p

Congratulations on your entry ! 😉

Thanks bro Rosy..and yes slots will be added for the wine glasses, as in the plan. The top part is not yet glued to the main body, I have to make the holes and slots before I can attached it to the main body.

The kamagong was picked up in a Sierra Madre restaurant in Infanta during one of my motorcycle adventures in Quezon. The balayong came from batangas and the rest are from Taytay.